Warning: Any changes made to this equipment without permission may cause
damages to the device!
IMPORTANT NOTICE
1. IP Kamera s was designed for indoor use, it is the responsibility of the user for any possible
damages caused by outdoor use, especially in the rain.
2. Please use the power adapter provided by the dealer, the manufacturer responsibility for the
possible damage from using power adapters not .
3. Do not shake the IP Kamera 9070-Lite in any fashion
4. Please contact the dealer If IP Kamera 9070-Lite is not working properly.
The IP Kamera 9070-Lite provides reliable, high quality solution to IP Kameras. Its distinctive 720P HD
quality picture, Tri-mode video capability, RTSP broadcasting capability, wide angle lens, and additional
functionality makes this small device very powerful and unique.
Using innovative IP technology, the built in web server of the IP Kamera 9070-Lite will allo w you to view your
IP Kamera from any remote locations around the world while bringing you world class surveillanc e and ease
of mind. Furthermore, with CNT technology the 9070-Lite is easy to setup & use, simply just plug and play.
Minimum System Requirements
CPU Minimum Requirements
• Intel(R), Pentium(R), DUAL Core (D),CPU 3.0GHz or equivalent
• Operating Systems: WINDOWS Operating Systems (IE5.0+SPI)
• 512 MB system memory or above
• Video Card: 3D hardware accelerator card required – 100% DirectX 9.0c compatible
• 10/100 Ethernet switch/hub
• Sound Card: DirectX 9.0c compatible sound card
• Ethernet network port/card
• Network cable
• Internet (For remote access) or Ethernet Network (Internal Network use) with some type of Internet
connection, (i.e. ADSL, Cable, Dial up or any other forms of Internet service)
Software
• VLC media player 0.8.6b or above.
• Windows XP Service Pack 2 or above.
• Resolution of screen setting: 1280x960 or higher for the display of 720P
- 5-
Ref#90020326K0709
2.) Product Overview
Features
1. Tri-Mode Camera (MPG4-1/MPEG4-2/M-Jpeg )
2. Advance Motion detection trigger AVI /Jpeg save on FTP / Email
3. 3 layers (Admin, Operator, and User) Password protected
4. Resolution from CIF 352x192 up to HD 1280x720P
5. Supports NTP protocol to get correct time schedule.
6. 1/2.5” Advance CMOS sensor, with highly sensibility for quick response insufficient lighting.
7. Supports HTTP CGI command set. Easy for system integration
8. IP Service Search utility, to find your IP Kamera on internet with ease
9. Watchdog / Event log design
10. Adjustable frame-rate, bit-rate, rate-control type, quality factor for best image quality and spee d.
11. Supports date and time marking on the captured video, and also inserted streamed data.
12. Measured End-to-End latency is less than 150ms
16. CNT Technology – Just Plug and Play no need to port forward
17. EPTZ – Electronic Pan, Tilt, and Zoom
18. Scheduler recording capabilities.
19. Email Capabilities
20. Supports: HTTP Web Server (HTTP), SSL, FTP client, SMTP client, NTP client, DHCP client,
UPnP client, RTSP over UDP, RTP
Specification
Casing: Lightweight plastic
Case Color: Black
Weight: 105 Grams (0.231 Lbs)
Dimensions (W x L x H): 108 X 58 X 28mm
Operating Conditions: 5 – 50 °C (41 – 122 °F)
Humidity 20 – 80% RH
(non-condensing)
Power: AC Adaptor
Input: 100-240V~0.3A MAX 10-20VA, 50-60Hz
Output: +5V 1.0A Max 5W
- 6-
Ref#90020326K0709
Package Contents
1.) 9070-Lite Unit x 1
2.) 9070-Lite Installation CD
3.) AC Adapt or
4.) Camera Mounting Bracket
5.) RJ45 Cable x 1 (Optional)
(One AC adaptor will be included and will correspond
to the countries power standards)
Specs:
Input: 100-250Vac /47-63Hz, 1A
Output: 5Vdc/1A
- 7-
Ref#90020326K0709
3.) Interface Description
Rear Panel View
Rear View
Device Reset:
Video Out:
RJ45 Ethernet:
DC 5 V Power Input:
- 8-
Reset to Manufacturer Default:
Hold Reset button for 5-10 Seconds and the device
will reset to manufacturer default
The Video out requires a RCA connector to output
video to a different source.
Plug in the RJ45 Ethernet cable to the Ethernet port
Plug in the Power Adapter to the DC 5V
Ref#90020326K0709
4.) Hardware Setup
*Before setup the device make sure of the following:
1.) Make sure that all the package contents are all included
if anything is missing please contact the store or your distributor.
2.) Make sure the power adaptor is the correct specification.
3.) Make sure that all the cables are working correctly
Internet Accessible Setup
The internet connection can be setup in two main ways so that the 9070-Lite can be accessed
through the internet
a.) My network uses a Router/Firewall to connect each device to the internet
In this case, the 9070-Lite will need to be port forwarded on the router so that it can accessed by
the internet.
For example
9070-Lite IP Address: 192.168.1.882
9070-Lite Port: 9070
On the router that is being used port forwarded (port triggered) IP Address 192.168.1.882 and
port 9070. For this section you may be required to refer the user manual for the router due to the
fact that each router has a different way of setting up the device.
Note: Please refer to page: 43 on how to use CNT (Cross Network Technology). With CNT no
port forwarding is required to view the camera. But for normal functionality please use the web
browser to view the camera.
b.) My internet uses a static IP Address provided by the ISP.
- 9-
Ref#90020326K0709
In this case, the 9070-Lite is being connected to the internet through a hub, which is different from
a router. The hub does not provide DHCP, and therefore would require that this setup have a
static IP Address that is provided by the ISP.
Contact the ISP to find out the static IP address so that your device can be accessed through the
internet. Once a Static IP has been assigned the device will be able to automatically go onto the
internet. .
Connecting the Device
1.) Connect the IP Kamera 9070-Lite to a HUB or Router with a RJ45 network cable.
2.) Connect the HUB or Router to the internet (May through ADSL/XDSL modem).
3.) Connect the power adapter to the DC 5V port of IP Kamera 9070-Lite.
5.) Software Setup
The software for the device is located on the Media Link-IP Family CD that came with the device.
IP Kamera Pack is located on the main page of the CD. Please follow the directions carefully and
install the necessary files
Software for IP Kamera 9070-Lite
1.) First place the Media Link-IP Family CD that came with your device into your CD/DVD Rom drive.
The CD should auto run but if it does not go to the CD/DVD Rom drive and select the file
“autorun.html”.
- 10-
Ref#90020326K0709
2.) Select the IP Kamera section and pick the IP Kamera and Model that you are using.
3.) Download the following software and save them to the appropriate locations.
a. IPEdit - Device search tool which allows you to modify IP settings, find your on the local
network and IP Service.
b. Surf 16 CH – 16 Channel DVR, Monitoring, & Recording Software. Views up to 16
channels on one screen.
- 11-
Ref#90020326K0709
4.) Once installation is complete please double click the IPEdit to configure and search for your device.
Installing VLC Codec
The files that are recorded by the 9070-Lite requires this codec so that you are able to view the view.
Download the latest version of the VLC codec and install it into your computer. You can find the latest
version of the codec from here
http://www.videolan.org/
Using IP Edit
IPEdit is a search tool designed to setup and access the IP Kamera 9070-Lite.
IP Service is an additional feature which searches for the device easily without having to remember long
complicated IP addresses. Instead, this technology allows the user find his or her device through the internet
just by device name.
Note: Please allow the IP Kamera 9070-Lite 1 to load before using IPEdit.
Default IP: 192.168.1.168 (When 9070-Lite is connected to PC directly)
Default Login: Admin
Default Password: 12345678
1.) Double click on the IPEdit icon to run the program.
2.) Open IPEdit and any device in the same network should automatically be detected and listed in the
local devices sections.
Note: If the device is not showing up, please hit the rescan button and wait about 1 minute
- 12-
Ref#90020326K0709
Setup the Device:
All devices will need to be on the same network if not the device cannot be accessed and will not be
detected.
Quick Easy Setup (Recommended)
1.) Click on the REF button, and wait a few seconds. IPEdit will automatically
detect the network settings and setup the device.
2.) Once settings have been detected hit the apply button to apply the new settings.
3.) Hit yes to confirm and Enter the login and password for the Device to Approve changes
4.) Then hit the rescan button on IPEdit to confirm the changes have been made.
- 13-
Ref#90020326K0709
Custom Setup (Advance Users)
1.) Highlight the device on the local devices section and on the right side of IPEdit all network
information on the device will be displayed.
If the device is not on the same network a Red Exclamation mark
Network information section
2.) To setup the device, you will need type in the correct Gateway and IP Address.
The Gateway Address: The gateway address can be obtained in Windows under the network
connections page
will appear in the IP
IP Address: Make sure the first 3 sections of the IP Address matches the gateway address.
Example: Gateway Address – 192.168.1.1 IP Address – 192.168.1.xxx
3.) Once the Default Gateway information has been obtained, enter the correct information
into IPEdit and hit the submit button.
- 14-
Ref#90020326K0709
Loading...
+ 31 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.