Warning: Any changes made to this equipment without permission may cause damages to the
device!
IMPORTANT NOTICE
1. IP Kamera 9070-CSWO/CSO was designed for indoor use, the manufacturer responsibility for
possible damages caused by outdoor use, especially in the rain.
2. Please use the power adapter provided by the dealer, the manufacturer responsibility for the
possible damage from using power adapters not.
3. Do not shake the IP Kamera 9070-CSWO/CSO in any fashion
4. Please contact the dealer If IP Kamera 9070-CSWO/CSO is not working properly.
SYSTEM ................................................................................................................................. 37
DATE AND TIME ................................................................................................................................. 38
TIME STAMP ..................................................................................................................................... 38
USER ............................................................................................................................................... 39
NIGHT VISION ................................................................................................................................... 39
DEVICE TUNE UP ............................................................................................................................... 40
LANGUAGE SETTINGS .......................................................................................................................... 40
The IP Kamera 9070-CSWO/CSO provides reliable, high quality solution to IP Kamera’s. The distinctive
720P HD quality picture, Tri-mode video capability, RTSP broadcasting capability, wireless N 802.11n
(9070-CSWO only) connectivity, electronic IR switching filter, and other functions makes this small device
very powerful and unique.
Using innovative IP technology, the built in web server of the IP Kamera 9070-CSWO/CSO will allow you to
view your IP Kamera from any remote locations around the world while bringing you world class surveillance
and ease of mind. Furthermore, with CNT technology the 9070-CSWO/CSO is easy to setup & use, simply
just plug and play.
- 6-
Ref#201008109070CSWO
Minimum System Requirements
CPU Minimum Requirements
Intel(R), Pentium(R), DUAL Core (D),CPU 3.0GHz or equivalent
Operating Systems: WINDOWS Operating Systems (IE5.0+SPI)
512 MB system memory or above
Video Card: 3D hardware accelerator card required – 100% DirectX 9.0c compatible
10/100 Ethernet switch/hub
Sound Card: DirectX 9.0c compatible sound card
Ethernet network port/card
Network cable
Internet (For remote access) or Ethernet Network (Internal Network use) with some type of Internet
connection, (i.e. ADSL, Cable, Dial up or any other forms of Internet service)
Software
VLC media player 0.8.6b or above.
Windows XP Service Pack 2 or above.
Resolution of screen setting: 1280x960 or higher for the display of 720P
2.) Product Overview
Features
1. Compatible with all standard 1/3‖ CS lens
2. Electronic Switching Infrared Filter for Night Vision
3. Wireless N 802.11n connectivity (9070-CSWO only)
4. Tri-Mode Camera (MPG4-1/MPEG4-2/M-Jpeg )
5. Advance Motion detection trigger AVI /Jpeg save on FTP / SD card or Email
6. 3 layers (Admin, Operator, and User) Password protected
7. Resolution from CIF 352x192 up to HD 1280x720P
8. Supports NTP protocol to get correct time schedule.
9. 1/2.5‖ Advance CMOS sensor, with highly sensibility for quick response insufficient lighting.
10. Supports HTTP CGI command set. Easy for system integration
11. IP Service Search utility, to find your IP Kamera on internet with ease
12. Watchdog / Event log design
13. Adjustable frame-rate, bit-rate, rate-control type, quality factor for best image quality and speed.
14. Supports date and time marking on the captured video, and also inserted streamed data.
15. Measured End-to-End latency is less than 150ms
23. Supports: HTTP Web Server (HTTP), SSL, FTP client, SMTP client, NTP client, DHCP client,
UPnP client, RTSP over UDP, RTP
Specification
Casing: Reinforced Aluminum
Case Color: Midnight Grey
Weight: 332g
Dimensions (W x L x H): 7cm x 14cm x 4.5cm
Operating Conditions: 5 – 50 °C (41 – 122 °F)
Storage Conditions: Humidity 20 – 80% RH
Power: AC Adaptor
Input: 100-240V~0.3A MAX 10-20VA, 50-60Hz
Output: +5V 1.0A Max 5W
- 7-
Ref#201008109070CSWO
Package Contents
1.) 9070-CSWO/CSO Unit or 9070-CSO
2.) CS Lens
Lens Specifications
1.) Format: 1/3‖
2.) EFFL: 6MM
3.) Image Space F/#: F1.2
4.) Field Angle: 58 degree
5.) Stop: Fixed
6.) Focus Extension: 20cm--∞
7.) Mount; CS
8.) Outside dimensions: 30 x 31.7
3.) 9070-CSO/CSWO Installation CD
4.) AC Adaptor
(One AC adaptor will be included and will correspond to the
countries power standards)
Specs:
Input: 100-250Vac /47-63Hz, 1A
Output: 5Vdc/1A
5.) RJ45 Cable x 1
6.) Wireless 802.11N dongle antenna
(9070-CSWO only)
7.) Camera Mounting Bracket
- 8-
Ref#201008109070CSWO
Rear View
Reset Button:
Reset to Manufacturer Default:
Hold Reset button for 5-10 Seconds and the device
will reset to manufacturer default
Video Out:
The Video out requires a BNC connector to output
video to a different source.
RJ45 Ethernet:
Plug in the RJ45 Ethernet cable to the Ethernet port
DC 5V Power Input:
Plug in the Power Adapter to the DC 5V
USB
The USB is for the wireless Dongle
(9070-CSWO only)
Note: Only compatible with assigned Wireless Dongle
3.) Interface Description
Rear Panel View
- 9-
Ref#201008109070CSWO
4.) Hardware Setup
*Before setup the device make sure of the following:
1.) Make sure that all the package contents are all included
if anything is missing please contact the store or your distributor.
2.) Make sure the power adaptor is the correct specification.
3.) Make sure that all the cables are working correctly
Internet Accessible Setup
The internet connection can be setup in two main ways so that the 9070-CSWO/CSO can be
accessed through the internet
Router / Firewall Setup
Using a Router/Firewall to connect each device to the internet
Note: The device needs to be port forwarded on the router so that it can be accessed by the
internet.
For example
9070CSO/CSWO IP Address: 192.168.1.882
9070CSO/CSWO Port: 9070
On the router that is being used port forwarded (port triggered) IP Address 192.168.1.882 and
port 9070. For this section you may be required to refer the user manual for the router due to the
fact that each router has a different way of setting up the device.
Note: Please refer to page: 43 on how to use CNT (Cross Network Technology). With CNT no
port forwarding is required to view the camera. But for normal functionality please use the web
browser to view the camera.
- 10-
Ref#201008109070CSWO
Static IP Setup
Static IP Address provided by the ISP.
In this case, the 9070-CSWO/CSO is being connected to the internet through a hub, which is
different from a router. The hub does not provide DHCP, and therefore would require that this
setup have a static IP Address that is provided by the ISP.
Contact the ISP to find out the static IP address so that your device can be accessed through the
internet. Once a Static IP has been assigned the device will be able to automatically go onto the
internet. .
Connecting the Device
1.) Connect the IP Kamera 9070 to a HUB or Router with a RJ45 network cable.
2.) Connect the HUB or Router to the internet (May through ADSL/XDSL modem).
3.) Connect the power adapter to the DC 5V port of IP Kamera 9070.
- 11-
Ref#201008109070CSWO
5.) Software Setup
The software for the device is located on the Media Link-IP Family CD that came with the device.
IP Kamera Pack is located on the main page of the CD. Please follow the directions carefully and
install the necessary files
Software
1.) First place the Media Link-IP Family CD that came with your device into your CD/DVD Rom drive.
The CD should auto run but if it does not go to the CD/DVD Rom drive and select the file
―autorun.html‖.
2.) Select the IP Kamera section and pick the IP Kamera and Model that you are using.
- 12-
Ref#201008109070CSWO
3.) Download the following software and save them to the appropriate locations.
a. IP Edit - Device search tool which allows you to modify IP settings, find your on the local
network and IP Service.
b. Surf 16 CH – 16 Channel DVR, Monitoring, & Recording Software. Views up to 16
channels on one screen.
c. Surf Pop – Surf Pop is a new interactive IP Kamera monitoring software
4.) Once installation is complete please double click the IP Edit to configure and search for your
device.
Installing VLC Codec
The files that are recorded by the 9070-CSWO/CSO requires this codec so that you are able to view the
view.
Download the latest version of the VLC codec and install it into your computer. You can find the latest
version of the codec from here
http://www.videolan.org/
- 13-
Ref#201008109070CSWO
IP Edit
IP Edit is a search tool designed to setup and access the IP Kamera 9070-CSWO/CSO.
IP Service is an additional feature which searches for the device easily without having to remember long
complicated IP addresses. Instead, this technology allows the user find his or her device through the internet
just by device name.
Note: Please allow the IP Kamera 9070-CSWO/CSO 1 to load before using IP Edit.
Default IP: 192.168.1.168 (When 9070 is connected to PC directly)
Default Login: Admin
Default Password: 12345678
1.) Double click on the IP Edit icon to run the program.
2.) Open IP Edit and any device in the same network should automatically be detected and listed in
the local devices sections.
Note: If the device is not showing up, please hit the rescan button and wait about 1 minute
Setup the Device:
All devices will need to be on the same network if not the device cannot be accessed and will not be
detected.
- 14-
Ref#201008109070CSWO
Quick Easy Setup (Recommend for Beginner Users)
1.) Click on the REF button, and wait a few seconds. IP Edit will automatically
detect the network settings and setup the device.
2.) Once settings have been detected hit the apply button to apply the new settings.
3.) Hit yes to confirm and Enter the login and password for the Device to Approve changes
4.) Then hit the rescan button on IP Edit to confirm the changes have been made.
- 15-
Ref#201008109070CSWO
Custom Setup (Advance Users)
1.) Highlight the device on the local devices section and on the right side of IP Edit all network
information on the device will be displayed.
If the device is not on the same network a Red Exclamation mark will appear in the IP
Network information section
2.) To setup the device, you will need type in the correct Gateway and IP Address.
The Gateway Address: The gateway address can be obtained in Windows under the network
connections page
IP Address: Make sure the first 3 sections of the IP Address matches the gateway address.
Example: Gateway Address – 192.168.1.1 IP Address – 192.168.1.xxx
3.) Once the Default Gateway information has been obtained, enter the correct information
into IP Edit and hit the submit button.
- 16-
Ref#201008109070CSWO
4.) Then hit the rescan button on IP Edit to confirm the changes have been made.
- 17-
Ref#201008109070CSWO
Setting up Wireless Settings
Step by Step (Recommended):
1.) Next go to the network settings on the bottom and select Wireless. A new window
should pop up with the wireless settings.
2.) Select the Step by Step option on the wireless screen.
3.) Click on the for more information on how to setup the device.
4.) Pick the router that you are using, then hit the add profile button
5.) Type in the passphrase for the router and hit the apply button.
6.) Wait about 60 seconds for device to connect.
7.) Then check to see for the connection successful under the connection status and the device is good to
go.
- 18-
Ref#201008109070CSWO
8.) Unplug the RJ45 cable of the device and search on IP Edit for the new wireless settings. You will see a
(W) next to your device in IP Edit which means wireless is activated. If the RJ45 cable is not disconnect
you will see two IP Address on the device.
Advance Setup:
Click on the On Link under advance section
Click on the Site Survey Link
Then select the Interface Name and select the EDIMAX radial button, then click up.
Next select the wireless internet network that you would like to connect to and hit the add profile button to
add a new profile
- 19-
Loading...
+ 44 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.