AVer 300AF quick guide
A
VerVision
300AF
Quick Guide
1. Connect the Power.
LIGHT
BOX
VGAOUTVGAINDC12V
Power adapter
2. Select the video display output.
VIDEO S-VIDEO DVI
VIDEO S-VIDEO DVI
TV RGB
TV RGB
Switch AVerVision Port Device
a. RGB
b. TV
a. RGB Connection
LIGHT
BOX
VGAOUTVGAINDC12V
VGA OUT
S-VIDEO
Power cord
LCD/DLP projector
Television
3. Connect a desktop or portable computer (discretional).
- Make sure to connect the other end of the RGB cable to
the VGA(RGB) output port of the computer.
Wall outlet
- Press button to display image from VGA IN port of
AVerVision 300AF.
- For portable computer, make sure to switch your
computer to send signal to external output. Usually the
keyboard command is Fn+F5. If not, please check with
your computer handbook or contact the technical support
of your computer manufacturer.
LIGHT
BOX
VGAOUTVGAINDC12V
Desktop Computer
RGB Cable
Portable Computer
4. Basis Operation
z Press the zoom
and to
zoom in and zoom
out the image.
z Press to
RGB cable
(VGA Cable)
LCD/DLP projector
b. TV Connection
VIDEO S-VIDEO DVI
VIDEO S-VIDEO DVI
TV RGB
TV RGB
INPUT
S-Video to SCART cable
S-Video cable
SCART
S-VIDEO
Television
adjust the focus
automatically.
z Press to
capture and save
the image in the
built-in memory.
A
VerVision
300AF
Quick Guide
z Press to
display the image
in BW, Negative or
Color in Camera
and Playback mode
only.
z Press to
pause or resume
the live image in
camera mode.
z Press to
switch to Camera
mode.
The image from the
built-in camera will
be displayed.
z Press to
switch to PC mode.
The image coming
from the VGA IN
port will be
displayed.
z Press to
switch to Playback
mode.
The captured
image stored in the
built-in memory
will be displayed.
z Use the up,
down, left, and
right to
navigate the
picture in Playback
mode and OSD
menu selection.
z Press right to
enter or make a
selection.
z Press to call
up the menu OSD.
For more details,
please refer to user
manual that comes
with AVerVision
Loading...