Avaya NP-4046-300- NetVision Telephone User Manual

Business Communications Manager
Symbol NetVision
IP Telephone Feature Card

(Model #: NP-4046-300)

© 2002 No r tel Networ ks

P0995825 03

Trademarks

NORTEL NETWORKS and Busin ess Communications Manager ar e
trademarks of Nortel Networks.

Symbol, Spe ctrum24, and Net Vision are trademarks of Symbol
Technologies, Inc.

NetVision qui ck start cal l basi cs

A handset user guide is supplied with each Symbol® NetVision handset which describes, in detail,
how to use the buttons on the handset, including any data-related buttons found on the NetVision
Data phone. The buttons described here are for the NetVision Model #: NP-4046-300 handset.

Logging into and out of the network

Logging in: Logging out:

Press to turn the handset on. Press and hold to turn the handset off.

Enter your PIN number, and press .

Quick start hints

You must be logged into the network:

Make call: Enter number and press . Answer Call: Press .

End call or feature: Press .
To Hold or Unhold a call, or to toggle
between two calls:Press .

To Hold the call and drop the link so someone

else can pick it up, press .
To recover a held call from a dropped link,

press: .

If you pressed to silence a ringing call, to

retrieve the call, press or

choose Off-hook, if it is programmed into
the menu.
Note: This sequence also produces a dial tone
on an idle telephone.

Active handset display

The handset display shown below is from the Model #: NP-4046-300 NetVision handset. If you have
a NetVision data telephone or an older version of the handset, the shape of the display may have a
different appearance, and the icons may be slightly different, however, the information is the same:

Radio signal strength indicator

User Login

Name

Battery strength indicator

Call information

Page 3