Avaya MM323 User Manual

MM323 | Cup Holder Mount for Magellan®, Mio®, and Navman® GPS Devices

OPEN

Package Contents:

(1) CM033-2 - Cup holder pedestal mount (1) APMM300 - Dual-T to Mio Moov 300 pattern adapter plate

Compatible with:

• Magellan Maestro: 3100, 3140, 3200, 3210, 3220, 3225, 3250, 4000, 4010, 4040, 4050,

CM033-2 Cup holder mount

APMM300 Dual-T Adapter Plate

Patent Pending

4210, 4215, 4200, 4220, 4245, 4250, 4350, 4370, 4700, 5310, and 5340

• Magellan RoadMate: 1200, 1210, 1212, 1215, 1220, 1230, 1340, 1400, 1412, 1430, 1440, 1470, 1475T, 2000, 2200T, 2250T, 300, 3000T, 3050T, 360, 500, 500 Plus, 6000T, 700, 760, 800, and 860T

• Magellan Triton: 1500, 200, 2000, 300, 400, and 50 0

• Magellan Crossover: GPS 2500T

• Mio Moov: 300, 301, 310, 330, 330 Europe, 360, 370 Europe, 380, 500, and Knight Rider Ed.

• Navman: S50, S50 3D, S70, S90i

Do not place mount in or near an air bag deployment zone or where it will obstruc t view of the road.

Cup Holder Mount Installation

Step 1.

Connect the post (A) to the cup holder base (B) by aligning the groove on the base to the ridge inside the bottom of the post.

(D) Angle adjustment nut

Step 2.

Place the universal cup holder mount into the designated cup holder in the vehicle. Adjust the thumbwheel adjuster (C) to expand or close the cup holder prongs to  t in the cup holder.

Step 3.

For oversize cup holder openings or the adjustable “pop out” cup holders use the optional self-adhesive side support pads (E). Install the pads by removing the adhesive backing and placing it on the  at surface side of the cup holder support leg.

(E) Optional support

CLO

pads

(B) Cup Holder Base

...continued from previous column

(A) Cup Holder Post

Step 2. Insert the adapter plate with power cord into the vertical

groove pattern on the back of the GPS device (not included, sold separately.)

Connect GPS Device to Cup Holder Mount

Step 1. Attach the device to the cup holder mount by inserting the

dual T-Tabs on the pedestal head (F) into the T-slots on the back of the adapter plate (G).

(F)

(G)

Dual-T Device Attachment

Step 1. If your Magellan device has dual-T slots on the back, attach

the GPS unit to the cup holder mount by connecting the dual T-slot s (H) to the dual T-tabs of the mount head (I).

Connect Power Cord to Adapter Plate and Device Attachment

Step 1. Insert the power cord (not included, sold separately) into the

grooved slot in the bottom of the adapter plate.

All brand n ames and produc t names are tradem arks or registe red trademark s of their respe ctive owners.

Safety Precautions

Do not install Arkon products over an air bag cover or within the air bag deployment zone. Arkon Resources, Inc. assumes no responsibility of liability for injury or death as a result of car crashes and / or air bag deployment.

Arkon is not responsible for any damages caused to your car, your device, or yourself due to the installation or use of this pedestal mount.

The Mobile Mounting Specialists™

Consumer Hotline:

USA (800) 841-0884 INT’L (626) 254-9005

Monday - Friday 9 am - 5 pm, PST

(I)

(H)

www.arkon.com

Arcadia, CA 91006 USA

Designed in USA | Made in Taiwan