Avaya ERS 4500 Service Manual
Installation
Avaya Ethernet Routing Switch 4500
Series
NN47205-300 , 04.02
November 2010
5.3
©
2010 Avaya Inc.
All Rights Reserved.
Notice
While reasonable efforts have been made to ensure that the
information in this document is complete and accurate at the time of
printing, Avaya assumes no liability for any errors. Avaya reserves the
right to make changes and corrections to the information in this
document without the obligation to notify any person or organization of
such changes.
Documentation disclaimer
“Documentation” means information published by Avaya in varying
mediums which may include product information, operating instructions
and performance specifications that Avaya generally makes available
to users of its products. Documentation does not include marketing
materials. Avaya shall not be responsible for any modifications,
additions, or deletions to the original published version of
documentation unless such modifications, additions, or deletions were
performed by Avaya. End User agrees to indemnify and hold harmless
Avaya, Avaya's agents, servants and employees against all claims,
lawsuits, demands and judgments arising out of, or in connection with,
subsequent modifications, additions or deletions to this documentation,
to the extent made by End User.
Link disclaimer
Avaya is not responsible for the contents or reliability of any linked Web
sites referenced within this site or documentation provided by Avaya.
Avaya is not responsible for the accuracy of any information, statement
or content provided on these sites and does not necessarily endorse
the products, services, or information described or offered within them.
Avaya does not guarantee that these links will work all the time and has
no control over the availability of the linked pages.
Warranty
Avaya provides a limited warranty on its Hardware and Software
(“Product(s)”). Refer to your sales agreement to establish the terms of
the limited warranty. In addition, Avaya’s standard warranty language,
as well as information regarding support for this Product while under
warranty is available to Avaya customers and other parties through the
Avaya Support Web site:
you acquired the Product(s) from an authorized Avaya reseller outside
of the United States and Canada, the warranty is provided to you by
said Avaya reseller and not by Avaya.
Licenses
THE SOFTWARE LICENSE TERMS AVAILABLE ON THE AVAYA
WEBSITE, HTTP://SUPPORT.AVAYA.COM/LICENSEINFO/ ARE
APPLICABLE TO ANYONE WHO DOWNLOADS, USES AND/OR
INSTALLS AVAYA SOFTWARE, PURCHASED FROM AVAYA INC.,
ANY AVAYA AFFILIATE, OR AN AUTHORIZED AVAYA RESELLER
(AS APPLICABLE) UNDER A COMMERCIAL AGREEMENT WITH
AVAYA OR AN AUTHORIZED AVAYA RESELLER. UNLESS
OTHERWISE AGREED TO BY AVAYA IN WRITING, AVAYA DOES
NOT EXTEND THIS LICENSE IF THE SOFTWARE WAS OBTAINED
FROM ANYONE OTHER THAN AVAYA, AN AVAYA AFFILIATE OR AN
AVAYA AUTHORIZED RESELLER; AVAYA RESERVES THE RIGHT
TO TAKE LEGAL ACTION AGAINST YOU AND ANYONE ELSE
USING OR SELLING THE SOFTWARE WITHOUT A LICENSE. BY
INSTALLING, DOWNLOADING OR USING THE SOFTWARE, OR
AUTHORIZING OTHERS TO DO SO, YOU, ON BEHALF OF
YOURSELF AND THE ENTITY FOR WHOM YOU ARE INSTALLING,
DOWNLOADING OR USING THE SOFTWARE (HEREINAFTER
REFERRED TO INTERCHANGEABLY AS “YOU” AND “END USER”),
AGREE TO THESE TERMS AND CONDITIONS AND CREATE A
BINDING CONTRACT BETWEEN YOU AND AVAYA INC. OR THE
APPLICABLE AVAYA AFFILIATE (“AVAYA”).
http://support.avaya.com. Please note that if
Copyright
Except where expressly stated otherwise, no use should be made of
materials on this site, the Documentation, Software, or Hardware
provided by Avaya. All content on this site, the documentation and the
Product provided by Avaya including the selection, arrangement and
design of the content is owned either by Avaya or its licensors and is
protected by copyright and other intellectual property laws including the
sui generis rights relating to the protection of databases. You may not
modify, copy, reproduce, republish, upload, post, transmit or distribute
in any way any content, in whole or in part, including any code and
software unless expressly authorized by Avaya. Unauthorized
reproduction, transmission, dissemination, storage, and or use without
the express written consent of Avaya can be a criminal, as well as a
civil offense under the applicable law.
Third-party components
Certain software programs or portions thereof included in the Product
may contain software distributed under third party agreements (“Third
Party Components”), which may contain terms that expand or limit
rights to use certain portions of the Product (“Third Party Terms”).
Information regarding distributed Linux OS source code (for those
Products that have distributed the Linux OS source code), and
identifying the copyright holders of the Third Party Components and the
Third Party Terms that apply to them is available on the Avaya Support
Web site:
Trademarks
The trademarks, logos and service marks (“Marks”) displayed in this
site, the Documentation and Product(s) provided by Avaya are the
registered or unregistered Marks of Avaya, its affiliates, or other third
parties. Users are not permitted to use such Marks without prior written
consent from Avaya or such third party which may own the Mark.
Nothing contained in this site, the Documentation and Product(s)
should be construed as granting, by implication, estoppel, or otherwise,
any license or right in and to the Marks without the express written
permission of Avaya or the applicable third party.
Avaya is a registered trademark of Avaya Inc.
All non-Avaya trademarks are the property of their respective owners,
and “Linux” is a registered trademark of Linus Torvalds.
Downloading Documentation
For the most current versions of Documentation, see the Avaya
Support Web site:
Contact Avaya Support
Avaya provides a telephone number for you to use to report problems
or to ask questions about your Product. The support telephone number
is 1-800-242-2121 in the United States. For additional support
telephone numbers, see the Avaya Web site:
http://support.avaya.com/Copyright.
http://support.avaya.com.
http://support.avaya.com.
2 Installation November 2010
Contents
Chapter 1: Avaya Ethernet Routing Switch 4500 regulatory information and safety
precautions................................................................................................................................5
International regulatory statements of conformity.............................................................................................5
National electromagnetic compliance (EMC) statements of compliance..........................................................5
FCC statement (USA only)................................................................................................................................5
ICES statement (Canada only).........................................................................................................................6
CE marking statement (Europe only)................................................................................................................6
European Union and European Free Trade Association (EFTA) notice............................................................7
VCCI statement (Japan/Nippon only)................................................................................................................7
BSMI statement (Taiwan only)..........................................................................................................................8
MIC notice (Republic of Korea only).................................................................................................................8
National Safety Statements of Compliance.......................................................................................................8
EN 60950 statement.........................................................................................................................................8
NOM statement (Mexico only)...........................................................................................................................8
Información NOM (unicamente para México)...................................................................................................9
Denan statement (Japan/Nippon only)............................................................................................................10
National Environmental Statements of Compliance........................................................................................10
Restriction on Hazardous Substances Directive Compliance Statement........................................................10
WEEE Directive Compliance Statement..........................................................................................................11
Chapter 2: New in this release...............................................................................................13
Features..........................................................................................................................................................13
Chapter 3: Introduction...........................................................................................................15
Avaya Ethernet Routing Switch 4500 Series...................................................................................................15
Navigation.......................................................................................................................................................16
Chapter 4: Installing the Avaya Ethernet Routing Switch...................................................17
Electrostatic discharge....................................................................................................................................17
Environmental requirements...........................................................................................................................19
Package contents............................................................................................................................................20
Installing the Avaya Ethernet Routing Switch 4500 Series on a table or shelf................................................21
Installing the Avaya Ethernet Routing Switch 4500 Series in an equipment rack...........................................22
Cable requirements for the Avaya Ethernet Routing Switch 4500 Series.......................................................24
Installation and removal of Small Form-factor Pluggable (SFP) transceivers.................................................25
RJ-45 connector pin assignments...................................................................................................................27
Console port pin assignments.........................................................................................................................31
Universal Serial Bus (USB) ports....................................................................................................................31
Power specifications for the Avaya Ethernet Routing Switch 4500 Series.....................................................32
Avaya Ethernet Routing Switch Redundant Power Supply 15 power specification........................................34
Connect AC power..........................................................................................................................................35
Check Light Emitting Diode (LED) on the Avaya Ethernet Routing Switch 4500 Series.................................37
Set IP parameters for the Avaya Ethernet Routing Switch 4500 Series.........................................................45
Set IP parameters using IP.CFG file on a USB memory device.............................................................48
Set IP parameters using bootp...............................................................................................................51
Setting IP parameters using the Web-based Management Interface.....................................................52
Avaya Ethernet Routing Switch 4500 series stacking.....................................................................................53
Stack connector......................................................................................................................................53
Stack configurations........................................................................................................................................59
Installation November 2010 3
Chapter 5: Translations of safety messages........................................................................63
4 Installation November 2010
Chapter 1: Avaya Ethernet Routing Switch
4500 regulatory information and
safety precautions
International regulatory statements of conformity
This is to certify that the Avaya Ethernet Routing Switch 4500 Series was evaluated to the
international regulatory standards for electromagnetic compliance (EMC) and safety and were
found to have met the requirements for the following international standards:
• EMC - Electromagnetic Emissions - CISPR 22, Class A
• EMC - Electromagnetic Immunity - CISPR 24
• Electrical Safety - IEC 60950, with CB member national deviations
Further, the equipment has been certified as compliant with the national standards as detailed
below.
National electromagnetic compliance (EMC) statements of compliance
FCC statement (USA only)
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These limits are
designed to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy. If it is not installed and used in accordance with the instruction manual,
it may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference, in which case users will be required to
take whatever measures may be necessary to correct the interference at their own expense.
Installation November 2010 5
Avaya Ethernet Routing Switch 4500 regulatory information and safety precautions
ICES statement (Canada only)
Canadian Department of Communications Radio Interference
Regulations
This digital apparatus (Avaya Ethernet Routing Switch 4500 Series) does not exceed the Class
A limits for radio-noise emissions from digital apparatus as set out in the Radio Interference
Regulations of the Canadian Department of Communications.
Règlement sur le brouillage radioélectrique du ministère des
Communications
Cet appareil numérique (Avaya Ethernet Routing Switch 4500 Series) respecte les limites de
bruits radioélectriques visant les appareils numériques de classe A prescrites dans le
Règlement sur le brouillage radioélectrique du ministère des Communications du Canada.
CE marking statement (Europe only)
EN 55022 statement
This is to certify that the Avaya Ethernet Routing Switch 4500 Series equipment is shielded
against the generation of radio interference in accordance with the application of Council
Directive 89/336/EEC. Conformity is declared by the application of EN 55022 Class A (CISPR
22).
EN 55024 statement
This is to certify that the Avaya Ethernet Routing Switch 4500 Series are shielded against the
susceptibility to radio interference in accordance with the application of Council Directive
89/336/EEC. Conformity is declared by the application of EN 55024 (CISPR 24).
6 Installation November 2010
European Union and European Free Trade Association (EFTA) notice
EN 300386 statement
The Avaya Ethernet Routing Switch 4500 Series complies with the requirements of EN 300386
V1.3.1 for emissions and for immunity for a Class A device intended for use in either
Telecommunications centre or locations other than telecommunications centres given the
performance criteria as specified by the manufacturer.
European Union and European Free Trade Association
(EFTA) notice
All products labeled with the CE marking comply with R&TTE Directive (1995/5/
EEC) which includes the Electromagnetic Compliance (EMC) Directive (89/336/
EEC) and the Low Voltage Directive (73/336/EEC) issued by the Commission of
the European Community.
Compliance with these directives implies conformity to the following European Norms (ENs).
The equivalent international standards are listed in parenthesis.
• EN 55022 (CISPR 22)–Electromagnetic Interference
• EN 55024 (IEC 61000-4-2, -3, -4, -5, -6, -8, -11)–Electromagnetic Immunity
• EN 61000-3-2 (IEC 610000-3-2)–Power Line Harmonics
• EN 61000-3-3 (IEC 610000-3-3)–Power Line Flicker
VCCI statement (Japan/Nippon only)
This is a Class A product based on the standard of the Voluntary Control Council for
Interference (VCCI) for information technology equipment. If this equipment is used in a
domestic environment, radio disturbance may arise. When such trouble occurs, the user may
be required to take corrective actions.
Installation November 2010 7
Avaya Ethernet Routing Switch 4500 regulatory information and safety precautions
BSMI statement (Taiwan only)
This is a Class A product based on the standard of the Bureau of Standards, Metrology and
Inspection (BSMI) CNS 13438 and CNS14336 , Class A.
MIC notice (Republic of Korea only)
This device has been approved for use in Business applications only per the Class A
requirements of the Republic of Korea Ministry of Information and Communications (MIC). This
device may not be sold for use in a non-business application.
Observe the Regulatory Marking label on the back or bottom of each switch for specific
certification information pertaining to this model. Each Avaya Ethernet Routing Switch 4500
Series model is approved for shipment to/usage in Korea and is labeled as such, with all
appropriate text and the appropriate MIC reference number.
National Safety Statements of Compliance
EN 60950 statement
This is to certify that the Avaya Ethernet Routing Switch 4500 Series equipment is in
compliance with the requirements of EN 60950 in accordance with the Low Voltage Directive.
Additional national differences for all European Union countries have been evaluated for
compliance.
NOM statement (Mexico only)
The following information is provided on the devices described in this document in compliance
with the safety requirements of the Norma Oficial Méxicana (NOM):
8 Installation November 2010
Información NOM (unicamente para México)
Exporter: Avaya Inc.
4655 Great America Parkway
Santa Clara CA 95054 USA
Importer: Avaya Communication de México, S.A. de C.V.
Av. Presidente Masarik 111
Piso 6
Col Chapultepec Morales
Deleg. Miguel HIdalgo
México D.F. 11570
Input: Avaya Ethernet Routing Switch 4500 Series:
• 4548GT-PWR 100-240 VAC 6.5A MAX 50-60 Hz
• 4550T-PWR 100-240 VAC 6.5A MAX 50-60 Hz
• 4548GT 100-240 VAC 3A MAX 50-60 Hz
• 4550T 100-240 VAC 3A MAX 50-60 Hz
• 4526FX 100-240 VAC 3A MAX 50-60 Hz
• 4526T 100-240 VAC 3A MAX 50-60 Hz
• 4526T-PWR 100-240 VAC 6.5A MAX 50-60 Hz
• 4526GTX 100-240 VAC 3A MAX 50-60 Hz
• 4526GTX-PWR 100-240 VAC 6.5A MAX 50-60 Hz
• 4524GT 100-240 VAC 3 A MAX 50-60 Hz
• 4524GT-PWR 100-240 VAC 3 A MAX 50-60 Hz
Información NOM (unicamente para México)
La información siguiente se proporciona en el dispositivo o en los dispositivos descritos en
este documento, en cumplimiento con los requisitos de la Norma Oficial Méxicana (NOM):
Exportador: Avaya Inc.
4655 Great America Parkway
Santa Clara, CA 95054 USA
Importador: Avaya Communication de México, S.A. de C.V.
Av. Presidente Masarik 111
Piso 6
Col Chapultepec Morales
Deleg. Miguel HIdalgo
México D.F. 11570
Embarcar a: Avaya Ethernet Routing Switch 4500 Series
Installation November 2010 9
Avaya Ethernet Routing Switch 4500 regulatory information and safety precautions
• 4548GT-PWR 100-240 VAC 6,5A 50-60 Hz
• 4550T-PWR 100-240 VAC 6,5A 50-60 Hz
• 4548GT 100-240 VAC 3A 50-60 Hz
• 4550T 100-240 VAC 3A 50-60 Hz
• 4526FX 100-240 VAC 3A 50-60 Hz
• 4526T 100-240 VAC 3A MAX 50-60 Hz
• 4526T-PWR 100-240 VAC 6.5A MAX 50-60 Hz
• 4526GTX 100-240 VAC 3A MAX 50-60 Hz
• 4526GTX-PWR 100-240 VAC 6.5A MAX 50-60 Hz
• 4524GT 100-240 VAC 3 A MAX 50-60 Hz
• 4524GT-PWR 100-240 VAC 3 A MAX 50-60 Hz
Denan statement (Japan/Nippon only)
National Environmental Statements of Compliance
The WEEE Directive 2002/96/EC and RoHS (Restriction of Hazardous Substances) Directive
2002/95/EC sets collection, recycling and recovery targets for various categories of electrical
products and their waste.
Restriction on Hazardous Substances Directive Compliance Statement
The Restriction on Hazardous Substances Directive (RoHS) (2002/95/EC), which
accompanies the WEEE Directive, bans the use of heavy metals and brominated flameretardants in the manufacture of electrical and electronic equipment. Specifically, restricted
10 Installation November 2010
materials under the RoHS Directive are Lead (including solder used in PCB’s), Cadmium,
Mercury, Hexavalent Chromium, and Bromine.
Avaya declares compliance with the European Union (EU) RoHS Directive (2002/95/EC).
WEEE Directive Compliance Statement
This product at end of life is subject to separate collection and treatment
in the EU Member States, Norway, and Switzerland and therefore is
marked with the symbol shown at the left. Treatment applied at end of
life of these products in these countries shall comply with the applicable
national laws implementing Directive 2002/96/EC on Waste of Electrical
and Electronic Equipment (WEEE).
Avaya declares compliance with the European Union (EU) WEEE
Directive (2002/96/EC).
WEEE Directive Compliance Statement
Installation November 2010 11
Avaya Ethernet Routing Switch 4500 regulatory information and safety precautions
12 Installation November 2010
Chapter 2: New in this release
The following sections detail what’s new in Avaya Ethernet Routing Switch 4500 Series—Installation
Guide (NN47205-300) for release 5.3.
Features
See the following sections for information about feature changes:
•
Avaya Ethernet Routing Switch 4524GT-PWR on page 13
• This release supports 1000BASE-BX bi-directional SFPs on the 4524GT(PWR) model
(see Installing SFP and XFP Tranceivers and GBICs NN47205–301 for information about
XFP choice).
Avaya Ethernet Routing Switch 4524GT-PWR
The 4524GT-PWR is a new additional hardware model added to the 4500 series Avaya
Ethernet Routing Switches. See the following sections for more information:
Table 4: 4524GT, 4526GTX and 4548GT RJ-45 connector pin assignments on page
•
27
• Table 5: 4524GT-PWR, 4526GTX-PWR and 4548GT-PWR RJ-45 connector pin
assignments on page 28
Figure 12: Avaya Ethernet Routing Switch 4524GT-PWR on page 41
•
Installation November 2010 13
New in this release
14 Installation November 2010
Chapter 3: Introduction
This guide provides information and instructions to install a 4500 Series Avaya Ethernet Routing Switch.
For information about configuration and management of the switch, see the documentation included with
the switch and the product release notes.
You need a #2 Phillips screwdriver, an AC power cord that meets the requirements of the appropriate,
local electrical codes (see
cable and connector to match the male DTE connector (DB-9) on the switch to successfully accomplish
the installation procedures in this document:
Avaya Ethernet Routing Switch 4500 Series
The following table describes the 4500 Series of Avaya Ethernet Routing Switches.
Table 1: 4500 Series Switch Platforms
4500 Series Switch Model Key Features
Table 13: International power cord specifications on page 35), and a console
Avaya Ethernet Routing Switch
4526FX
Avaya Ethernet Routing Switch
4526T
Avaya Ethernet Routing Switch
4526T–PWR
Avaya Ethernet Routing Switch
4550T
Avaya Ethernet Routing Switch
4550T–PWR
Avaya Ethernet Routing Switch
4524GT
24 100BaseFX ports (MTRJ connector) plus 2
10/100/1000 SFP combo ports
Redundant power slot for DC/DC converter installation.
24 10/100BaseTX RJ-45 ports plus 2 10/100/1000/
SFP combo ports
Redundant power slot for DC/DC converter installation.
24 10/100BaseTX RJ-45 ports with PoE plus 2
10/100/1000/SFP combo ports
Integrated redundant power connector for RPS 15 cable
Connection.
48 10/100BaseTX RJ-45 ports plus 2 10/100/1000 SFP
combo ports
Redundant power slot for DC/DC converter installation.
48 10/100BaseTX RJ-45 ports with PoE plus 2
10/100/1000 SFP combo ports
Integrated redundant power connector for RPS15 cable
connection.
24 10/100/1000Base TX RJ-45 ports and 4 shared SFP
ports
Redundant power slot for DC/DC converter installation.
Installation November 2010 15
Introduction
4500 Series Switch Model Key Features
Avaya Ethernet Routing Switch
4524GT-PWR
Avaya Ethernet Routing Switch
4526GTX
Avaya Ethernet Routing Switch
4526GTX–PWR
Avaya Ethernet Routing Switch
4548GT
Avaya Ethernet Routing Switch
4548GT–PWR
24 10/100/1000BaseTX RJ-45 ports with PoE and 4
shared SFP ports
Integrated redundant power connector for RPS 15 cable
connection.
24 10/100/1000BaseTX RJ-45 ports and 4 shared SFP
ports plus 2 10GE XFP slots
Redundant power slot for DC/DC converter installation.
24 10/100/1000BaseTX RJ-45 ports with PoE and 4
shared SFP ports plus 2 10GE XFP slots
Integrated redundant power connector for RPS 15 cable
Connection.
48 10/100/1000BaseTX RJ-45 ports and 4 shared SFP
ports
Redundant power slot for DC/DC converter installation.
48 10/100/1000BaseTX RJ-45 with PoE and 4 shared
SFP ports
Integrated redundant power connector for RPS15 cable
connection.
Navigation
•
Installing the Avaya Ethernet Routing Switch on page 17
• Translations of safety messages on page 63
16 Installation November 2010
Chapter 4: Installing the Avaya Ethernet
Routing Switch
This section provides the information and procedures to install the Avaya Ethernet Routing Switch 4500
Series. Unless otherwise noted, tasks in this section apply to all switches in this series.
Navigation:
•
Electrostatic discharge on page 17
• Environmental requirements on page 19
• Package contents on page 20
• Installing the Avaya Ethernet Routing Switch 4500 Series on a table or shelf on page 21
• Installing the Avaya Ethernet Routing Switch 4500 Series in an equipment rack on page 22
• Cable requirements for the Avaya Ethernet Routing Switch 4500 Series on page 24
• Installation and removal of Small Form-factor Pluggable (SFP) transceivers on page 25
• RJ-45 connector pin assignments on page 27
• Console port pin assignments on page 31
Universal Serial Bus (USB) ports on page 31
•
• Power specifications for the Avaya Ethernet Routing Switch 4500 Series on page 32
• Connect AC power on page 35
Check Light Emitting Diode (LED) on the Avaya Ethernet Routing Switch 4500 Series on page
•
37
• Set IP parameters for the Avaya Ethernet Routing Switch 4500 Series on page 45
• Avaya Ethernet Routing Switch 4500 series stacking on page 53
• Stack configurations on page 59
Electrostatic discharge
This section provides information and procedures to prevent electrostatic discharge during
installation.
Preventing electrostatic discharge damage
Electrostatic discharge (ESD) is a discharge of stored static electricity that can damage
equipment and impair electrical circuitry. Electrostatic voltages can result from friction
Installation November 2010 17
Installing the Avaya Ethernet Routing Switch
including, pulling cabling through conduits, walking across carpeted areas, and building static
charge in clothing. When you improperly handle electronic components, ESD damage occurs
and can result in complete or intermittent failures. While networking equipment is commonly
designed and tested to withstand common mode ESD events, voltage can sometimes
discharge to some connector pins, which can potentially damage the networking equipment.
Caution:
To protect the Avaya Ethernet Routing Switch against ESD damage, take the following
measures before you connect data cables to the device:
• Always use antistatic wrist straps. Make sure you adjust the strap to provide good skin
contact.
• Ensure that you properly ground work surfaces and equipment racks for protection
against electrostatic discharge. You must connect the common point to the building
ground wire. In a properly wired building, the nearest reliable ground is typically at the
electrical outlet.
• Avoid contact between equipment and clothing. The wrist or ankle strap protects only
the equipment from ESD voltages on the body; ESD voltages on clothing can still cause
damage.
• Avoid touching any connector pins.
• Do not remove the wrist or ankle strap until the installation is complete.
Preventing electrostatic damage in new cable installations
With new cable installations, Avaya recommends that you use an ESD discharge cable to
reduce the potential for damage from static, that can build up in cables. The following figure
illustrates an ESD cable.
Figure 1: Job aid
To install the ESD discharge cable, perform this procedure.
18 Installation November 2010
1. Connect the ground lug on the ESD discharge cable to a safe and suitable earth
ground.
2. Connect all RJ-45 cable connectors to the female RJ-45 connector of the ESD
discharge cable for at least 5 seconds, and then connect each RJ-45 cable
connector to the switch.
3. Leave cables connected to the networking equipment. After you connect cables to
networking equipment, the cables do not build up charge.
Environmental requirements
The following table provides the environmental requirements for the individual switches in this
series. Ensure that the area where you install the switch and where it operates meets these
requirements.
Table 2: Avaya Ethernet Routing Switch 4500 Series environmental requirements
Environmental requirements
Environmental
requirement
Ambient Temperature 0C to 50C, continuous operation
Operating Temperature 0C to 50C
Storage Temperature –40C to 85C
Operating Humidity 0 to 95 percent noncondensing
Operating Relative
Humidity
Storage Relative Humidity 10 to 90 percent noncondensing
Maximum Operating
Altitude
Altitude 0 to 10 000 feet above sea level
Storage Altitude –1 000 to 40 000 feet above sea level
Acoustic Noise Less than or equal to 45 db at 35C and less than or equal to
Miscellaneous Operating
Considerations
Avaya Ethernet Routing Switch 4500 Series models
10 to 90 percent noncondensing
10 000 feet above sea level
57 db at 50C. The temperature is allowed to have ±3.5C
deviation around the threshold of 35C, (measurement
methods based on ISO 7779).
• No heat sources such as hot air vents or direct sunlight near
the switch.
• No sources of severe electromagnetic interference near the
switch.
• No excessive dust in the environment.
Installation November 2010 19
Installing the Avaya Ethernet Routing Switch
Environmental
requirement
Warning:
To avoid bodily injury from hazardous electrical shock and current, never remove the top of
the device. No user-serviceable components are inside. For a translation of this statement,
see Translations of safety messages on page 63.
Package contents
Figure 2: Avaya Ethernet Routing Switch 4500 Series package contents on page 20
illustrates the components that are provided with each switch in the 4500 Series. If any
components are missing, contact the switch vendor.
Avaya Ethernet Routing Switch 4500 Series models
• An adequate power source is within 6 feet (1.83 meters) of
the switch. One 15-amp circuit is required for each power
supply.
• At least 2 inches (5.08 centimeters) of clearance on each
side of the switch unit for ventilation.
• Adequate clearance at the front and rear of the switch for
access to cables.
Figure 2: Avaya Ethernet Routing Switch 4500 Series package contents
1. Avaya Ethernet Routing Switch 4500 Series
2. Rack-mounting hardware that includes:
• Rack-mount brackets
20 Installation November 2010
Loading...