Avaya CM089-ST User Manual

CM089-ST | 7 " Swivel Tightening Windshield Suction Pedestal

CM089-ST

Windshield Installation

Step 1.

Push the pedestal suction cup (A) firmly to the windshield.
Flip the lever (B) down to secure the suction cup.

(A)

(B)

Pedestal Adjustment and Cradle Attachment
(Cradle Sold Separately)

Step 1.

Adjust the angle of the pedestal head by using both hands to
bend the gooseneck (D).

Step 2.

Adjust the angle and rotation of the pedestal head by loosening
the swivel tightening ring (E).

(B)

(C)

Dash Installation (Optional,
when disc is included)

Step 1.

Locate a safe flat surface on
the dash or console to
mount the pedestal. Clean

(A)

the dash with the alcohol
pad provided. Let the dash
surface dry before applying
the adhesive disc (C).

Push the pedestal suction

Step 2.

cup (A) firmly to the disc (C).
Flip the lever (B) down to
secure the suction cup.

Step 3.

Attach the device cradle to the pedestal head by inserting the T­tab (F) into the T-slot (G). (Cradle Sold Separately)

(F)

(D)

(E)

Safety Precautions

Do not install Arkon products over an air bag cover or within the air
bag deployment zone. Arkon Resources, Inc. assumes no responsi­bility of liability for injury or death as a result of car crashes and/or
air bag deployment.

Arkon Resources, Inc. is not responsible for any damages caused to
your car, your device, or yourself due to the installation or use of the
pedestal mount.

(G)

Consumer Hotline:
(USA) [phone]
(INT'L) [phone]
Mon-Fri. 9am-5pm, PST

The Mobile Mounting Specialists

Arcadia, CA 91006 USA

© Copyright 2007 Arkon Resources, Inc.

TM

www.arkon.com

Made in Taiwan