Avaya CALLMASTER VI User Manual
CALLMASTER®VI Voice Terminal
Version 1.0
Installation and User’s Manual
Caution: Please DO NOT DISCARD
this booklet. It contains important
safety information necessary for
anyone responsible for installing
or using these terminals.
555-015-162
Comcode 107969602
Issue 1
June, 1997
WARRANTY
All terms and conditions specified in the owner’s agreement with Avaya apply.
NOTICE
While reasonable efforts were made to ensure that the information in this
document was complete and accurate at the time of printing, Lucent
Technologies can assume no responsibility for any errors. Changes or
corrections to the i nformation cont ained in this doc ument may be incorporated
into future issues.
DISCLAIMER
Intellectual property related to this product (including trademarks) and registered to AT&T
Corporati on has been transferr ed to Lucent Technologies Incorporated.
Any references within this text to American T elephone and Telegraph Corporation or AT&T should be
interpreted as references to Lucent Technologies Incorporated. The exception is cross-references to
books published prior to December 31, 1996, which retain their original AT&T titles.
Intellectual property related to this product (including trademarks) and registered
to Lucent Technologies Inc. has been transferred or licensed to Avaya Inc.
Any reference within the text to Lucent Technologies Inc. or Lucent should be
interpreted as references to Avaya Inc. The exception is cross references to
books published prior to April 1, 2001, which may retain their original Lucent
titles.
Avaya Inc. formed as a result of Lucent’s planned restructuring, designs builds
and delivers voice, converged voice and data, customer relationship management, messaging, multi-service networking and structured cabling products and
services. Avaya Labs is the research and development arm for the company.
THE “CE” MARK
The “CE” mark affixed to this equipment means that it conforms to the
European Union Electromagnetic Compatibility Directive (89/336/EEC) and
the Low Voltage Directive (73/23/EEC).
HEARING AID COMPATIBILITY
These voice terminals are Hearing-Aid Compatible (“HAC”) when used w ith
HAC headsets.
TRADEMARKS
CALLMASTER and DEFINITY are registered trademarks of Lucent
Technologies.
STARSET, SUPRA, and MIRAGE are registered trademarks of Plantronics,
Inc.
TRISTAR and ENCORE are trademarks of Plantronics, Inc.
Deve loped by
Lucent Technologies Network Systems Customer Training and Information
Products
©1997 Avaya Inc.
All Rights Reserved
Printed in USA
Printed in USA
INTERFERENCE WARNING INFORMATION
WARNING:
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules and
CISPR-22. These limits are designed to provide reasonable protection against
harmful interference in an installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio and
television communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
●
Reorient or relocate the receiving antennae.
●
Increase the separation between the equipment and receiver.
●
Plug the equipment into an outlet on a circuit different from that to which
the receiver is connected.
●
Consult the dealer or an experienced radio/tv technician for help.
ENVIRONMENTAL INFORMATION
In accordance with international environmental standards, parts of this Lucent
Technologies voice terminal have been manufactured with recyclable plastic
resins. These telephone parts have been marked
>ABS<
so they can be
easily identified at recycling or waste recovery facilities when appropriate. The
paper used in this documentation is also recyclable.
IMPORTANT USER SAFETY
INSTRUCTIONS
Careful attention has been devoted to quality standards in the
manufacture of your new voice terminal. Safety is a major factor in the
design of every set. But, safety is YOUR responsibility, also.
Please read the following helpful tips. These suggestions will
enable you to take full advantage of your new voice terminal.
Then, retain these tips for later use.
CAUTION: This voice terminal is NOT for residential use. It is
for business systems applications ONLY. Use in a residential
environment could result in an electrical short circuit when
the telephone wiring is set up to provide other applications,
for example, for appliance control or power transformers. The
AC power used in these applications may create a safety
hazard by placing a direct short circuit across the telephone
wiring.
USE
When using your telephone equipment, the following safety
precautions should always be followed to reduce the risk of fire,
electric shock, and injury to persons.
●
Read and understand all instructions.
●
Follow all warnings and instructions marked on the telephone.
This telephone can be hazardous if immersed in water. To avoid
●
the possibility of electric shock, do not use it while you are wet. If
you accidentally drop the telephone into water, do not retrieve it
until you have first unplugged the line cord from the modular jack
and the EIA/TIA cable from your personal computer. Then, call
service personnel to ask about a replacement.
●
Avoid using the telephone during electrical storms in your
immediate area. There is a risk of electric shock from lightning.
Urgent calls should be brief. Even though protective measures
may have been installed to limit electrical surges from entering
your business, absolute protection from lightning is impossible.
●
If you suspect a natural gas leak, report it immediately, but use a
telephone away from the area in question. The telephone’s
electrical contacts could generate a tiny spark. While unlikely, it is
possible that this spark could ignite heavy concentrations of gas.
●
Never push objects of any kind into the equipment through
housing slots since they may touch hazardous voltage points or
short out parts that could result in a risk of electric shock. Never
spill liquid of any kind on the telephone. If liquid is spilled, however,
refer servicing to proper service personnel.
To reduce the risk of electric shock, do not disassemble this
●
telephone. There are no user serviceable parts. Opening or
removing covers may expose you to hazardous voltages. Incorrect
reassembly can cause electric shock when the telephone is
subsequently used.
SERVICE
1.
Before cleaning, unplug the telephone from the modular wall jack
and your personal computer. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
Unplug the telephone from the modular wall jack. Be sure to refer
2.
servicing to qualified service personnel when these conditions
exist:
●
If liquid has been spilled into the telephone
●
If the telephone has been exposed to rain or water
●
If the telephone has been dropped or the housing has been
damaged
●
If you note a distinct change in the performance of the
telephone.
SAVE THESE INSTRUCTIONS
When you see this warning symbol on the product, refer
to the instructions booklet (packed with the product) for
more information before proceeding.
IMPORTANT SAFETY WARNINGS
FOR INSTALLATION
When this product is located in a separate building from the telephone
communications system, a line current protector MUST be installed at
the entry/exit points of ALL buildings through which the line passes.
Only one protector is needed at each installation point.
For 2-wire installations, the following is recommended:
●
Lucent Technologies 4-type protectors
●
ITW LINX LP-type protectors.
Lucent Technologies 3BIC (carbon block) or Lucent 3BEW (gas tube)
protectors are also acceptable in a 2-wire installation.
INSTALLATION WARNING
(for the CALLMASTER VI)
MODULAR WALL JACK WIRING
Pin
4 1
5
Pair
1 W-BL
Name
BL-W
Description
2-Wire (Tip)
2-Wire (Ring)
FAILURE TO FOLLOW THESE INSTRUCTIONS CAN CAUSE DAMAGE TO
THE TERMINAL OR CAUSE THE ASSOCIATED DEFINITY
®
ECS CIRCUIT
PACK TO REMOVE POWER TO THE TERMINAL. IN EITHER CASE, THE
TERMINAL WILL NOT FUNCTION CORRECTLY.
For 2-wire operation, if you need to plug the voice terminal into a 4-pin
or 6-pin wall jack, instead of a standard 8-pin modular jack, see the
Modular Wall Jack Wiring table to ensure that the wires from the 4-pin or 6-pin
wall jack are connected to the correct pins on the terminal LINE jack.
Two-wire installations must have only PBX connections on pair 1.
This information applies to the CALLMASTER® VI.
Loading...