Avaya Business Communications Manager 3.7 User Manual
Business Communications Manager 3.7 Documentation Update
Welcome to Business Communications Manager 3.7, the unified communications solution
that gives you an edge on your competition.
The Business Communications Manager 3.7 documentation is on the Business
Communications Manager 3.7 Documentation CD-ROM. This CD-ROM is in your Business
Communications Manager 3.7 kit.
To view the documentation:
1 Insert the Business Communications Manager 3.7 Documentation CD-ROM into the
CD-ROM drive of your computer.
2 Double-click the My Computer icon.
3 Double-click the CD-ROM icon.
4 Double-click Start.pdf.
This document provides last-minute changes to the Business Communications Manager 3.7
documentation.
BCM200/400 Installation and Maintenance Guide
Page 87, Analog media bay modules
The GASM8 is designated as an ONS (on-premise station) port.
Page 87, Analog media bay modules
The information on regional availability is modified:
The ASM8 is available in North America only; the ASM8+ and GASM8 are available in
North America, the United Kingdom, Australia, and Poland.
Page 95, 7406 digital phone system components
The second bullet, "Portable handsets: based on T316 functionality, including six line
buttons and a two-line display,"
should be, "Portable handsets: based on T7316 functionality, including six line buttons and a
two-line display."
Business Communications Manager
2
Page 164, Connect the media bay modules to service providers
In Figure 80, the pinout diagram is changed.
Figure 80 BRIM S/T RJ45 wiring array
BRIM S/T connector
Pin #/connection System side
1 not used
2 not used
3 +Rx
4 +Tx
5 -Tx
6 -Rx
7 not used
8 not used
1 2 3 4 5 6 7 8
8 7 6 5 4 3 2 1
RJ45 jacks
+Tx
+Rx
-Rx
-Tx
Page 327, Analog media bay modules
The sentence, "The ATA2 provides on-premise service only (unexposed plant only),"
should be, "The ATA2 is designated as either an ONS (on-premise station) or an OPS (off-premise station) port."
Page 329, Connecting an analog telephone
In Figure 183, the label "BCM1000" is changed to "BCM200/400".
Figure 183 Analog telephone installation overview
ATA 2 power cord
BCM200/400
Central
Office
ATA 2
Line loop resistance:
135 ohms maximum
Analog telephone
Terminal loop resistance:
1300 ohms maximum
Loading...