Avaya BSG12aw Quick Installation Guide

BSG12aw ADSL WAN Module

BSG12

Replacement Guide

You can download all documents referenced in this Quick Install Guide at www.nortel.com.

Tools and materials

Risk of equipment damage

The ADSL WAN replacement module must be contained in an an antistatic bag at all times. Before you remove the ADSL WAN replacement module from the bag, you must wear an antistatic grounding strap that is attached to a grounding source.

Before you replace the BSG12aw ADSL WAN module, open the box for the BSG12aw ADSL WAN module

and ensure you have the following package contents.

Package Contents

● BSG12aw ADSL WAN Replacement Module (NT5S21ZCE6)

Tools

You require the following tools to complete this replacement procedure:

Use a Phillips screwdriver to remove the screws on either side of the ADSL WAN module. You will feel the screws disengage when you have sufficiently loosened them.

Gently remove the ADSL WAN module from the faceplate.

1 2 3 4 5 6 7 8 9 10 11 12

1 3 5 7 9 11

PoE

2 4 6 8 10 12

PoE

Slide the BSG12aw ADSL WAN Replacement Module (NT5S21ZCE6) into the ADSL WAN module slot.

BSG12aw

BSG12 ADSL

IOIOI

● Phillips screwdriver

● antistatic grounding strap

● grounding source

Replacing the ADSL WAN module

Risk of equipment damage

You must wear an antistatic grounding strap at all times when handling electronic components. The antistatic grounding strap must be connected to a grounding source. Failure to do so can result in damage to the equipment.

Power down the BSG12aw unit.

ADSL WAN LED

1 2 3 4 5 6 7 8 9 10 11 12

1 3 5 7 9 11

PoE

BSG12aw

BSG12 ADSL

6 7 8

1 2 3 4 5 6 7 8 9 10 11 12

1 3 5 7 9 11

PoE

2 4 6 8 10 12

PoE

Use a Phillips screwdriver to retighten the screws on either side of the ADSL WAN module. Do not overtighten the screws.

Power up the BSG12aw unit.

Verifty that the ADSL WAN module status LED becomes solid green.

BSG12aw

IOIOI

BSG12 ADSL

2 4 6 8 10 12

PoE

IOIOI

ADSL WAN module

For more information on the BSG12aw hardware, refer to Installation (NN47928-500).