Avaya 9601 User Manual

IMPORTANT SAFETY GUIDELINES

FOR USERS

ELECTROMAGNETIC COMPATIBILITY

For safe and efficient operation of your DEFINITY Wireless Business System WT, observe these guidelines.

Your WT is a radio transmitter and receiver. When the battery is install ed, th e WT is on an d it r ec eives and also sends out radio frequency (RF) energy. The WT operates in the frequency range of 19201930 MHz. Your handheld WT uses the digital TDMA mode; the power is transmitted in bursts at a 100 Hz pulsed repetition rate. The peak envelope transmit power is 100 mW or less.

Exposure to Radio Frequency Energy

The design of your WT complies with the latest safety levels from the Institute of Electrical and Electronic Engineers (IEEE) and the American Standards Institute (ANSI) with respect to human exposure to RF energy. Of course, if you would like to limit RF exposure even further, you may choose to control the duration of your calls.

Cardiac Pacemakers

The Health Industry Manufacturers Association recommends that a minimum separation distance of six inches be maintained between a han dheld WT and a pacemaker to avoid potential interference with a pacemaker.

WARNING

These recomm endations are con sis te n t wit h the independent research by and recommendations of wireless technology research.

• Always keep the WT more than six inches

from the pacemaker whenever the battery is in the WT .

• Do not carry the WT in a breast pocket.

• Use the ear opposite the pacemaker to

minimize the potential for interference.

If you have any reason to suspect that interference is taking place, take th e battery out of your WT immediately.

Hearing Aid Compatibility

Most electronic equipment, such as equipment in hospitals, is shielded fr om RF en ergy. However, RF energy from WTs may affect some electronic equipment.

Although the DEFINITY Wireless Business System WT is compatible with inductivel y coupled hearing aids, you should consult your physician o r hearin g aid manufacturer to determine if your hearing aid is adequately shielded from external RF energy. The operation of inadequately shielded medical devices may be adversely affected when a portable WT is operating in close proximity.

Prepared by BCS Product Documentation Development Lucent Technologies Middletown, N J 07748-9972

555-232-104 Comcode 108478413 Issue 4 May 1999

DEFINITY® Wireless Business System 9601 Wireless Terminal (WT)

Quick Reference

Battery Release

Press to display soft keys for

Conf (Conference) Trans (Transfer) Drop (Drop)

(See

HOW TO

)

Ringer/Volume Control

Press to adjust volume or ringer

Hard Keys for Menu Control

Buttons with labels and functions that do not change

■ Menu

Press to access soft keys

■ Prev (Previo us)

Press to access previous menu items and calling screens

■ Next

Press to access next menu items and calling screens

Flap

Conf Trans Drop

1 456 7

User Name

Names Numbers 1 2 3 4 5

NextPrev

ABC

DEF

JKL MNOGHI

TUV WXYZPQRS

8 0 #

HoldEndCall

WT 9601

WT Display

3-line display shows status of WT

Soft Keys

Preprogrammed buttons with labels and function s that can change.

(Press to access call features.)

Dial Pad

Standard 12 buttons for dialing phone numbers/ accessing DEFINITY ECS call features

Hard Keys for Call Management

■ Call

Press to make

and answer calls

■ End

Press to end calls or clear misdialed digits

■ Hold

Press to place calls on hold

Open Position

5 1

Operating the DEFINITY Wireless

Business System 9601 Wireless Terminal

HOW TO:

• Adjust Ringer and W a rning/Notification Tones

— When you are not on a call, press and

hold (higher or lower).

• Adjust Receiver Volume

— Press . — Press (higher or lower) to

Call

adjust volume of earpiece.

• Make a Call

— Dial the telephone number of the party. — Press .

Call

• Answer a Call

— Press when the handset rings.

Call

• Clear Misdialed Digits

— Press .

End

• Conference a Call

— Advise the active party t hat you ar e initi ating

a conference.

— Press to display the

Conf soft key

(if not already displayed).

— Press the

Conf soft key.

— Dial the telephone number of the next party. — Press the

Conf soft key to conference the two

calls together on one call appearance. (The screen displays “CONFERENCE.”)

• Drop a Call

— Press to display the Drop soft key

— Press the

(if not already displayed).

Drop soft key.

• End a Call

— Press .

End

• Hold a Call

— Press . — Press the soft key below the flashing

Hold

indicator to return to the call.

• Transfer a Call

— Advise the caller that you are

transferring the call.

2 43

— Press to display the

Trans soft key

(if not already displayed).

— Press the associated

Trans soft key.

— Dial the transfer number. — Press the

Trans soft ke y to complete the

transfer process.

• Mute the WT

— From the calling screen, press

either once or twice.

— Press the

Mute soft key.

• Unmute the WT

— Ensure that “Mute” is flashing. — Press the

Mute soft key.

• Activate/Deactivate Silent Mode

— Press . — Press . — Press the — Press the Yes soft key.

Silent soft key.

• Create an Initial Lock Password

— Press . — Press the — Press the — Enter a 4-character password

— Reenter the password for verification.

Lock soft key. Yes soft key.

(choosing from 0 through 9).

End

Press to clear misdialed digits.

• Lock the WT

— Press (unless you are already

— Press the — Enter the correct password. Press to

on the “lock” screen).

Lock soft key.

End

clear misdialed digits.

• Change the Lock Passwo rd

— Press . — Press the — Press the — Enter the old password. Press to clear

— Enter the new passwor d. Pres s to clear

— Reenter the password for verification.

Lock soft key. Change soft key.

End

misdialed digits.

End

misdialed digits.

• Delete a Lock Password

— Press . — Press the — Press the — Enter the old password. Press to

Lock soft key. Del(ete) soft key.

End

clear misdialed digits.

• Unlock the WT

— Press . — Enter the correct password. Press to

clear misdialed digits.

Battery Charger

WT LED Indicator

Battery LED Indicator

Cradle

LED Indicators Charge Status

Yellow Rapid Charge Green Slow Charge

Blinking Green

Red

Evaluation and Standby Mode

Battery Fault (Reseat batte ry.)

End

Spare Battery Pack