Avanity AUSTENVS49TGSC, AUSTENVS61TGGWQ, AUSTENVS61TGSC, ALLIEVS31TGSC, ALLIEVS25TGGC Installation Manual

SUGGESTED TOOLS AND MATERIALS

Philips Screwdriver Sealant Tape Measure Safety Glasses

PARTS / HARDWARE (INCLUDED ONLY WITH AVANITY STONE TOPS)

INSTALLATION INSTRUCTION

STONE VANITY TOP

All Sizes

10'

500001

SINK INSTALLATION

1

Apply a continuous bead of quality sealant
to the top surface (rim) of the sink.

4x

120003

4x

120004

111212

4x

4x

2

Turn the stone top upside down and place it on a clean,
scratch resistant surface. Center the sink over the cutout.

3

Secure the sink to the top using the mounting kit / hardware provided with the stone top, HAND TIGHTEN ONLY.

4

6

5

Apply bead of quality sealant evenly
along the top of the vanity.

Finally, place the bottom side of back splash with sealant onto the countertop and check
alignment of backsplash. Adjust the leg levelers as needed

Apply silicone sealant evenly along
the bottom of backsplash and wall.

**NOTE: Sink style, shape, cutout on top, vanity may vary from the picture above. Instructional purposes only. **

SUGGESTED TOOLS AND MATERIALS / OUTILS ET MATÉRIAUX PROPOSÉES

Vanity Installation

10'

Tape Measure / Mètre à ruban

INSTALLATION INSTRUCTIONS / Les instructions d'installation

1 2

Remove vanity from box and examine vanity
for any defects or damage.

Carefully place vanity against wall.

3

Install vanity top according to manufacturer’s directions.

For customer support, please call Avanity Corporation at 866-522-5578 weekdays 9:00 to 6:00 PST