Autostart AS-1727 User Manual

AUTOMATIC TRANSMISSION REMOTE STARTER
AS-1727
User Guide
Table of Contents
Table of Contents ...................................1
Introduction............................................. 2
Using the Remote Control ......................2
Multi-Level Features (default state)....... 3
Remote-Starting Your Vehicle ................ 4
Vehicle Presets....................................... 4
Driving Off............................................... 4
Using the Remote Starter ....................... 4
Arming the Starter Kill............................. 4
Idle Mode................................................ 5
Turbo Mode ............................................5
Valet Mode.............................................. 5
Valet Mode Using the Valet Switch (if
Ignition Valet........................................... 5
Remote Valet Mode................................ 6
Panic Mode............................................. 6
Quick LockoutTM...................................... 6
Cold Weather Mode................................ 6
INDUSTRY CANADA USER NOTICE:
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (EIRP) is not more than that required for successful communication".
FCC USER NOTICE (U.S.A.): This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment.
Advanced Features: Installation-
programmable Options ........................... 7
Remote Door Locks................................ 7
Priority Door Access ............................... 7
Active or Passive Arming........................ 7
The Starter Kill and the Anti-grind Feature
................................................................ 7
Flashing LED .......................................... 8
Safe Start................................................ 8
Ignition-Controlled Door Locks ...............8
Ignition Re-lock....................................... 8
Secure Lock............................................ 8
Turbo Mode ............................................8
Remote Trunk Release........................... 8
Engine Run Time.................................... 8
Extended Run Time................................ 9
Multi-car Operation ................................. 9
Troubleshooting Poor Transmitting Range
................................................................ 9
Limited Lifetime Warranty…………………….10
DOC: 1.02 – November 1, 2006 TL Manufactured in Canada
Introduction
A
This is a state-of-the-art remote starter system. The system is packed with advanced features such as priority access to the driver’s door (commodity features) and the safe start children safety feature. With many an advanced function, this product will satisfy any one your expectations from high-end commodity and security systems, without neglecting any standard feature commonly offered by entry-level starters.
Using the Remote Control
Your remote starter is equipped with a multi-channel remote control. It can operate two independent vehicles equipped with an identical remote starter unit. (See Multi-car operation section on page 9). The functions of the transmitter are as follows:
LOCK Button:
Locks all Doors and arms the Starter Kill
AUX4 - Left Sliding Door (LSD) Button
TRUNK Button:
Activates the Trunk output (AUX3)
UNLOCK Button:
Unlocks all Doors and disarms the Starter Kill
UX5 - Right Sliding
Door (RSD) Button
START/STOP Button: . Starts or Stops the
engine
PANIC/AUX Button: . Press 3sec will activate Panic Mode (Horn
must be connected) . This button also serves as a Shift button. In combination with other buttons allows assigning different functions to those buttons
Pressing and holding the constant pulse as long as the
LOCK button for more than 3 seconds will lock all doors and will send a
LOCK button is held down (maximum of 15 seconds). This
constant pulse can be configured to activate certain functionalities such as rolling up the windows – Please refer to your installer to see if your vehicle is compatible with this option.
Pressing and holding the send a constant pulse as long as the
UNLOCK button for more than 3 seconds will unlock all doors and will
UNLOCK button is held down (maximum of 15 seconds).
This constant pulse can be configured to activate certain functionalities such as rolling down the
P. 2 User Guide
windows – Please refer to your installer to see if your vehicle is compatible with this option.
Multi-Level Features (default state)
Basic Features (press the PANIC/AUX button 1X)
PANIC/AUX ¾ LOCK ..................................................................................AUX 2
PANIC/AUX ¾ START/STOP.......................................................................cold weather
Multi-Car Operation (press the PANIC/AUX button 2X)
PANIC/AUX ¾ PANIC/AUX ¾ LOCK: ............................................2nd car lock
PANIC/AUX ¾ PANIC/AUX ¾ UNLOCK: ............................................2
PANIC/AUX ¾ PANIC/AUX ¾ START/STOP: ............................................2
PANIC/AUX ¾ PANIC/AUX ¾ TRUNK: ............................................2
Customized Features (press the PANIC/AUX button 3X)
(May not be applicable for certain vehicles)
Your installer can add customized features such as turning on the radio, opening sliding doors, etc.
PANIC/AUX ¾ PANIC/AUX ¾ PANIC/AUX ......................... ¾ LOCK: customized feature 1
PANIC/AUX ¾ PANIC/AUX ¾ PANIC/AUX ......................... ¾ UNLOCK: customized feature 2
PANIC/AUX ¾ PANIC/AUX ¾ PANIC/AUX ......................... ¾ TRUNK: customized feature 3
PANIC/AUX ¾ PANIC/AUX ¾ PANIC/AUX ......................... ¾ START/STOP: customized feature 4
By default, the multi-level features are programmed as follows:
x Level 1 (Basic Features) x Level 2 (Multi car operation) x Level 3 (Customized Features)
x To access a feature that is programmed as level 1, press the
by the desired function.
x To access a feature that is programmed as level 2, press the PANIC/AUX button twice followed
by the desired function.
x To access a feature that is programmed as level 3, press the
followed by the desired function.
Your installer can customize the system as to personalize these multi-level features in an order that best suits you. Your options are:
Option 1:
Level 1
(requires pressing the PANIC/AUX button 1X) Æ Multi car operation (requires pressing the PANIC/AUX button 2X) Æ Basic features
Level 2 Level 3 (requires pressing the PANIC/AUX button 3X) Æ Customized features
Option 2:
(requires pressing the PANIC/AUX button 1X) Æ Basic features
Level 1 Level 2 (requires pressing the PANIC/AUX button 2X) Æ Multi car operation Level 3 (requires pressing the PANIC/AUX button 3X) Æ Customized features
Option 3:
(requires pressing the PANIC/AUX button 1X) Æ Customized features
Level 1
(requires pressing the PANIC/AUX button 2X) Æ Multi car operation
Level 2 Level 3 (requires pressing the PANIC/AUX button 3X) Æ Basic features
Option 4:
(requires pressing the PANIC/AUX button 1X) Æ Basic features
Level 1
(requires pressing the PANIC/AUX button 2X) Æ Customized features
Level 2 Level 3 (requires pressing the PANIC/AUX button 3X) Æ Multi car operation
nd
car unlock
nd
car start/stop
nd
car trunk
PANIC/AUX button once followed
PANIC/AUX button three times
User Guide P. 3
Loading...
+ 7 hidden pages