Global LCD Panel Exchange Center
www.DataSheet4U.net
DataSheet4U.net
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
(V ) Preliminary Specification
( ) Final Specification
Module
18.5” Color TFT-LCD
M185XW01 V0
Model Name
Customer Date
Approved by
M185XW01 V0
Approved by Date
Prepared by
Chiyinwu
Note: This Specification is subject to
change without notice.
.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Desktop Display Business Group /
AU Optronics corporation
2008/06/13
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
M185XW01 V0
Contents
1.0 Handling Precautions .........................................................................................5
2.0 General Description............................................................................................6
2.1 Display Characteristics.......................................................................................................6
2.2 Optical Characteristics .......................................................................................................7
3.0 Functional Block Diagram................................................................................11
4.0 Absolute Maximum Ratings.............................................................................12
4.1 TFT LCD Module..............................................................................................................12
4.2 Backlight Unit ...................................................................................................................12
4.3 Absolute Ratings of Environment .....................................................................................12
5.0 Electrical characteristics..................................................................................13
5.1 TFT LCD Module..............................................................................................................13
5.1.1 Power Specification....................................................................................................13
5.1.2 Signal Electrical Characteristics.................................................................................14
5.2 Backlight Unit ...................................................................................................................15
6.0 Signal Characteristic ........................................................................................17
6.1 Pixel Format Image ..........................................................................................................17
6.2 The input data format .......................................................................................................18
6.3 Signal Description ............................................................................................................19
6.4 Timing Characteristics ......................................................................................................21
6.5 Timing diagram.................................................................................................................22
6.6 Power ON/OFF Sequence................................................................................................23
7.0 Connector & Pin Assignment ..........................................................................24
7.1 TFT LCD Module..............................................................................................................24
7.1.1 Pin Assignment ..........................................................................................................24
7.2 Backlight Unit ...................................................................................................................25
7.2.1 Signal for Lamp connector .........................................................................................25
8.0 Reliability Test...................................................................................................26
9.0 Shipping Label ..................................................................................................27
10.0 Mechanical Characteristics............................................................................28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
k
www.panelook.com
Version and
Date
0.1
2008/03/10
0.2
2008/06/02
Product Specification
AU OPTRONICS CORPORATION
Record of Revision
Pag
e
All
First Edition for Customer N/A
All
old format new format
5
2.1 Display Characteristics
1. No screen diagnoal description
2. weight 1900(max) TDB
3. No temperature range
6
View angel
Old description New Description Remar
2.1 Display Characteristics
1. add screen diagnoal :
470.1 mm (18.51”)
2. weight 2000 (max)
3. add temperature range
operating 0~+50 [
o
storage (shipping) -20 to +60 [
M185XW01 V0
C]
o
C]
10
1. I/F PCB interface
FI-XB30SSRL-HF16 (JAE) / MSCKT2407P30B
()
2. Lamp connector
CVILUX CP0502SL090 / YEON HO
35001HS-02L
Mating Type: 35001WR-02LP
14
5.1.2 Signal Electrical
Characteristics
15
5.2 BL unit
(1)
1. I/F PCB Interface:
FI-XB30SSRL-HF16(JAE)/MSCKT2407P30HB(
)
2. Lamp connector
Deleted
(1)
(2) Note 8: The CCFL can work normally if the
PWM Dimming ratio range is from 20% to 100%
and the lamp current is 7.5mA
(2) Deleted Notes 8
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
q
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
21
6.4.1 Timing Characteristics
7.1 TFT LCD Module
24
25
7.2 Backlight Unit
Connector Name / Designation Lamp Connector / Backlight lamp
Manufacturer
Type Part Number
Mating Type Part Number
27
9.0 Shipping Label
CVILUX or YEON HO
CP0502SL090/35001HS-02L
CP0502P1ML0/35001W R-02LP
Connector Name / Designation Lamp Connector / Backlight lamp
Manufacturer
Type Part Number 35001HS-02L
Mating Type Part Number 35001WR-02LP
YEON HO
M185XW01 V0
0.3
2008/6/13
28,2
2D drawing –PCBA 2D drawing –change PCBA size
9
21 6.4.1 Timing Characteristics
Signal Item Symbol Min Typ Max Unit
H-section
Note2 : Clock Fre
uency 90MHz(Max.)= 1416(H)*847(V)*75Hz
Period Th 14 16 1606 2047
Active Tdisp(h) 1366 1366 1366
Blanking Tblk(h) 50 240 681
Tclk
Tclk
Tclk
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
1.0 Handling Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard
surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure human earth
when handling.
7) Do not open or modify the Module Assembly.
8) Do not press the reflector sheet at the back of the module to any directions.
9) In case if a Module has to be put back into the packing container slot after once it was taken
M185XW01 V0
out from the container, do not press the center of the CCFL reflector edge. Instead, press at
the far ends of the CCFL Reflector edge softly. Otherwise the TFT Module may be damaged.
10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the
Interface Connector of the TFT Module.
11) After installation of the TFT Module into an enclosure, do not twist nor bend the TFT Module
even momentary. At designing the enclosure, it should be taken into consideration that no
bending/twisting forces are applied to the TFT Module from outside. Otherwise the TFT
Module may be damaged.
12) Cold cathode fluorescent lamp in LCD contains a small amount of mercury. Please follow
local ordinances or regulations for disposal.
13) Small amount of materials having no flammability grade is used in the LCD module. The LCD
module should be supplied by power complied with requirements of Limited Power Source
(IEC60950 or UL1950), or be applied exemption.
14) The LCD module is designed so that the CCFL in it is supplied by Limited Current Circuit
(IEC60950 or UL1950). Do not connect the CCFL in Hazardous Voltage Circuit.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
M185XW01 V0
2.0 General Description
This specification applies to the 18.5 inch-wide Color a-Si TFT-LCD Module M185XW01.The
display supports the WXGA - 1366(H) x 768(V) screen format and 16.7M colors (RGB 6-bits +
Hi-FRC data). All input signals are 1-channel LVDS interface and this module doesn ’t contain an
inverter board for backlight.
2.1 Display Characteristics
The following items are characteristics summary on the table under 25 condition:
ITEMS Unit SPECIFICATIONS
Screen Diagonal [mm]
Active Area [mm] 409.8 (H) x 230.4 (V)
Pixels H x V 1366(x3) x 768
Pixel Pitch [um] 300 (per one triad) × 300
Pixel Arrangement R.G.B. Vertical Stripe
Display Mode TN Mode, Normally White
White Luminance ( Center ) [cd/m2]
Contrast Ratio 1000 (Typ.)
Optical Response Time [msec] 5ms (Typ., on/off)
470.1(18.51”)
2
300 cd/m
(@ 7.5mA (Typ.)
Nominal Input Voltage VDD [Volt] +5.0 V (Typ)
Power Consumption
(VDD line + CCFL line)
[Watt] 17 W (Typ.)
(without inverter, all black pattern)
Weight [Grams] 2000 (Max)
Physical Size [mm] 430.37 (W) x 254.6 (H) Typ. x 16.5 (D) Max
Electrical Interface One channel LVDS
Support Color 16.7M colors (RGB 6-bit + Hi_FRC )
Surface Treatment Anti-Glare, 3H
Temperature Range
Operating
Storage (Shipping)
o
C]
[
o
C]
[
0 to +50
-20 to +60
RoHS Compliance RoHS Compliance
document version 0.3 6
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
M185XW01 V0
2.2 Optical Characteristics
The optical characteristics are measured under stable conditions at 25 :
Item Unit Conditions Min. Typ. Max. Note
Horizontal (Right)
Viewing Angle [degree]
Contrast ratio Normal Direction 600 1000 -
Response Time [msec]
Color / Chromaticity
Coordinates (CIE)
Color Coordinates (CIE) White
Central Luminance [cd/m2] 240 300 -
Luminance Uniformity
Crosstalk (in 60Hz)
Flicker
[%]
[%]
dB
CR = 10 (Left)
Vertical (Up)
CR = 10 (Down)
Raising Time (TrR)
Falling Time (TrF)
Raising + Falling
Red x
Red y
Green x
Green y
Blue x
Blue y
White x
White y
150 170
140 160
-
-
-
0.618 0.648 0.678
0.309 0.339 0.369
0.262 0.292 0.322
0.573 0.603 0.633
0.113 0.143 0.173
0.040 0.070 0.100
0.283 0.313 0.343
0.299 0.329 0.359
75 80
3.6 5.7
1.4 2.3
5 8
-
-
-
-
-
1.5
-20
2
3
4
5
6
7
8
9
document version 0.3 7
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
M185XW01 V0
Note 1: Measurement method
The LCD module should be stabilized at given temperature for 30 minutes to avoid abrupt
temperature change during measuring (at surface 35 ) . In order to stabilize the luminance, the
measurement should be executed after lighting Backlight for 30 minutes in a stable, windless and
dark room.
Photo detector
Measured distance
LCD Panel
Center of the screen
TFT-LCD
Note 2: Definition of viewing angle measured by ELDIM (EZContrast 88)
Viewing angle is the measurement of contrast ratio 10, at the screen center, over a 180 °
horizontal and 180° vertical range (off-normal viewing angles). The 180 ° viewing angle range is
broken down as follows; 90° (θ) horizontal left and right and 90° (Φ) vertical, high (up) and low
(down). The measurement direction is typically perpendicular to the display surface with the
screen rotated about its center to develop the desired measurement viewing angle.
document version 0.3 8
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
M185XW01 V0
Note 3: Contrast ratio is measured by TOPCON SR-3
Note 4: Definition of Response time measured by Westar TRD-100A
The output signals of photo detector are measured when the input signals are changed from “Full
Black” to “Full White” (rising time, Tr
), and from “Full White” to “Full Black” (falling time, TfF),
R
respectively. The response time is interval between the 10% and 90% (1 frame at 60 Hz) of
amplitudes.
%
Optical
Optical
response
response
100
100
90
10
10
%
W hite Bla ck
0
0
Tr
Tr
F
F
Black
1 Frame 1 Frame
Tr
Tr
R
R
White
+ TfF = 5 msec (typ.).
Tr
R
Note 5: Color chromaticity and coordinates (CIE) is measured by TOPCON SR-3
Note 6: Central luminance is measured by TOPCON SR-3
Note 7: Luminance uniformity of these 9 points is defined as below and measured by
TOPCON SR-3
Uniformity =
9)-(1points9inLuminanceMinimum
9)-(1Points9inLuminanceMaximum
Note 8: Crosstalk is defined as below and measured by TOPCON SR-3
document version 0.3 9
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
l
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
CT = | YB – YA | / YA 100 (%)
Where
YA = Luminance of measured location without gray level 0 pattern (cd/m2)
YB = Luminance of measured location with gray level 0 pattern (cd/m2)
M185XW01 V0
Note 9: Test Patern: Subchecker Pattern measured by TOPCON SR-3
RGBRGB
Gray Level = L127
R GBRGB
RGBRGB
Gray Level = L0
Method: Record dBV & DC value with TRD-100
Amplitude
DC
log20(dB)Flicker =
DC
AC
Time
Hz)30Level(atAC
Leve
document version 0.3 10
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
M185XW01 V0
3.0 Functional Block Diagram
The following diagram shows the functional block of the 18.5 inch Color TFT-LCD Module:
LVD
+5V
Connector
LVDS
Receiver
AUO
Timing
Controller
RSDS
Transmitter
G1
G768
Y-Driver IC
TFT-LCD
1366(x3) x 768
Pixels
-Driv
r I
DC/DC
Converter
Gamma
Correction
I/F + X-PCB
DC
I/F PCB Interface:
FI-XB30SSRL-HF16(JAE)/MSCKT2407P30HB()
Mating Type:
FI-X30HL (JAE)(Locked Type)
D1 D4098
2 CCFL
Inverter
document version 0.3 11
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
4.0 Absolute Maximum Ratings
Absolute maximum ratings of the module are as following:
4.1 TFT LCD Module
Item Symbol Min Max Unit Conditions
Logic/LCD Drive
Voltage
4.2 Backlight Unit
Item Symbol Min Max Unit Conditions
CCFL Current ICFL
4.3 Absolute Ratings of Environment
VDD 4.5 +5.5 [Volt] Note 1,2
3.0 8
M185XW01 V0
[mA] rms Note 1,2
Item Symbol Min. Max. Unit Conditions
Operating Temperature TOP 0 +50 [oC]
Operation Humidity HOP 5 90 [%RH]
Storage Temperature TST -20 +60 [oC]
Storage Humidity HST
590
[%RH]
Note 1: With in Ta (25)
Note 2: Permanent damage to the device may occur if exceeding maximum values
Note 3: For quality perfermance, please refer to AUO IIS(Incoming Inspection Standard).
Note 3
Operating Range Storage Range
document version 0.3 12
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
M185XW01 V0
AU OPTRONICS CORPORATION
5.0 Electrical characteristics
5.1 TFT LCD Module
5.1.1 Power Specification
Input power specifications are as following:
Symbol Parameter Min Typ Max Unit Conditions
VDD
IDD Input Current
PDD VDD Power
IRush Inrush Current
Logic/LCD Drive
Voltage
4.5
-
-
-
5.0
1.2
5.5
1.5
6 8.25 [Watt]
[Volt] +/-10%
[A]
VDD= 5.0V, All Black Pattern
At 60Hz,
VDD= 5.0V, All Black Pattern
At 60Hz
- 3 [A] Note 1
VDDrp
Allowable Logic/LCD
Drive Ripple Voltage
-
- 200 [mV] p-p
Note 1: Measurement conditions:
The duration of rising time of power input is 470us.
(High to Low)
Control
Signal
SW1
SW MAG-SPST
1 2
+12.0V
+5.0V
C2
1uF/25V
R1
47K
R2
1K
VR1
47K
D6
D5
D2 S
D1
G
C3
0.01uF/25V
Q3
AO6402
D2SD1D5
G
D6
Q3
AO6402
VDD= 5.0V, All Black Pattern
At 60Hz
F1
VCC
C1
1uF/16V
(LCD Module Input)
document version 0.3 13
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
M185XW01 V0
5.1.2 Signal Electrical Characteristics
Input signals shall be low or Hi-Z state when VDD is off. Please refer to specifications of
SN75LVDS82DGG (Texas Instruments) in detail.
Characteristics of each signal are as following:
Symbol Parameter Min Typ Max Units Condition
VTH
VTL
VID Input Differential Voltage 100 400 600 [mV] Note 1
VICM
Differential Input High
Threshold
Differential Input Low
Threshold
Differential Input Common
Mode Voltage
- +50 +100 [mV]
-100 -50 - [mV]
+1.0 +1.2 +1.4 [V]
VICM = 1.2V
Note 1
VICM = 1.2V
Note 1
VTH-VTL = 200MV (max)
Note 1
Note 1: LVDS Signal Waveform
VTH
VTL
VICM
VID
VSS
document version 0.3 14
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
M185XW01 V0
5.2 Backlight Unit
Parameter guideline for CCFL Inverter is under stable conditions at 25 (Room Temperature):
Parameter Min. Typ. Max. Unit Note
CCFL Standard Current (ISCFL) 7.0
CCFL Operation Current (IRCFL)
CCFL Frequency (FCFL) 40 50 80 [KHz]
CCFL Ignition Voltage (ViCFL, Ta= 0 ) 1650 - - [Volt] rms
CCFL Ignition Voltage (ViCF, Ta= 25 ) 1250 - - [Volt] rms
CCFL Operation Voltage (VCFL) -
CCFL Power Consumption (PCFL) - 11 12.1 [Watt]
3.0 7.5
7.5 8.0
700
(@7.5mA)
[mA] rms
8.0
880 [Volt] rms
[mA] rms
2
3, 4
5
6
CCFL Life Time (LTCFL)
40,000 50,000
- [Hour]
7
Note 1: Typ. values are AUO recommended design values.
*1 All of characteristics listed are measured under the condition using the AUO test inverter.
*2 It is recommended to check the inverter carefully. Sometimes, interfering noise stripes appear
on the screen, and substandard luminance or flicker at low power may happen.
*3 While designing an inverter, it is suggested to check safety circuit very carefully. Impedance of
CCFL, for instance, becomes more than 1 [M ohm] when CCFL is damaged.
*4 Generally, CCFL has certain delay time after applying kick-off voltage. It is recommended to
keep on applying kick-off voltage for 1 [Sec] until discharge.
*5 Reducing CCFL current will increase CCFL discharge voltage and generally increases CCFL
discharge frequency. So all the parameters of the inverter should be carefully designed so the
inverter will not produce too much leakage current from high-voltage output.
*6 For designing CCFL current, it is highly recommanded to use symmetric and consistent
sinusoidal wave for each CCFL input current with asymmetric ration of 10% or less in both
postive area and negative area (ie. 0.9*2*I
< I1& I2< 1.1*2*I
rms
) as refer to the following
rms
diagram, otherwise proper CCFL functionality cannot be guarantied.
document version 0.3 15
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
M185XW01 V0
Note 2: CCFL standard current is measured by continue mode inverter at 25 2.
Note 3: CCFL discharge frequency should be carefully determined to avoid interference between
inverter and TFT LCD.
Note 4: The frequency range will not affect lamp life and reliability characteristics.
Note 5: CCFL inverter should be able to release power that has generating capacity exceeding
1650 volt. Lamp units need minimum voltage, 1650 Volt, for ignition.
Note 6: The variance of CCFL power consumption is ±10%. (IRCFL × VCFL × 2 = PCFL)
Note 7: Definition of life time: brightness becomes 50%. The minimum life time of CCFL unit is on
the condition of 7.5mA CCFL current and 252.
document version 0.3 16
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
M185XW01 V0
6.0 Signal Characteristic
6.1 Pixel Format Image
Following figure shows the relationship of the input signals and LCD pixel format.
1 2 1365 1366
1st Line
R G B R G B
R G B R G B
768 Line
R G B R G B
R G B R G B
document version 0.3 17
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
6.2 The input data format
Product Specification
AU OPTRONICS CORPORATION
LVDS Data Mapping of NS Format
M185XW01 V0
LVDS Data Mapping of JEIDA Format
Note1: Normally, DE, VS, HS on EVEN channel are not used.
Note2: 8-bits signal input.
document version 0.3 18
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
M185XW01 V0
6.3 Signal Description
The module using one LVDS receiver SN75LVDS82(Texas Instruments). LVDS is a
differential signal technology for LCD interface and high speed data transfer device. LVDS
transmitters shall be SN75LVDS83(negative edge sampling). The first LVDS port(RxOxxx)
transmits odd pixels while the second LVDS port(RxExxx) transmits even pixels.
PIN # SIGNAL NAME DESCRIPTION
1 NC No contact (For AUO internal use)
2 NC No contact (For AUO internal use)
3 NC No contact (For AUO internal use)
4 GND Power Ground
5 RXIN0- Negative LVDS differential data input (0)
6 RXIN0+ Positive LVDS differential data input (0)
7 GND Power Ground
8 RXIN1- Negative LVDS differential data input (1)
9 RXIN1+ Positive LVDS differential data input (1)
10 GND Power Ground
11 RXIN2- Negative LVDS differential data input (2)
12 RXIN2+ Positive LVDS differential data input (2)
13 GND Power Ground
14 RXCLKIN- Negative LVDS differential clock input (clock)
15 RXCLKIN+ Positive LVDS differential data input (clock)
16 GND Power Ground
17 RXIN3- Negative LVDS differential data input (3)
18 RXIN3+ Positive LVDS differential data input (3)
19 GND Power Ground
20 NC No contact (For AUO internal use)
21 NC No contact (For AUO internal use)
22 NC No contact (For AUO internal use)
23 GND Power Ground
24 GND Power Ground
25 GND Power Ground
26 VCC +5V power supply
27 VCC +5V power supply
28 VCC +5V power supply
29 VCC +5V power supply
30 VCC +5V power supply
Note1: Start from left side
document version 0.3 19
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
M185XW01 V0
1
NC
Note2: Input signals of clock shall be the same timing.
Note3: Please follow TV VESA Pin Assignment.
30
VCC
document version 0.3 20
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
M185XW01 V0
6.4 Timing Characteristics
Basically, interface timing described here is not actual input timing of LCD module but close to
output timing of SN75LVDS82DGG (Texas Instruments) or equivalent.
Signal
Item
Symbol Min Typ Max Unit
Period Tv 776 808 1023 Th
V-section
H-section
Active T disp(v) 768 768 768
Blanking Tblk(v) 8 40 255
Period Th 1416 1606 2047
Active Tdisp(h) 1366 1366 1366
Blanking Tblk(h) 50 240 681
Th
Th
Tclk
Tclk
Tclk
Period Tclk - 12.8 - ns
Clock
Frame Rate
Frequency
Frame Rate
Freq
F
-7890MHz
50 60 75 Hz
Note1 : DE mode only
Note2 : Clock Frequency 90MHz(Max.)= 1416(H)*847(V)*75Hz
document version 0.3 21
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
6.5 Timing diagram
Product Specification
AU OPTRONICS CORPORATION
M185XW01 V0
document version 0.3 22
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
M185XW01 V0
6.6 Power ON/OFF Sequence
VDD power and lamp on/off sequence are as follows. Interface signals are also shown in the
chart. Signals from any system shall be Hi-Z state or low level when VDD is off.
Parameter
Value
Min. Typ. Max.
T1 0.5 - 10 [msec]
T2 0 40 50 [msec]
T3 200 - - [msec]
T4 200 - - [msec]
T5 0.5 16 50 [msec]
T6 - - 100 [msec]
T7 1000 - - [msec]
document version 0.3 23
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Unit
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
M185XW01 V0
7.0 Connector & Pin Assignment
Physical interface is described as for the connector on module. These connectors are capable of
accommodating the following signals and will be following components.
7.1 TFT LCD Module
Connector Name / Designation Interface Connector / Interface card
Manufacturer JAE or STM
Type Part Number FI-XB30SSRL-HF16(JAE)/MSCKT2407P30HB(STM)
Mating Housing Part Number
FI-X30HL(JAE) (Locked Type)
FI-X30H (JAE)(Unlocked Type)
7.1.1 Pin Assignment
Pin# Signal Name Pin# Signal Name
1NC 2NC
3 NC 4 GND
5
7
9
11
13
15
17
19
RXIN0-
GND
RXIN1+
RXIN2-
GND
RXCLKIN+
RXIN3-
GND
6
8
10
12
14
16
18
20 NC
21 NC 22 NC
23
25
GND
GND
24
26 VCC
27 VCC 28 VCC
RXIN0+
RXIN1-
GND
RXIN2+
RXCLKIN-
GND
RXIN3+
GND
29 VCC 30 VCC
document version 0.3 24
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
M185XW01 V0
7.2 Backlight Unit
Physical interface is described as for the connector on module. These connectors are capable of
accommodating the following signals and will be following components.
Connector Name / Designation Lamp Connector / Backlight lamp
Manufacturer
Type Part Number
Mating Type Part Number
YEON HO
35001HS-02L
35001WR-02LP
7.2.1 Signal for Lamp connector
Upper
Lower
Connector No. Pin No. Input Color Function
CN1
Connector No. Pin No. Input Color Function
CN2
1 Hot1 Pink High Voltage (Lamp1)
2 Cold1 White Low Voltage(Lamp1)
1 Hot1 Pink High Voltage(Lamp2)
2 Cold1 White Low Voltage (Lamp2)
document version 0.3 25
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
8.0 Reliability Test
Environment test conditions are listed as following table.
Items Required Condition
Temperature Humidity Bias (THB) Ta= 50 , 80%RH, 300hours
High Temperature Operation (HTO) Ta= 50 , 50%RH, 300hours
Low Temperature Operation (LTO) Ta= 0 , 300hours
High Temperature Storage (HTS) Ta= 60 , 300hours
Low Temperature Storage (LTS) Ta= -20 , 300hours
Acceleration: 1.5 Grms
Vibration Test
(Non-operation)
Wave: Random
Frequency: 10 - 200 Hz
Sweep: 30 Minutes each Axis (X, Y, Z)
M185XW01 V0
Note
Acceleration: 50 G
Shock Test
(Non-operation)
Drop Test Height: 60 cm, package test
Thermal Shock Test (TST) -20/30min, 60/30min, 100 cycles
On/Off Test On/10sec, Off/10sec, 30,000 cycles
ESD (Electro Static Discharge)
Altitude Test
Wave: Half-sine
Active Time: 20 ms
Direction: X, Y, Z (one time for each Axis)
1
Contact Discharge: ± 8KV, 150pF(330Ω ) 1sec,
8 points, 25 times/ point.
2
Air Discharge: ± 15KV, 150pF(330Ω ) 1sec
8 points, 25 times/ point.
Operation:10,000 ft
Non-Operation:30,000 ft
Note 1: The TFT-LCD module will not sustain damage after being subjected to 100 cycles of rapid
temperature change. A cycle of rapid temperature change consists of varying the temperature from
0
-2
to 60, and back again. Power is not applied during the test. After temperature cycling, the
unit is placed in normal room ambient for at least 4 hours before power on.
Note 2: EN61000-4-2, ESD class B: Certain performance degradation allowed
No data lost
Self-recoverable
No hardware failures.
document version 0.3 26
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
9.0 Shipping Label
The label is on the panel as shown below:
Note 1: For Pb Free products, AUO will add for identification.
M185XW01 V0
Note 2: For RoHS compatible products, AUO will add
Note 3: For China RoHS compatible products, AUO will add
for identification.
for identification.
Note 4: The Green Mark will be presented only when the green documents have been ready by
AUO Internal Green Team.
document version 0.3 27
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Ver 0.1
10.0 Mechanical Characteristics
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Ver 0.1
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Loading...