How it Works
AUO
Loading...
M170EG01 VH
Specification
25 pgs1.16 Mb0

AUO M170EG01 VH Specification

Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
M170EG01 VH
( ) Preliminary Specification ( V ) Final Specification
Module 17.0” SXGA Color TFT-LCD
Model Name M170EG01 VH
Customer Date
Approved by
Checked &
Approved by
Winnie Chang
Prepared by
Archer Cheng
Date
2011/01/24
2011/01/24
Note: This Specification is subject to change without
notice.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Desktop Display Business Group /
AU Optronics corporation
1/25
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
Contents
M170EG01 VH
1. Handling Precautions ..................................................................................................................4
2. General Description..................................................................................................................... 5
2.1 Display Characteristics ........................................................................................................................ 5
3. Functional Block Diagram.........................................................................................................10
4. Absolute Maximum Ratings...................................................................................................... 11
4.1 TFT LCD Module ............................................................................................................................. 11
4.2 Backlight Unit.................................................................................................................................... 11
4.3 Absolute Ratings of Environment ...................................................................................................... 11
5. Electrical characteristics .......................................................................................................... 12
5.1 TFT LCD Module ............................................................................................................................. 12
5.2 Backlight Unit.................................................................................................................................... 14
6. Signal Characteristic .................................................................................................................15
6.1 Pixel Format Image ........................................................................................................................... 15
6.2 The Input Data Format ...................................................................................................................... 15
6.4 Timing Characteristics....................................................................................................................... 18
6.5 Power ON/OFF Sequence................................................................................................................. 20
7. Connector & Pin Assignment ...................................................................................................21
7.1 TFT LCD Module ............................................................................................................................. 21
7.2 Backlight Unit.................................................................................................................................... 22
8. Reliability Test............................................................................................................................ 23
9. Shipping Label............................................................................................................................24
10. Mechanical Characteristics ....................................................................................................25
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
2/25
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
M170EG01 VH
AU OPTRONICS CORPORATION
Record of Revision
Version and
Date
0.1 2010/02/03 All First Edition for Customer All
0.2 2010/5/18 p.10 Manufacturer
p.12
p.12
1.0 2010/10/29 p.10
1.0 2011/01/24 p. 20 T3(min)=300, T5(min)=0
Page Old description New Description Remark
YENONHO
Type Part Number
35001HS-02L or CP0521S1
Mating Type Part Number
5001WR-00LS00 or CP0502SL090
3
P-Two AL230T-A0G1D-P
Manufacturer
YEONHO
Type Part Number
35001HS-02L or CP0502SL090
Mating Type Part Number
35001WR-02L or CP0502P1ML0
P-Two 187034-30091
T3(min)=500,T5(min)=40;Power sequence
timing revised (see page 20 in details.)
revised
revised
revised
revised
revised
All Final version to all customer
3/25
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
M170EG01 VH
1. Handling Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure human earth when
handling.
7) Do not open or modify the Module Assembly.
8) Do not press the reflector sheet at the back of the module to any directions.
9) In case if a Module has to be put back into the packing container slot after once it was taken out
from the container, do not press the center of the CCFL reflector edge. Instead, press at the far
ends of the CCFL Reflector edge softly. Otherwise the TFT Module may be damaged.
10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the
Interface Connector of the TFT Module.
11) After installation of the TFT Module into an enclosure, do not twist nor bend the TFT Module even
momentary. At designing the enclosure, it should be taken into consideration that no
bending/twisting forces are applied to the TFT Module from outside. Otherwise the TFT Module
may be damaged.
12) Cold cathode fluorescent lamp in LCD contains a small amount of mercury. Please follow local
ordinances or regulations for disposal.
13) Small amount of materials having no flammability grade is used in the LCD module. The LCD module
should be supplied by power complied with requirements of Limited Power Source (IEC60950 or
UL1950), or be applied exemption.
14) The LCD module is designed so that the CCFL in it is supplied by Limited Current Circuit (IEC60950 or
UL1950). Do not connect the CCFL in Hazardous Voltage Circuit.
15) Please avoid touching COF position while you are doing mechanical design.
4/25
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
M170EG01 VH
2. General Description
This specification applies to the 17 inch Color TFT-LCD Module M170EG01 VH.
The display supports the SXGA+ (1280(H) x 1024(V)) screen format and 16.7M colors (RGB 6-bits+Hi-RFC data).All input signals are 2 Channel LVDS interface compatible.
This module does not contain an inverter card for backlight.
2.1 Display Characteristics
The following items are characteristics summary on the table under 25 к condition:
Items Unit Specifications
Screen Diagonal [mm] 432 (17.0”)
Active Area [mm] 337.920(H) × 270.336(V)
Pixels H x V 1280 × 3(RGB) × 1024
Pixel Pitch [mm] 0.264(per one triad) × 0.264
Pixel Arrangement R.G.B. Vertical Stripe
Display Mode Normally White
White Luminance [cd/m2] 250 (center,Typ)@7.5 mA
Contrast Ratio 1000 : 1 (Typ)
Optical ResponseTime [msec] 5 (Typ)
Nominal Input Voltage VDD [Volt] +5.0 (Typ)
Power Consumption (VDD line + CCFL line)
[Watt]
12.35W => (Typ.) (without inverter, all black pattern)
Weight [Grams] 1990 Typ.
Physical Size (H x V x D) [mm] 358.5(H) x 296.5(V) Typ. x 15.8(D) Max.
Electrical Interface Dual Channel LVDS
Surface Treatment Anti-glare type, Hardness 3H
Support Color 16.7M colors (RGB 6-bits +Hi-FRC data)
Temperature Range
Operating Storage (Non-Operating)
o
C]
[ [oC]
0 to +50
-20 to +60
RoHS Compliance RoHS Compliance
Digital Gamma turn on Compliance
TCO5.0 Compliance
5/25
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
2.2 Optical Characteristics
Product Specification
AU OPTRONICS CORPORATION
M170EG01 VH
The optical characteristics are measured under stable conditions at 25к (Room Temperature):
Item Unit Conditions Min. Typ. Max. Note
Horizontal (Right) CR = 10 (Left)
Viewing Angle [degree]
Vertical (Up) CR = 10 (Down)
Luminance Uniformity [%] 9 Points 75 80 - 2, 3
Rising - 3.5 6
Optical Response Time [msec]
Falling - 1.5 3
Rising + Falling - 5 9
140 170 -
1
140 160 -
4, 6
Red x 0.618 0.648 0.678
Red y 0.309 0.339 0.369
Green x 0.262 0.292 0.322
Color / Chromaticity Coordinates (CIE 1931)
Green y 0.573 0.603 0.633
4
Blue x 0.113 0.143 0.173
Blue y 0.040 0.070 0.100
White x 0.283 0.313 0.343
White y 0.299 0.329 0.359
White Luminance (At CCFL= 7.5mA)
[cd/m2 ]
200 250 - 4
Contrast Ratio 600 1000 - 4
Cross Talk (At 75Hz) [%] - - 1.5 5
Flicker [dB] - - -20
7
Optical Equipment: BM-5A, BM-7, PR880, or equivalent
6/25
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
Note 1: Definition of viewing angle
Viewing angle is the measurement of contrast ratio Њ10, at the screen center, over a 180° horizontal and
180° vertical range (off-normal viewing angles). The 180° viewing angle range is broken down as follows;
90° (Ӱ) horizontal left and right and 90° (ӥ) vertical, high (up) and low (down). The measurement direction
is typically perpendicular to the display surface with the screen rotated about its center to develop the desired
measurement viewing angle.
M170EG01 VH
Note 2: 9 points position
90 %
50 %
10 %
10 %
50 %
90 %
Note 3: The luminance uniformity of 9 points is defined by dividing the maximum luminance values by the minimum test point luminance
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Ӭ
W9
Minimum Luminance of 9 points
=
Maximum Luminance of 9 points
7/25
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
M170EG01 VH
Note 4: Measurement method
The LCD module should be stabilized at given temperature for 30 minutes to avoid abrupt temperature
change during measuring. In order to stabilize the luminance, the measurement should be executed after
lighting Backlight for 30 minutes in a stable, windless and dark room. ʳ
Photo detector
Field=2
50 cm
Note 5: Definition of Cross Talk (CT)
CT = | YB – YA | / YA Ø 100 (%)
Where
YA = Luminance of measured location without gray level 0 pattern (cd/m2)
YB = Luminance of measured location with gray level 0 pattern (cd/m2)
LCD Panel
Center of the screen
TFT-LCD Module
8/25
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Loading...
+ 17 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use