AUO M150XN07 V5 Specification

M150XN07 V5(QD15XL1301) Page 1/22

( ) Preliminary Specification

( V ) Final Specification

Module 15.0” XGA Color TFT-LCD

Model Name M150XN07 V5(QD15XL1301)

Customer Date

Approved by

Checked &

Approved by

CC Chiu

Prepared by

Gina Yu

Date

2006/12/29

2006/12/29

Note: This Specification is subject to change
without notice.

document version 0.1

Desktop Display Business Group /

AU Optronics corporation

M150XN07 V5(QD15XL1301) Page 2/22

These specification sheets are the proprietary product of AU Optronics (”AUO”) and include
materials protected under copyright of AUO. Do not reproduce or cause any third party to
reproduce them in any form or by any means, electronic or mechanical, for any purpose, in
whole or in part, without the express written permission of AUO.

The device listed in these technical literature sheets was designed and manufactured for use
in OA equipment.

In case of using the device for applications such as control and safety equipment for
transportation (aircraft, trains, automobiles, etc. ), rescue and security equipment and various
safety related equipment which require higher reliability and safety, take into consideration
that appropriate measures such as fail-safe functions and redundant system design should be
taken.

Do not use the device for equipment that requires an extreme level of reliability, such as
aerospace applications, telecommunication equipment (trunk lines), nuclear power control
equipment and medical or other equipment for life support.

AUO assumes no responsibility for any damage resulting from the use of the device which
does not comply with the instructions and the precautions specified in these technical
literature sheets.

Contact and consult with a AUO sales representative for any questions about this device.

document version 0.1

M150XN07 V5(QD15XL1301) Page 3/22

Revision History

REV. Date Change Content

0.1

12/29/06

Specification Initiate

document version 0.1

M150XN07 V5(QD15XL1301) Page 4/22

1. Application
This specification applies to a color TFT-LCD module, M150XN07 V5.

2. Overview
This module is a color active matrix LCD module incorporating amorphous silicon TFT
(Thin Film Transistor). It is composed of a color TFT-LCD panel, driver ICs, control circuit and
power supply circuit and a backlight unit. Graphics and texts can be displayed on a 1024×3
768 dots panel with 16.2M colors by using LVDS (L
interface and supplying +3.3V DC supply voltage for TFT-LCD panel driving and supply
voltage for backlight.
The TFT-LCD panel used for this module has very high aperture ratio. A low-reflection and
higher-color-saturation type color filter is also used for this panel. Therefore, high-brightness
and high-contrast image, which is suitable for the multimedia use, can be obtained by using
this module.
Optimum viewing direction is 6 o'clock.

[Features]

1) High aperture panel; high-brightness or low power consumption.

2) Brilliant and high contrast image.

3) Small footprint and thin shape.

4) Light weight.

5) Interface 6bit + FRC

6) RoHS compliant

ow Voltage Differential Signaling) to

×

3. Mechanical Specifications
Parameter Specifications Unit

Display size 15” Diagonal inch
Active area 304.1X228.1 mm
Pixel format 1024 (H)×768 (V) Pixel
(1 pixel = R+G+B dots)
Pixel pitch 0.297 (H) × 0.297 (V) mm
Pixel configuration R,G,B vertical stripe
Display mode Normally white
Unit outline dimensions (typ.)*1 326.5(W)×253.5 (H)×11(D)

Mass Max. 950 g
Surface treatment Anti-glare and hard-coating 3H

*1.Note : excluding backlight cables. Outline dimensions is shown in this specification

mm

document version 0.1

M150XN07 V5(QD15XL1301) Page 5/22

4. Input Terminals

4-1. TFT-LCD panel driving
CN1 ( 1 channel, LVDS signals – NSC/Ti standard and +3.3V DC power supply)

Using connector: DF14H-20P-1.25H (Hirose)

Interface Cable Pin Assignments
PIN NO . SYMBOL FUNCTION
1 VDD Power Supply, 3.3 V (typical)
2 VDD Power Supply, 3.3 V (typical)
3 GND Ground
4 GND Ground
5 RxIN0- LVDS Receiver IN0- Signal
6 RxIN0+ LVDS Receiver IN0+ Signal
7 GND Ground
8 RxIN1- LVDS Receiver IN1- Signal
9 RxIN1+ LVDS Receiver IN1+ Signal
10 GND Ground
11 RxIN2- LVDS Receiver IN2- Signal
12 RxIN2+ LVDS Receiver IN2+ Signal
13 GND Ground
14 RxCLKIN- LVDS CLOCK - Signal
15 RxCLKIN+ LVDS CLOCK + Signal
16 GND Ground
17 RxIN3- LVDS Receiver IN3- Signal
18 RxIN3+ LVDS Receiver IN3+ Signal
19 GND Ground
20 GND Ground

【

Note 1】Relation between LVDS signals and actual data shows below section (4-2).

【

Note 2】The shielding case is connected with signal GND.

document version 0.1

M150XN07 V5(QD15XL1301) Page 6/22

V

B

A

V

V

4-2 Interface block diagram

User

DD

Control Signals

COM/CS
Gamma
DVDD

VDD

GVDD/GVEE

com/CS Driver

Gamma Generator

DC-DC Converter

LVDS & Timing
Controller (87346)

Source Driver

FPC Connector Gate Driver

S3840

S3074

S1

TFT-LCD Panel

G1024G1

document version 0.1

Control & Source PCB

Gate PC

M150XN07 V5(QD15XL1301) Page 7/22

4-3. Backlight driving
CN2 (connector): BHR-03VS-1(JST)
Mating connector:SM02(8.0) B-BHS-1(JST)

Pin No. Symbol Function

1

Ｖ

Power supply for lamp

HIGH

(High voltage side)
2 NC
3

Ｖ

Power supply for lamp

LOW

(Low voltage side)

5. Absolute Maximum Ratings
5-1 LCD module

Parameter Symbol Condition Ratings Unit Remark

Input voltage

VI

Ta=25

0.3 ～ Vcc+0.3

℃ －

Ｖ

【

Note1】
+3.3V supply voltage Vcc Ta=25℃ 0 ～ ＋ 4
Storage temperature Tstg
Operating temperature (Ambient) Topa

－

－

－25 ～ ＋60
0 ～ ＋50

Ｖ

℃

℃

Note2】

【

【Note1】LVDS signals
【Note2】Humidity：95%RH Max. at Ta≦40℃.
Maximum wet-bulb temperature at 39℃ or less at Ta>40℃.
No condensation.

document version 0.1