Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
G240HW01 V0
ϮϮϮϮʳʳʳʳ Preliminary Specification
ϭϭϭϭʳʳʳʳ Final Specification
Module 24.0” Color TFT-LCD
Model Name G240HW01 V0
Customer Date
Approved by Date
Checked &
Approved by
Note: This Specification is subject to change
without notice.
Debbie Chiu 2011/05/12
Prepared by
Jimmy Tsai 2011/05/12
General Display Business Division / AU
Optronics corporation
document version 0.3
1
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
G240HW01 V0
Contents
1. Operating Precautions..................................................................................... 4
2. General Description......................................................................................... 5
2.1 Display Characteristics ..........................................................................................................5
2.2 Optical Characteristics ...........................................................................................................6
3. Functional Block Diagram............................................................................... 9
4. Absolute Maximum Ratings .......................................................................... 10
4.1 TFT LCD Module.................................................................................................................. 10
4.2 Backlight Unit .......................................................................................................................10
4.3 Absolute Ratings of Environment ........................................................................................10
5. Electrical Characteristics .............................................................................. 11
5.1 TFT LCD Module.................................................................................................................. 11
5.2 Backlight Unit .......................................................................................................................13
6. Signal Characteristic ..................................................................................... 14
6.1 Pixel Format Image.............................................................................................................. 14
6.2 Signal Description ................................................................................................................15
6.3 The Input Data Format.........................................................................................................16
6.4 Interface Timing....................................................................................................................17
6.5 Power ON/OFF Sequence...................................................................................................18
7. Connector & Pin Assignment........................................................................ 19
7.1 TFT LCD Module: LVDS Connector ....................................................................................19
7.2 Backlight Unit: LED Connector............................................................................................20
8. Reliability Test ............................................................................................... 21
9. Mechanical Characteristics........................................................................... 22
10. Label and Packaging ................................................................................... 24
10.1 Shipping Label (on the rear side of TFT-LCD display)......................................................24
10.2 Carton Package .................................................................................................................24
11. Safety............................................................................................................ 25
11.1 Sharp Edge Requirements ................................................................................................25
11.2 Materials ............................................................................................................................. 25
11.3 Capacitors ..........................................................................................................................25
11.4 National Test Lab Requirement .........................................................................................25
document version 0.3
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
2
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
G240HW01 V0
AU OPTRONICS CORPORATION
Record of Revision
Version and Date Page Old description New Description Remark
0.1 2011/02/15
0.2 2011/03/10
0.3 2011/05/11
All First Edition for Customer All
13
22 Old drawing
Update to new one (adding 3 ribs)
Add
document version 0.3
3
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
G240HW01 V0
AU OPTRONICS CORPORATION
1. Operating Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure human earth when handling.
7) Do not open or modify the Module Assembly.
8) In case if a Module has to be put back into the packing container slot after once it was taken out from the
container, take it easily, or the TFT Module may be damaged.
9) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the Interface
Connector of the TFT Module.
10) After installation of the TFT Module into an enclosure, do not twist nor bend the TFT Module even momentary.
At designing the enclosure, it should be taken into consideration that no bending/twisting forces are applied to
the TFT Module from outside. Otherwise the TFT Module may be damaged.
11) Small amount of materials having no flammability grade is used in the LCD module. The LCD module should
be supplied by power complied with requirements of Limited Power Source (IEC60950 or UL1950), or be
applied exemption.
12) Severe temperature condition may result in different luminance, response time and LED life time.
13) The data on this specification sheet is applicable when LCD module is placed in landscape position.
14) Continuous displaying fixed pattern may induce image sticking. It is recommended to use screen saver or
shuffle content periodically if fixed pattern is displayed on the screen.
document version 0.3
4
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
G240HW01 V0
2. General Description
This specification applies to the 24 inch-wide Color TFT-LCD Module G240HW01 V0. The display supports the Full
HD - 1920(H) x 1080(V) screen format and 16.7M colors (RGB 8-bits data). All input signals are dual channel
LVDS interface.
LED driver board is included. G240HW01 V0 is designed for industrial display applications.
2.1 Display Characteristics
The following items are characteristics summary on the table under 25 condition:
ITEMS Unit SPECIFICATIONS
Screen Diagonal [mm] 609.7(24.0”)
Active Area [mm] 531.36 (H) x 298.89 (V)
Pixels H x V 1920(x3) x 1080
Pixel Pitch [um] 276.75 (per one triad) ×276.75
Pixel Arrangement R.G.B. Vertical Stripe
Display Mode VA Mode, Normally Black
White Luminance ( Center ) [cd/m2] 300
Contrast Ratio 3000: 1
Optical Response Time [msec] 25
Nominal Input Voltage VDD [Volt] +5.0 V
Power Consumption [Watt]
Weight [g] 2300 (typical)
Physical Size [mm] 556.0 (W) x 323.2 (H) x 17.0 (D)
Electrical Interface Dual channel LVDS
Support Color 16.7M colors (true 8-bit)
Surface Treatment Anti-Glare, 3H
Temperature Range
Operating
Storage (Shipping)
RoHS Compliance RoHS Compliance
[oC]
[oC]
45
(without inverter, all black pattern)
0 to +50
-20 to +60
document version 0.3
5
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
2.2 Optical Characteristics
The optical characteristics are measured under stable conditions at 25 (Room Temperature):
Item Unit Conditions Min. Typ. Max. Note
White Luminance
Uniformity
Contrast Ratio
Cross talk
Response Time [msec]
Viewing Angle
Color / Chromaticity
Coordinates
(CIE 1931)
Color Gamut %
[cd/m2]
%
%
[degree]
[degree]
[degree]
[degree]
IF= 120mA 240 300 - 1
9 Points
75 80 - 1, 2, 3
1800 3000 - 4
- - 1.5 5
Rising - 16 -
Falling -
Rising + Falling -
Horizontal (Right)
CR = 10 (Left)
Vertical (Upper)
CR = 10 (Lower)
Red x
Red y
Green x
Green y
Blue x
Blue y
White x
White y
75
75
75
75
TBD
TBD
0.313
0.329
69 -
9 -
25 -
89
89
89
89
TBD
TBD
TBD
TBD
G240HW01 V0
6
-
7
-
-
Note 1: Measurement method
Equipment Pattern Generator, Power Supply, Digital Voltmeter, Luminance meter (SR_3 or equivalent)
Aperture
Test Point Center
Environment < 1 lux
LCD Module
SR_3 or
equivalent
document version 0.3
Module Driving Equipment
Measuring distance
6
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
(CR)
g
A
A
www.panelook.com
Product Specification
G240HW01 V0
AU OPTRONICS CORPORATION
Note 2: Definition of 9 points position. Display active area:
90 %
50 %
10 %
10 %
50 %
90 %
Note 3: The luminance uniformity of 9 points is defined by dividing the minimum luminance values by the maximum test
point luminance
Minimum Brightness of nine points
Ӭ
Note 4Κ Definition of contrast ratio (CR):
Contrast ratio
Note 5Κ Definition of cross talk (CT)
W9
=
Maximum Brightness of nine points
Brightness on the “White” state
=
htness on the “Black” state
Bri
CT = | YB – YA | / YA × 100 (%)
Where
YA = Luminance of measured location without gray level 255 pattern (cd/m2)
YB = Luminance of measured location with gray level 255 pattern (cd/m2)
1/2
1/6
2/3 1/3
1/6
1/2
B
127 gray level
document version 0.3
127 gray level
7
1/2
’
1/6
1/6
1/3
1/2
B’
2/3
255 gray level
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
G240HW01 V0
AU OPTRONICS CORPORATION
Note 6: Definition of response time:
The output signals of photo detector are measured when the input signals are changed from “White” to “Black” (falling
time) and from “Black” to “White” (rising time), respectively. The response time interval is between 10% and 90% of
amplitudes. Please refer to the figure as below.
Optical
Optical
response
response
%
100
90
90
10
10
0
0
Tf Tr
White Black White
White Black White
Tr
Note 7: Definition of viewing angle
Viewing angle is the measurement of cont
!
" #
$ %
& " #
%
!
range (off-normal viewing angles). The 180° viewing angle range is broken down as below: 90° (θ) horizontal left and right,
and 90° (Φ) vertical high (up) and low (down). The measurement direction is typically perpendicular to the display surface
with the screen rotated to its center to develop the desired measurement viewing angle.
document version 0.3
8
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
R
AUO ASIC
www.panelook.com
Product Specification
G240HW01 V0
AU OPTRONICS CORPORATION
3. Functional Block Diagram
The following diagram shows the functional block of the 24 inches wide Color TFT-LCD Module:
+5V
LVDS
DC/DC
Converter
Connector
I/F + X-PCB
LVDS
Receiver
Gamma
Correction
Timing
Controller
L
VDS Connector: JAE (FI-XB30SRL-HF11) or equivalent.
LED Connector: Sin Sheng (MS24049HJ) or equivalent.
DC POWE
G1
G1080
LED driver board
D1 D5760
-
-
TFT-LCD
1920*(3)*1080
Pixels
70 LED
document version 0.3
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
9
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
4. Absolute Maximum Ratings
4.1 TFT LCD Module
Item Symbol Min Max Unit Conditions
Logic/LCD Drive Voltage VDD 0 6.0 [Volt] Note 1,2
4.2 Backlight Unit
Item Symbol Min Max Unit Conditions
LED Current
4.3 Absolute Ratings of Environment
Item Symbol Min. Max. Unit Conditions
Operating Temperature TOP 0 +50 [oC]
Operation Humidity HOP 5 90 [%RH]
Storage Temperature TST -20 +60 [oC]
IF
- 130
[mA] Note 1,2
G240HW01 V0
Note 3
Storage Humidity HST 5 90 [%RH]
Note 1: With in Ta (25к)
Note 2: Permanent damage to the device may occur if exceeding maximum values
Note 3: For quality perfermance, please refer to AUO IIS(Incoming Inspection Standard).
Operating Range Storage Range
document version 0.3
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
10
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
5. Electrical Characteristics
5.1 TFT LCD Module
5.1.1 Power Specification
Symbol Parameter Min Typ Max Units Remark
VDD
IDD
Irush
PDD
Note 1: Measurement condition:
Logic/LCD Drive
Voltage
VDD Current - 900 1200 [mA]
LCD Inrush Current
VDD Power - 4.5 6 [Watt]
4.5 5.0 5.5 [Volt]
f10%
VDD= 5.0V, All White Pattern
At 60Hz
- - 3
[A]
Note 1
VDD= 5.0V, All White Pattern
At 60Hz
G240HW01 V0
(High to Low)
Control
Signal
SW1
SW MAG-SPST
1 2
+12.0V
+5.0V
C2
1uF/25V
R1
47K
R2
1K
VR1
47K
D6
D5
D2 S
D1
G
C3
0.01uF/25V
Q3
AO6402
D2SD1D5
G
D6
Q3
AO6402
F1
VCC
(LCD Module Input)
C1
1uF/16V
90%
5.0V
10%
VDD rising time
0V
0.5ms
document version 0.3
11
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
5.1.2 Signal Electrical Characteristics
Input signals shall be low or Hi-Z state when VDD is off.
Symbol Item Min. Typ. Max. Unit Remark
VTH
VTL
Differential Input High Threshold
Differential Input Low Threshold
ѨVIDѨ Input Differential Voltage
VICM
Differential Input Common Mode Voltage
Note: LVDS Signal Waveform.
- -
-100 -
100
-
100 400 600
0.3 - 1.25
G240HW01 V0
[mV] VCM=1.2V
[mV] VCM=1.2V
[mV]
[V] VTH/VTL=100mV
V
T
ѨVIDѨ
VICM
VSS
document version 0.3
12
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
G240HW01 V0
AU OPTRONICS CORPORATION
5.2 Backlight Unit
5.2.1 LED Driver
Following characteristics are measured under
Symbol Parameter Min Typ Max
Vcc Input Voltage 10.8 12 12.6 Volt
Ivcc Input Current - 2.65 - A 100% Dimming
PLED Power Consumption - 31.8 - Watt 100% Dimming, Note3
FPWM PWM Dimming Frequency 200 - 20k Hz
Swing Voltage 0 3.3 3.6 Volt
Dimming Duty Cycle 10 - 100 % PWM frequencyΚ200Hz
Vanalog Analog Dimming Voltage - N/A - No Analog Dimming
* +
(
)
'
, - . /
0 1(1
. / )
2 345 6
(
. . 78, 7 9 , : )(; : ,
<
Unit
.
Remark
IF LED Forward Current - 120 130 mA Ta = 25oC
Operating Life 50000 - - Hrs Ta = 25oC
Note 1: Ta means ambient temperature of TFT-LCD module,
Note 2: If module is driven by high current or at high ambient temperature & humidity condition. The operating life will be
reduced.
Note 3: LED light bar structure: ( 7 strings x 10pcs / string =70pcs LED)
Note 4: Operating life means brightness goes down to 50% initial brightness. Typical operating life time is estimated data.
document version 0.3
13
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
6. Signal Characteristic
6.1 Pixel Format Image
Following figure shows the relationship of the input signals and LCD pixel format.
1st Line
1 2 1919 1920
R G B R G B
R G B R G B
G240HW01 V0
1080 Line
R G B R G B
R G B R G B
document version 0.3
14
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
G240HW01 V0
AU OPTRONICS CORPORATION
6.2 Signal Description
The module using a pair of LVDS receiver SN75LVDS82(Texas Instruments) or compatible. LVDS is a differential signal
technology for LCD interface and high speed data transfer device. Transmitter shall be SN75LVDS83(negative edge
sampling) or compatible. The first LVDS port(RxOxxx) transmits odd pixels while the second LVDS port(RxExxx) transmits
even pixels.
PIN # SIGNAL NAME DESCRIPTION
1 RXinO0- Negative LVDS differential data input (Odd data)
2 RXinO0+ Positive LVDS differential data input (Odd data)
3 RXinO1- Negative LVDS differential data input (Odd data)
4 RXinO1+ Positive LVDS differential data input (Odd data)
5 RXinO2- Negative LVDS differential data input (Odd data, H-Sync, V-Sync, DSPTMG)
6 RXinO2+ Positive LVDS differential data input (Odd data, H-Sync, V-Sync, DSPTMG)
7 GND Power Ground
8 RxOCLKIN- Negative LVDS differential clock input (Odd clock)
9 RxOCLKIN+ Positive LVDS differential clock input (Odd clock)
10 RXinO3- Negative LVDS differential data input (Odd data)
11 RXinO3+ Positive LVDS differential data input (Odd data)
12 RXinE0- Negative LVDS differential data input (Even data)
13 RXinE0+ Positive LVDS differential data input (Even data)
14 GND Power Ground
15 RXinE1- Positive LVDS differential data input (Even data)
16 RXinE1+ Negative LVDS differential data input (Even data)
17 GND Power Ground
18 RXinE2- Negative LVDS differential data input (Even data)
19 RXinE2+ Positive LVDS differential data input (Even data)
20 RxECLKIN- Negative LVDS differential clock input (Even clock)
21 RxECLKIN+ Positive LVDS differential clock input (Even clock)
22 RXinE3- Negative LVDS differential data input (Even data)
23 RXinE3+ Positive LVDS differential data input (Even data)
24 GND Power Ground
25 NC No contact (For AUO test only)
26 NC No contact (For AUO test only)
27 VDD Power +5V
28 VDD Power +5V
29 VDD Power +5V
30 VDD Power +5V
document version 0.3
15
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
6.3 The Input Data Format
Product Specification
AU OPTRONICS CORPORATION
G240HW01 V0
Note1: 8-bits signal input.
Note2: L:NS alike H:Thine alike
document version 0.3
16
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
G240HW01 V0
AU OPTRONICS CORPORATION
6.4 Interface Timing
6.4.1 Timing Characteristics
Signal Item Symbol Min Typ Max Unit
Clock Frequency 1/ T
Clock
40
Frame Rate Frequency 1/Tv 50 60 75 Hz
Vertical
Section
Horizontal
Section
Period
Active T
Blanking T
Period T
Active T
Blanking T
T
V
VD
VB
H
HD
HB
1088 1120 2047
1080 1080 1080
8 40 967
1034 1060 2047
960 960 960
74 100 1087
Note: DE mode only.
72
83
MHz
T_line
T_clock
6.4.2 Input Timing Diagram
DOTCLK
Input
Data
DE
DE
T
CLOCK
Invaild
Data
T
HB
Input Timing Definition ( DE Mode)
Pixel1Pixel2Pixel3Pixel
T
HD
T
H
T
VB
T
V
N-1
T
VD
Pixel
N
Invaild
Data
Pixel
1
document version 0.3
17
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
G240HW01 V0
AU OPTRONICS CORPORATION
6.5 Power ON/OFF Sequence
VDD power and B/L on/off sequence is as below. Interface signals are also shown in the chart. Signals from any system
shall be Hi-Z state or low level when VDD is off.
or Analog dimming
Power ON/OFF sequence timing
Value
Parameter
Units
Min. Typ. Max.
T1 0.5 -- 10 [ms]
T2 30 40 50 [ms]
T3 200 -- -- [ms]
T4 0.5 -- 10 [ms]
T5 10 -- -- [ms]
T6 10 -- -- [ms]
T7 0 -- -- [ms]
T8 10 -- -- [ms]
T9 -- -- 10 [ms]
T10 110 -- -- [ms]
T11 0 16 50 [ms]
T12 -- -- 10 [ms]
T13 1000 -- -- [ms]
The above on/off sequence should be applied to avoid abnormal function in the display. Please make sure to turn off the
power when you plug the cable into the input connector or pull the cable out of the connector.
document version 0.3
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
18
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
G240HW01 V0
AU OPTRONICS CORPORATION
7. Connector & Pin Assignment
Physical interface is described as for the connector on module. These connectors are capable of accommodating the
following signals and will be following components.
7.1 TFT LCD Module: LVDS Connector
Connector Name / Designation Interface Connector / Interface card
Manufacturer
Type Part Number
Mating Housing Part Number FI-X30HL (JAE) or compatible
Pin# Signal Name Pin# Signal Name
JAE or compatible
JAE (FI-XB30SRL-HF11) or equivalent.
1 RxOIN0- 2 RxOIN0+
3 RxOIN1- 4 RxOIN1+
5 RxOIN2- 6 RxOIN2+
7 GND 8 RxOCLKIN-
9 RxOCLKIN+ 10 RxOIN3-
11 RxOIN3+ 12 RxEIN0-
13 RxEIN0+ 14 GND
15 RxEIN1- 16 RxEIN1+
17 GND 18 RxEIN2-
19 RxEIN2+ 20 RxECLKIN-
21 RxECLKIN+ 22 RxEIN3-
23 RxEIN3+ 24 GND
25 NC 26 NC
27 VDD 28 VDD
29 VDD 30 VDD
document version 0.3
19
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
7.2 Backlight Unit: LED Connector
Connector Name / Designation LED Connector
Manufacturer Sin Sheng or compatible
Connector Model Number MS24049HJ
Mating Model Number 2404PS-2 or compatible
PIN # SIGNAL NAME DESCRIPTION
1 V12 Input voltage, 12V
2 V12 Input voltage, 12V
3 V12 Input voltage, 12V
4 --- NC
G240HW01 V0
5 GND Ground
6 GND Ground
7 GND Ground
8 BL_EN Back light enable, 5V
9 BL_DIM_P Back light dimming, 3.3V
document version 0.3
20
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
G240HW01 V0
AU OPTRONICS CORPORATION
8. Reliability Test
Environment test conditions are listed as following table.
Items Required Condition Note
@ A
D A E F GCH A A I
B
>
?
Temperature Humidity Bias (THB)
High Temperature Operation (HTO)
Low Temperature Operation (LTO)
High Temperature Storage (HTS)
=
>
?
=
>
?
=
>
?
=
Low Temperature Storage (LTS) Ta= -
Acceleration: 1.5 Grms
Vibration Test
(Non-operation)
Wave: Random
Frequency: 10 - 200 Hz
Duration: 30 Minutes each Axis (X, Y, Z)
C
@ A
@ A E F GCH A A I
B
C
A
H A A I
B
C
N A
H A A I
B
C
A
B
C
O
H A A I
J K L M
J K L M
J K L M
J K L M
J K L M
Acceleration: 50 G
Shock Test
(Non-operation)
Wave: Half-sine
Active Time: 20 ms
Direction: ±X, ±Y, ±Z (one time for each Axis)
Drop Test Height: 46 cm, package test
ABP
Thermal Shock Test (TST) -
O
30min, 6
On/Off Test On/10sec, Off/10sec, 30,000 cycles
ABP
30min, 100 cycles
1
Contact Discharge: ± 8KV, 150pF(330Ω ) 1sec,
15 points, 25 times/ point.
ESD (Electro Static Discharge)
2
Air Discharge: ± 15KV, 150pF(330Ω ) 1sec
15 points, 25 times/ point.
Altitude Test
Operation:10,000 ft
Non-Operation:30,000 ft
Note 1: The TFT-LCD module will not sustain damage after being subjected to 100 cycles of rapid temperature change.
A cycle of rapid temperature change consists of varying the temperature from -20к to 60к, and back again. Power is
not applied during the test. After temperature cycling, the unit is placed in normal room ambient for at least 4 hours before
power on.
Note2: According to EN61000-4-2, ESD class B: Some performance degradation allowed. No data lost Self-recoverable.
No hardware failures.
document version 0.3
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
21
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
9. Mechanical Characteristics
G240HW01 V0
document version 0.3
22
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
G240HW01 V0
AU OPTRONICS CORPORATION
document version 0.3
23
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
10. Label and Packaging
10.1 Shipping Label (on the rear side of TFT-LCD display)
10.2 Carton Package
Max capacity: 24 TFT-LCD module per carton ( 8 pcs * 1 layers)
Max weight: 21 kg per carton
Outside dimension of carton: 412 mmx 281mmx 650 mm
G240HW01 V0
G240HW01 V0
document version 0.3
24
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
11. Safety
11.1 Sharp Edge Requirements
There will be no sharp edges or comers on the display assembly that could cause injury.
11.2 Materials
11.2.1 Toxicity
There will be no carcinogenic materials used anywhere in the display module. If toxic materials are used,
they will be reviewed and approved by the responsible AUO toxicologist.
11.2.2 Flammability
All components including electrical components that do not meet the flammability grade UL94-V1 in the
module will complete the flammability rating exception approval process.
The printed circuit board will be made from material rated 94-V1 or better. The actual UL flammability
rating will be printed on the printed circuit board.
G240HW01 V0
11.3 Capacitors
If any polarized capacitors are used in the display assembly, provisions will be made to keep them from
being inserted backwards.
11.4 National Test Lab Requirement
The display module will satisfy all requirements for compliance to:
UL 1950, First Edition U.S.A. Information Technology Equipment
document version 0.3
25
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Loading...