AUO G190SVT01.0 Specification
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
Ϯ
Ϯ Preliminary Specification
Ϯ
Ϯ
G190SVT01.0
ϭϭϭϭʳʳʳʳ Final Specification
Module 19” Color TFT-LCD (Free Shape LCD) with Touch function
Model Name G190SVT01.0
Customer Date
Approved by D
ate
Checked &
Approved
Note:
This Specification is subject to change
without notice.
by
Date
Debbie Chiu 2012/1/12
Prepared by Date
Christine
Huang
General Display Business Division /
2012/1/12
AU
Optronics corporation
ocument version 1.0 1
d
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
G190SVT01.0
Contents
1. Operating Precautions...........................
2. General Description......................................................................................... 5
2.1 Display Characteristics ..........................................................................................................5
2.2 General Touch Specification .................................................................................................. 6
2.3 Optical Characteristics ...........................................................................................................6
3. Functional Block Diagram............................................................................. 10
4. Absolute Maximum Ratings
4.1 Absolute Ratings of TFT LCD Module ................................................................................. 11
4.2 Absolute Ratings of Environment ........................................................................................ 11
5. Electrical Characteristics
5.1 TFT LCD Module.................................................................................................................. 12
5.2 Backlight Unit .......................................................................................................................14
.......................................................................... 11
.............................................................................. 12
.......................................................... 4
5.3 Touch Panel..........................................................................................................................15
6. Signal Characteristic
6.1 Pixel Format Image..............................................................................................................19
6.2 Signal Description ................................................................................................................20
6.3 Touch Sensor Pin Assignment.............................................................................................21
6.4 The Input Data Format.........................................................................................................21
6.5 Interface Timing.................................................................................................................... 22
6.6 Power ON/OFF Sequence...................................................................................................23
7. Connector & Pin Assignment
7.1 TFT LCD Module: LVDS Connector ....................................................................................24
7.2 Backlight Unit: LED Connector............................................................................................ 25
8. Reliability Test
............................................................................................... 26
9. Mechanical Characteristics
10. Label and Packaging
10.1 Definition of Label ..............................................................................................................29
10.2 Packaging Method .............................................................................................................30
10.3 Pallet and Shipment Information .......................................................................................31
..................................................................................... 19
........................................................................ 24
........................................................................... 27
................................................................................... 29
11. Safety............................................................................................................ 32
11.1 Sharp Edge Requirements ................................................................................................32
11.2 Materials .............................................................................................................................32
11.3 Capacitors ..........................................................................................................................32
11.4 National Test Lab Requirement .........................................................................................32
ocument version 1.0 2
d
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
ersion and
V
Date
0.1 201
1/11/15
Page Old description New Description Remark
All First Edition for Customer All
Product Specification
AU OPTRONICS CORPORATION
Record of Revision
G190SVT01.0
ocument version 1.0 3
d
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
G190SVT01.0
AU OPTRONICS CORPORATION
1. Operating Precautions
Since front polarizer is easily damaged, pay attention not to scratch it.
1)
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure human earth when handling.
7) Do not open or modify the Module Assembly.
8) In case if a Module has to be put back into the packing container slot after once it was taken out from the
container, take it easily, or the TFT Module may be damaged.
9) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the Interface
Connector of the TFT Module.
10) After installation of the TFT Module into an enclosure, do not twist nor bend the TFT Module even momentary.
At designing the enclosure, it should be taken into consideration that no bending/twisting forces are applied to
the TFT Module from outside. Otherwise the TFT Module may be damaged.
11) Small amount of materials having no flammability grade is used in the LCD module. The LCD module should
be supplied by power complied with requirements of Limited Power Source (IEC60950 or UL1950), or be
applied exemption.
12) Severe temperature condition may result in different luminance, response time and LED life time.
13) The data on this specification sheet is applicable when LCD module is placed in landscape position.
14) Continuous displaying fixed pattern may induce image sticking. It is recommended to use screen saver or
shuffle content periodically if fixed pattern is displayed on the screen.
ocument version 1.0 4
d
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
G190SVT01.0
AU OPTRONICS CORPORATION
2. General Description
This specification applies to the 19 inch-wide Color TFT-LCD Module G190SVT01.0.
The display supports the 1680(H) x 342(V) screen format and 16.7M colors. All input signals are 2 Channels LVDS
interface compatible.
LED driver board is included.
G190SVT01.0 is designed for industrial display applications.
2.1 Display Characteristics
The following items are characteristics summary on the table under 25
Items Unit Specifications
Screen Diagonal [inch]
Active Area [mm]
19
473.76 (H) x 96.44(V)
Pixels H x V 1680x3(RGB) x 342
condition:
Pixel Pitch [mm]
0.282x 0.282
Pixel Arrangement R.G.B. Vertical Stripe
Display Mode P-MVA Mode,Normally Black
Nominal Input Voltage VDD [Volt]
Typical Power Consumption [Watt]
Weight [Grams]
Physical Size [mm]
+5.0 V
18W (Base Panel)+400mW(Touch Panel)
=18.4W
1100 (Base Panel)+ 380(TP)=1480
497.7(W) x 126.8(H) x 21.66(D) (Max.)
Electrical Interface Dual Channel LVDS
Surface Treatment Anti-glare, Hardness 7H
Support Color 16.7M colors (6-bits + HiFRC)
Temperature Range
Operating
Storage (Non-Operating)
oHS Compliance RoHS Compliance
R
o
C]
[
o
C]
[
0 to +50
-20 to +60
ocument version 1.0 5
d
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
(
U
U
www.panelook.com
Product Specification
G190SVT01.0
AU OPTRONICS CORPORATION
2.2 General Touch Specification
Items Unit Specifications
Detection Method Projective Capacitive
Touch Glass type G/G
Sensor Glass Dimension mm
Cover lens outline dimension mm
Black ink open area mm
Touch Active Area mm
Capacitive Sense pad size mm
The smallest distance between 2 points mm
Interface Micro USB
491.7 x 122.8 x 0.5
497.7 x 126.8 x 1.8
475.56 x 98.24
476.76 x 99.44
9.17 (W) x 9.04 (H)
25
IC Driver
Channel
Light Transmission %
Haze %
Touch Panel Strength mpa
Operation System
RM31080(AUO-T402-3C)
52X11
85%(min), 88%(Typ.)
5~10
400(TBD)
Windows 7,Windows XP, Win CE, Anroid, Linux
see note 1
Touch Points Points
10
<Note 1>
G190SVT01.0 is compatible with Windows 7 with no additional software.
Remember not all applications are multi-touch ready. Multi-touch behavior is a function of Your application. Check your
application vendor to determine if your software has multi-touch capability(you may refer to the User guide for software
development)
2.3 Optical Characteristics
The optical characteristics are measured under stable conditions at 25 (Room Temperature):
Item Unit
White Luminance
Uniformity
Contrast Ratio
ocument version 1.0 6
d
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
[cd/m2]
%
Conditions Min. Typ. Max. Note
210 260 - 1
75
80 - 1, 2, 3
9 Points
= 80mA
I
F
1600 2000 - 4
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Cross talk
%
Response Time [msec]
[degree]
[degree]
Viewing Angle
[degree]
[degree]
Color / Chromaticity
Coordinates
(CIE 1931)
Color Gamut %
Product Specification
G190SVT01.0
AU OPTRONICS CORPORATION
- - 1.5 5
Rising - 15
Falling -
Rising + Falling -
Gray to Gray -
Horizontal (Right)
= 10 (Left)
CR
75
75
5 -
20 -
8 -
89
89
-
6
-
7
Vertical (Upper)
= 10 (Lower)
CR
Red x
Red y
Green x
Green y
Blue x
Blue y
White x
White y
75
75
TBD TBD
TBD TBD
TBD TBD
TBD TBD
TBD TBD
TBD TBD
0.252 0.302
0.263 0.313
- 68
89
89
-
-
TBD
TBD
TBD
TBD
TBD
TBD
0.352
0.363
-
Note 1: Measurement method
Equipment Pattern Generator, Power Supply, Digital Voltmeter, Luminance meter (SR_3 or equivalent)
Aperture
Point Center
Test
Environment < 1 lux
LCD Module
SR_3 or
equivalent
Measuring distance
Module Driving Equipment
ocument version 1.0 7
d
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
(CR)
g
g
A
A
www.panelook.com
Product Specification
G190SVT01.0
AU OPTRONICS CORPORATION
90 %
50 %
10 %
10 %
Note 2: Definition of 9 points position (Display active area)
50 %
90 %
Note 3: The luminance uniformity of 9 points is defined by dividing the minimum luminance values by the maximum test
point luminance
Minimum
Ӭ
W9
=
Maximum
Brightness of nine points
Brightness of nine points
Note 4Κ Definition of contrast ratio (CR):
Bri
Contrast ratio
=
htness on the “White” state
Bri
htness on the “Black” state
Note 5Κ Definition of cross talk (CT)
CT = | YB – YA | / YA × 100 (%)
Where
YA = Luminance of measured location without gray level 255 pattern (cd/m2)
YB = Luminance of measured location with gray level 255 pattern (cd/m2)
127 gray level
1/2
1/6
1/2
2/3 1/3
1/6
1/6
’
1/6
1/3
1/2
B
B’
1/2
2/3
127 gray level
255 gray level
ocument version 1.0 8
d
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
an
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
%
Tf Tr
Tr
Note 6: Definition of response time:
The output signals of photo detector are measured when the input signals are changed from “White” to “Black” (falling
time) and from “Black” to “White” (rising time), respectively. The response time interval is between 10% and 90% of
amplitudes. Please refer to the figure as below.
G190SVT01.0
100
90
90
Optical
ical
Opt
response
response
10
10
0
0
ite Black White
ite Black White
Wh
Wh
Note 7: Definition of viewing angle
range (off-normal viewing angles). The 180° viewing angle range is broken down as below: 90° (θ) horizontal
and 90° (Φ) vertical high (up) and low (down). The measurement direction is typically perpendicular to the display surface
with the screen rotated to its center to develop the desired measurement viewing angle.
left and right,
ocument version 1.0 9
d
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
R
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
3. Functional Block Diagram
The following diagram shows the functional block of the 19 inches wide Color TFT-LCD Module:
+5V
LVDS
LVDS Connector: JAE (FI-XB30SRL-HF11) or equivalent.
LED Connector: SIN SHENG (MS24049HJ) or equivalent.
Converter
Connector
DC/DC
LVDS
Receiver
I/F + X-PCB
Gamma
Correction
Timing
Controller
DC POWE
LED driver board
D1 D5040
G1
-
G342
-
TFT-LCD
1680*(3)*342
Pixels
G190SVT01.0
40 LEDs
ocument version 1.0 10
d
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Loading...