Aukey HD-C48 User Manual

User Manual

Car Phone Mount

Contents

English 01 ~ 05

Deutsch 06 ~ 11

Français 12 ~ 17

Español 18 ~ 23

Italiano 24 ~ 29

Thank you for purchasing the AUKEY HD-C48 Car Phone Mount. Please read this
user manual carefully and keep it for future reference. If you need any
assistance, please contact our support team with your product model number
and Amazon order number.

Package Contents

Car Phone Mount
User Manual
Warranty Card

- 01

Product Diagram

Phone Cradle

Phone Rest

- 02 -

Pivot Locking Nut

Ball Joint

Grip Release Knob

Air Vent Mounting Grip

Phone Cradle
Release Button

Specifications

Model
Maximum Load Capacity
Phone Cradle Adjustment Range
Materials
Dimensions
Weight

HD-C48
500g / 17.64oz
48–94mm / 1.9”–3.7”
ABS, POM
105 x 60 x 95mm / 4.13” x 2.36” x 3.74”
170g / 6oz

Getting Started

1.

Unscrew the pivot locking nut until you can push the ball joint into the back
of the mount; then tighten the nut (not too tight, so it will be easier to adjust
the angle of the mount later)
Flip up the grip release knob and turn counter-clockwise to expand the air

2.
vent mounting grip and clip the mount on your car’s air vent

- 03 -

3.

Turn the grip release knob clockwise to tighten and flip the knob down so
the mounting grip securely locks onto your air vent

4.

Pivot the mount so it faces you directly when seated in the car. Fully tighten
the pivot locking nut while holding the mount
Press and hold the phone cradle release button until you can place your

5.
phone on the mount
Adjust the phone cradle so it grips your phone securely

6.

Product Care & Use

●

Works with standard vertical or horizontal car air vents

●

If you can’t flip the grip release knob down to lock, you may have
over-tightened it. Turn counter-clockwise to expand the mounting grip
slightly before flipping the knob down to lock
Keep away from children. The small parts pose a choking hazard if swallowed

●

- 04 -

Keep away from liquids, extreme heat, and strong magnetic fields●

Warranty & Customer Support

For questions, support, or warranty claims, please contact us at the address
below that corresponds with your region. Please include your Amazon order
number and product model number.

Amazon US orders: [e-mail]
Amazon EU orders: [e-mail]
Amazon CA orders: [e-mail]
Amazon AU orders: [e-mail]
Amazon JP orders: [e-mail]

* Please note, AUKEY can only provide after sales service for products purchased directly from AUKEY. If
you have purchased from a different seller, please contact them directly for service or warranty issues.

- 05 -

Vielen Dank für Ihren Kauf von. Bitte lesen Sie diese Bedienungsanleitung
sorgfältig durch und bewahren Sie sie zum späteren Nachschlagen auf. Wenn
Sie Hilfe benötigen, wenden Sie sich bitte an unser Support-Team mit Ihrer
Produkt-Modellnummer und Amazon-Bestellnummer.

Lieferumfang

Kfz-Smartphone-Halterung
Bedienungsanleitung
Garantiekarte

- 06 -

Produktbild

Handyhalterung

Handyauflage

- 07 -

Drehsicherungsmutter

Kugelgelenk

Ver-/Entriegelungshebel

Befestigung an
Lüftungsschlitzen

Verriegelungstaste für
die Handyhalterung

Technische Daten

Modell
Maximale Tragfähigkeit
Anpassungsbereich der Handyhalterung
Materialien
Abmessungen
Gewicht

HD-C48
500 g
48 - 94 mm
ABS, POM
105 x 60 x 95 mm
170 g

Erste Schritte

1.

Schrauben Sie die Gegenmutter so weit auf, dass Sie das Kugelgelenk in die
Rückseite der Halterung drücken können; schrauben Sie die Mutter dann
fest (nicht zu fest, damit später der Neigungswinkel der Halterung leichter
eingestellt werden kann)

- 08 -