APTTGO-VSM | VSM 4 Hole AMPS Adapter Mount for TomTom® GO™ Series
Package Contents:
(1) APTTGO - Adapter plate for TomTom GO pattern
(1) AP032 - Dual-T to 4-hole AMPS adapter plate with screws and nuts
Compatible with:
• TomTom GO 520, 530, 720, 730, 920, 920P, and 930 models
!
Do not place mount in or near an air bag deployment zone.
AP032
Dual-T to 4-hole
AMPS Adpter plate
Patent Pending
APTTGO
Adapter Plate for
TomTo m GO
Console Mounting VSM Bracket
Step 1.
Find a safe location on the console to install the vehicle
speci c mount (VSM) sold by other manufacturers. The VSM
bracket is not included in this kit. Follow the manufacturers
instructions for installing VSM bracket.
Connect Adapter plate to VSM Bracket
Step 1.
Place the Dual-T to 4-hole AMPS adapter plate against the
VSM bracket. Using a screwdriver, tighten the screws into
the nuts behind the adapter plate. See diagram below.
Connect Adapter Plate to TomTom Device
Slide the adapter plate up into the grooves on the back of the
TomTom GO series device (not included, sold separately).
Connect TomTom Device to Pedestal
Step 1.
Connect the dual T-slots (A) on TomTom adapter plate to the
dual T-tabs (B) on the dual-T to 4-hole AMPS adapter plate.
TomTom brand name and pr oduct names are tr ademarks, or r egistered tra demarks of TomTom
Internat ional BV. Arkon Resour ces, Inc. is not a liated with TomTom Internatio nal BV.
Safety Precautions
!
Do not install Arkon products over an air bag cover or within the air
bag deployment zone. Arkon Resources, Inc. assumes no responsibility of liability for injury or death as a result of car crashes and / or
air bag deployment.
Arkon is not responsible for any damages caused to your car, your
device, or yourself due to the installation or use of this pedestal mount.
A
The Mobile Mounting Specialists™
Consumer Hotline:
USA (800) 841-0884
INT’L (626) 254-9005
Monday - Friday 9 am - 5 pm, PST
B
www.arkon.com
Arcadia, CA 91006 USA
Designed in USA | Made in China and Taiwan
© Copyright 2008 Arkon Resources, Inc.