Audio Technica ATH-M50xBT2 User Manual

ATH-M50xBT2
Wireless Headphones
User Manual
English

Safety precautions

Although this product was designed to be used safely, failing to use it correctly may result in an accident. To ensure safety, observe all warnings and cautions while using the product.
Do not use the product near medical equipment. Radio waves may affect cardiac pacemakers and medical electronic equipment. Do not use the product inside medical facilities.
When using the product in aircraft, follow airline instructions.
Do not use the product near automatic control devices such as automatic doors and fire alarms. Radio waves may affect electronic equipment and cause accidents due to malfunction.
Do not disassemble, modify or attempt to repair the product to avoid electric shock, malfunction or fire.
Do not subject the product to strong impact to avoid electric shock, malfunction or fire.
Do not handle the product with wet hands to avoid electric shock or injury.
Disconnect the product from a device if the product begins to malfunction, producing smoke, odor, heat, unwanted noise or showing other signs of damage. In such a case, contact your local Audio-Technica dealer.
Do not allow the product to get wet to avoid electric shock or malfunction.
Do not put foreign matter such as combustible materials, metal, or liquid in the product.
Do not cover the product with a cloth to avoid fire or injury by overheating.
Follow applicable laws regarding mobile phone and headphone use if using headphones while driving.
Do not use the product in places where the inability to hear ambient sound presents a serious risk (such as at railroad crossings, train stations, and construction sites).
When charging, make sure to use the included USB charging cable.
Do not charge with devices that have quick-charge functionality (with a voltage of 5 V or more). Doing so may cause the product to malfunction.
To prevent damage to your hearing, do not raise the volume too high. Listening to loud sound for an extended period may cause temporary or permanent hearing loss.
Discontinue use if skin irritation results from direct contact with the product.
Do not catch your fingers or other body parts between the housing and the arm or inside the joints.

Cautions for rechargeable battery

The product is equipped with a rechargeable battery (lithium polymer battery).
If battery fluid gets into eyes, do not rub them. Rinse thoroughly with clean water such as tap water and consult a doctor immediately.
If battery fluid leaks, do not touch fluid with bare hands. If fluid remains inside the product, it may cause malfunction. If battery fluid leaks, contact your local Audio-Technica dealer.
If fluid gets in your mouth, gargle thoroughly with clean water such as tap water and consult a doctor immediately.
If your skin or clothing comes in contact with fluid, immediately wash the affected skin or clothing with water. If you experience skin irritation, consult a doctor.
1
Safety precautions
To avoid leakage, generation of heat or explosion:
Never heat, disassemble or modify the battery, nor dispose of it in a fire.
Do not attempt to pierce with a nail, hit with a hammer or step on the battery.
Do not drop the product or subject it to strong impact.
Do not get the battery wet.
Do not use, leave or store the battery in the following places:
Area exposed to direct sunlight or high temperatures and humidity
Inside of a car under the blazing sun
Near heat sources such as heat registers
Charge only with the included USB cable to avoid malfunction or fire.
The internal rechargeable battery of this product cannot be replaced by the user. The battery may have reached the end of its service life if the usage time becomes significantly shorter even after the battery has been fully charged. If this is the case, the battery needs to be repaired. Contact your local Audio-Technica dealer for repair details.
When the product is disposed of, the built-in rechargeable battery needs to be discarded properly. Contact your local Audio-Technica dealer to learn how to properly dispose of the battery.

For customers in the USA

FCC Notice

Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Caution
You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter used in other systems.
2
Safety precautions
RF Exposure Statement
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of RF energy that is deemed to comply without testing of specific absorption rate (SAR).
Contact
Responsible Company: Audio-Technica U.S., Inc. Address: 1221 Commerce Drive, Stow, Ohio 44224, USA Tel: 330-686-2600

For customers in Canada

ISED statement

CAN ICES-3 (B)/NMB-3(B)
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
This device complies with RSS-102 radiation exposure limits set forth for an uncontrolled environment.
3

Notes on use

Be sure to read the connected device’s user manual before use.
Audio-Technica will not be liable in any way for any loss of data in the unlikely event that such losses should occur while using the product.
On public transportation or in other public places, keep the volume low so as not to disturb other people.
Minimize the volume on your device before connecting the product.
When using the product in a dry environment, you may feel a tingling sensation in your ears. This is caused by static electricity accumulated on your body, not by product malfunction.
Do not subject the product to strong impact.
Do not store the product in direct sunlight, near heating devices, or in hot, humid, or dusty places. Additionally, do not allow the product to get wet.
When the product is used for a long time, the product may become discolored due to ultraviolet light (especially direct sunlight) and wear.
If the product is placed in a bag while the USB charging cable is still connected, the USB charging cable may become caught, severed, or broken.
Make sure to hold the plug when connecting and disconnecting the USB charging cable. The USB charging cable may become severed or an accident may occur if you pull on the cable itself.
When you are not using the USB charging cable, disconnect it from the product.
Do not charge the battery if the terminal of the USB charging cable is bent, loose, or damaged. Doing so may cause heat generation, smoke emission, fire or electric shock.
This product can be used to talk on the phone only when using a mobile telephone network. Support for telephony apps that use a mobile data network is not guaranteed.
If you use the product near an electronic device or transmitter (such as a mobile phone), unwanted noise may be heard. In this case, move the product away from the electronic device or transmitter.
If you use the product near a TV or radio antenna, noise may be seen or heard in the television or radio signal. In this case, move the product away from the TV or radio antenna.
To protect the built-in rechargeable battery, charge it at least once every 6 months. If too much time passes between charges, the life of the rechargeable battery may be reduced, or the rechargeable battery may no longer be able to be charged.
Do not charge the product if water or foreign matter is inside the battery jack or USB charging cable. Doing so may cause corrosion, heat generation, smoke, fire, or other malfunction or electric shock in the battery jack or USB charging cable.
Charge the product in a well-ventilated place (10 to 35°C (50 to 95°F)) away from direct sunlight. Otherwise, the battery may deteriorate, possibly resulting in shorter periods of continuous use or may fail to charge.
If the product is wet with sweat, wipe off any moisture with a dry cloth before charging.
4
For a more comfortable Bluetooth communication
R L
1
1
experience
The effective communication range of this product varies depending on obstructions and radio wave conditions. For a more enjoyable experience, please use the product as close as possible to the Bluetooth device. To minimize noise and sound disruptions, avoid placing your body or other obstacles between the product’s antenna (L side) and the Bluetooth device.
Antenna
5

Part names and functions

4
5
7
6
2
1
3
8
1
2
3
4
5
6
7
8

Headphones

L/R (left/right) indicator
Earpad
Headband
Slider
Joint
Arm
Housing
Microphones
6
Part names and functions
2 3 4
1 6
5
1
2
3
4
5
6

Operation area

Battery jack
Use to connect the included USB charging cable and charge the product.
Indicator lamp
Displays the operating status and battery level of the product.
Connector jack
Use to connect the included cable for wired connection.
Power supply / control button
Use to turn the power supply ON/OFF, play/pause music, and answer phone calls.
Volume buttons
Use to adjust the volume up or down (+/–).
Voice assistant button
Depending on the connected device, activates the device’s speech recognition function (such as Siri for compatible iOS devices).
7
Part names and functions
2
1
3
1
2
3

Accessories

USB charging cable (30 cm (12"), USB Type-A / USB Type-C™)
Cable (1.2 m (3.9’) / 3.5 mm (1/8“) gold-plated stereo mini-plug/L-shaped)
Pouch
8

Charging the battery

1 2
1
2
Fully charge the battery when using for the first time. When the rechargeable battery is running low, the voice guidance will play the message “Low battery”, and the indicator lamp will flash in red. Charge the battery as soon as possible. It takes about 3.5 hours maximum to charge the battery fully. (This time may vary depending on usage conditions.) Charge the product in a well-ventilated place (10 to 35°C (50 to 95°F)) away from direct sunlight. Otherwise, the battery may deteriorate, possibly resulting in shorter periods of continuous use or may fail to charge.
Connect the included USB charging cable (USB Type-C side) to the battery jack.
1
The included USB charging cable is designed for exclusive use with the product. Do not use any other USB charging cable.
When inserting the USB charging cable into the USB port or battery jack, insert it directly (horizontally).
USB Type-A
USB Type-C
Connect the included USB charging cable (USB Type-A side) to the computer to start charging.
2
While charging, the indicator lamps light as follows. (It may take several seconds for the indicator lamps to light.)
Indicator lamp Status
Lit red Charging
Off Charging complete
Flashing red Charging error
[1] The headphones may be hot. Allow the temperature of the product to cool sufficiently before charging in a well-ventilated place (10 to 35°C
(50 to 95°F)) away from direct sunlight.
When charging is complete, disconnect the USB charging cable (USB Type-A side) from the
3
computer.
Disconnect the USB charging cable (USB Type-C side) from the product’s battery jack.
4
[1]
If you start to charge while the product is on, it will automatically turn off.
9
Charging the battery
When charging, make sure to use the included USB charging cable. The product may not charge with cables other than the included USB charging cable.
10

Power supply ON/OFF

Turning on the product

Press and hold the power supply/control button (about 2 seconds).
1
The indicator lamp lights in white, and then flashes. Voice guidance is played.
It may take several seconds for the indicator lamp to light.
See "Voice guidance" (p. 22) for more information on voice guidance.

Turning off the product

Press and hold the power supply/control button (about 2 seconds).
1
The indicator lamp lights in white, and then turns off.
11

Connecting via Bluetooth

Blue tooth
ON
ATH-M50xBT2
To connect the product to a Bluetooth device, the product needs to pair (register) with the device.

Pairing a Bluetooth device

Read the user manual for the Bluetooth device.
Place the Bluetooth device within 1 m (3.3') of the product to perform pairing correctly.
Wear the product to hear voice guidance during pairing.
Starting with the product turned off, turn it on.
1
The indicator lamp will light in white, and then flash.
Use your Bluetooth device to begin the pairing process and search for the product. When your
2
Bluetooth device finds the product, “ATH-M50xBT2” will be displayed on the device.
For information about using your Bluetooth device, refer to the device’s user manual.
Select “ATH-M50xBT2” to pair the product and your Bluetooth device.
3
Some devices may ask for a passkey. In this case, enter “0000”. The passkey may also be called a passcode, PIN code, PIN number, or password.
The voice guidance will play the message “Bluetooth connected”, and the indicator lamp will flash slowly in white. This indicates pairing was successfully completed.

Pairing with Fast Pair

In one touch, the product enables quick, effortless Bluetooth pairing with your Android™devices. You can even check to see where you last placed it.
12
Connecting via Bluetooth
Turn on the Bluetooth function on an Android device configured with a Google account.
1
Turn on the product and bring the product close to the Android device.
2
For information about using your Bluetooth device, refer to the device’s user manual.
Touch the pairing notification that appears on your Android device.
3
The voice guidance will play the message “Bluetooth connected”, and the indicator lamp will flash slowly in white. This indicates pairing was successfully completed.

About pairing

When connecting a new Bluetooth device, you need to pair it with the product. Once the Bluetooth device and the product are paired, you do not need to pair them again. The product supports multipairing, in which a connection history is saved. However, in the following cases you will need to pair again even if the Bluetooth device was paired once:
If the product is deleted from the Bluetooth device’s connection history.
If the product is sent out for repair.
If the product is reset.

Multipoint function

The product supports multipoint, which allows two Bluetooth devices to be connected at the same time. While you are listening to music with one device, you can answer a call that comes in from the other device. It is convenient if you have two smartphones, for example.
Audio-Technica does not guarantee the operation of all combinations of Bluetooth devices.

Connecting using multipoint

Pair with the first Bluetooth device.
1
After pairing with the first device, turn off its Bluetooth feature.
2
Pair with the second Bluetooth device.
3
Turn on the Bluetooth feature of the first Bluetooth device.
4
If the product does not connect, restart its power.
Up to two Bluetooth devices can be connected at the same time with multipoint. To connect a third Bluetooth device, disconnect one of the connected devices.
13

Wearing the product

1 1
1
Put the side of the product marked “L” (LEFT) onto the left ear and the side marked “R” (RIGHT) onto the right ear, slide the slider up and down so that the earpads cover the ears, and then adjust the headband.

Reversing the housing

You can turn the housing about 180 degrees from the point where the arm is attached to the fulcrum. Do not apply excessive force because it does not rotate more than about 180 degrees.

Swivel mechanism

You can fold the housing so that it lies flat.
The swivel mechanism cannot rotate more than 90 degrees. Do not apply excessive force.
Joint
14
Wearing the product
1
1

Compact folding

You can fold the housing into the inner side of the headband using the joints at the fulcrum.
Be careful so as not to get your fingers caught in the joints.
When using the product, make sure to return the housings to their original positions.
Joint
15

Using the product

1
1
The product can use Bluetooth wireless technology to connect to your device and play music, receive phone calls, etc. Use the product for whichever of these purposes suits your needs. Note that Audio-Technica cannot guarantee the operation of displays, such as the battery level display, or applications via Bluetooth devices.

Listening to music

To connect for the first time, pair the product and your device via Bluetooth wireless technology. If you have already paired the product and your Bluetooth device, turn on the Bluetooth device’s Bluetooth connection before turning on the product. Use your Bluetooth device to start playback, referring to the device’s user manual as necessary.
Turn on the product and place the product on your ears.
1
Start playback on your Bluetooth device.
2
Adjust the volume by pressing the volume buttons (+/–).
3
Press the power supply / control button to stop playback.
4
Playback will be started or stopped with every press.

Operation of power supply / control button

Power supply / control button
Operation Function
Press Starts or pauses playback.
The controls explained above may not be available on some smartphones.
16
Using the product
1
1

Operation of volume buttons

Volume buttons
Operation Function
Press Increases/decreases the volume by 1 level.
[1][2]
Press and hold (about 2 seconds)
[1] A beep is heard when the volume is at the maximum or minimum level.
[2] The volume control of some Bluetooth devices may not work well with the product.
The controls explained above may not be available on some smartphones.
Plays the next track. Plays the previous track / returns to the start of the track.

Talking on the phone

If your Bluetooth device supports telephone features, you can use the product to talk on the phone.
Turn on the product and place the product on your ears.
1
Make/receive calls with your Bluetooth device.
2
When your Bluetooth device receives a phone call, the product sounds a ringtone.
If a call is received while you are listening to music, music playback is paused.
Adjust the volume by pressing the volume buttons (+/–).
3
Press the power supply / control button to end the call.
4
If the call was received while listening to music, playback is resumed.
Music playback may not be resumed on some Bluetooth devices. In this case, music playback must be started manually.
17
Using the product
1
1
1
1

Operation of power supply / control button

Power supply / control button
Operation Function
Receiving a call: Answers the call.
Press
Making a call: Cancels the call. During a call: Ends the call.
Press and hold (about 2 seconds) Receiving a call: Rejects the call.
The controls explained above may not be available on some smartphones.

Operation of volume buttons

Volume buttons
Operation Function
Press Increases/decreases the call volume by 1 level.
The controls explained above may not be available on some smartphones.

Speech recognition feature

Activation of the speech recognition feature (such as Google Assistant or Siri) may be possible depending on your device.
Press the voice assistant button.
1
18
Using the product
2
3 4
1
1
2
3
4
The speech recognition feature (such as Google Assistant or Siri) is activated.

Wired connection (playthrough function)

The product has a playthrough function that allows you to use it as portable headphones and play back music even when there is no battery power. You can connect the connector plug of the included cable to the product’s connector jack, and then connect the input plug into a portable audio player.
The buttons on the product are not operational when using a wired connection.
The cable does not have a microphone, so the product will not pick up your voice when using a wired connection.
Smartphone, portable audio player, etc.
Input plug
Connector plug
Connector jack

Auto power off function

The product automatically turns off after 5 minutes of not being connected to a device.

App for smartphones

This product is compatible with our "CONNECT" app. The app gives you convenient access to various functions. It also allows you to update the product's firmware.
https://app.at-globalsupport.com
19
Using the product

What you can do with the app

The app allows you to use the following functions. For details, refer to the app screen.
Function Description.
Audio Codecs You can change the connection codec.
Low Latency Mode
Equalizer You can adjust the equalizer settings.
L/R Balance Adjustment You can adjust the left-right volume balance.
Voice Assistant You can set what to activate with the voice assistant button.
Side Tone
Guide Sounds The product's voice guidance can be changed to a confirmation tone.
Low latency mode reduces sound delay when playing games or watching videos.
You can turn on or off the side tone function that captures your own voice and ambient sounds through the microphone during a call (the function is on at the time of purchase).
20

Indicator lamp display

○-○-○・・・
○--------○--------○・・・
○----○----○・・・
--・・・
The indicator lamp of the product indicates the product’s status.

Pairing

Status Indicator lamp display pattern
Searching for devices
Flashing white (gradually lighting up)

Connecting

Status Indicator lamp display pattern
Waiting to be connected
Connecting
Flashing white in 8-second intervals
Flashing in 4-second intervals

Battery level

Status Indicator lamp display pattern
Battery level is low White in the pairing or connection status turns red.

Charging

Status Indicator lamp display pattern
Charging
Fully charged
Charging error
Lit red
Off
Flashing red
21

Voice guidance

The product plays English voice guidance in the following situations.
Situation Voice guidance
Voice guidance varies depending on the battery level:
Power is turned on
Bluetooth is connected Bluetooth connected
Bluetooth is disconnected Bluetooth disconnected
Music is played Play
Music is paused Pause
Battery level is low Low battery
No power due to dead battery Please recharge
Battery level high Battery level medium Battery level low
22

Cleaning

Get into the habit of regularly cleaning the product to ensure that it will last for a long time. Do not use alcohol, paint thinners, or other solvents for cleaning purposes.
Use a dry cloth to clean the headphones.
To clean the earpads and headband, wipe with a dry cloth. Earpads and headband may fade if sweat or water dries on them. If the earpads and headband get wet, we recommend wiping them with a dry cloth and allowing them to dry in the shade.
Immediately wipe off any moisture such as sweat from operating areas such as the buttons. Failure to do so may result in a malfunction due to corrosion.
Wipe away any perspiration or dirt from the cable with a dry cloth immediately after use. Failure to clean the cable may cause it to deteriorate and harden over time, resulting in malfunction.
Wipe the cable’s USB plug with a dry cloth if dirty.
Wipe the cable plug with a dry cloth if dirty. Using the plug without cleaning it can cause sound skipping or distortion.
If the product will not be used for an extended period of time, store it in a well-ventilated place free from high temperatures and humidity.
Earpads are consumable parts. The earpads deteriorate over time due to use or storage. Contact your local Audio-Technica dealer for earpad replacement or other repairs.
23

Forced pairing mode / reset

If the product does not connect to a device (forced pairing mode)

If pairing cannot be cancelled or is not successful, you can use forced pairing mode to perform pairing again.
With the product turned on, press and hold (about 3 seconds) the volume buttons (+/–) at the same
1
time.
The product will switch to the “searching for devices” (pairing mode) state and you will be able to pair with your desired Bluetooth device.

If the product operates abnormally (reset)

Reset the product.
With the product turned on and not connected with a Bluetooth device, press and hold (about 6
1
seconds) the power supply / control button and volume buttons (+/-) at the same time.
After the indicator lamp lights in red, the product will restart, and the reset will be complete.
Remove the product from the list of registered devices on your Bluetooth device.
2
Pair the product again.
3
24

Troubleshooting

Power is not supplied
Charge the product.
Unable to pair
Confirm that the Bluetooth device communicates using Ver. 2.1+EDR or higher.
Place the product and the Bluetooth device within 1 m (3.3') of each other.
Set the profiles for the Bluetooth device. For procedures on how to set profiles, refer to the Bluetooth device’s user manual.
Remove the pairing information for the Bluetooth device then pair the product with this device again.
Make sure you are not connected to any other previously connected Bluetooth device. If you are, disconnect the product using the previously connected Bluetooth device, and then select the product on the Bluetooth device you wish to connect to. Use forced pairing mode if you are unable to disconnect from a previously connected Bluetooth device. For details, refer to "If the product does not connect to a device (forced pairing mode)" (p. 24).
Reset the product if it cannot be unpaired or connected, or does not operate as expected even after trying all other solutions. For details, refer to "If the product operates abnormally (reset)" (p. 24).
No sound is heard / Sound is faint
Turn on the power of the product and the Bluetooth device.
Turn up the volume on the product and the Bluetooth device.
Make sure that the product and Bluetooth device are connected by the A2DP (or audio connection).
Disable pairing for the product and the Bluetooth device, then pair the product with this device again.
Move away from obstacles between the product and the Bluetooth device, such as people, metal, or walls, and place the product and device closer together.
Switch the sound output of the Bluetooth device to the product.
Sound is distorted / Noise is heard / Sound cuts out
Turn down the volume on the product and the Bluetooth device.
Keep the product away from devices that emit radio waves such as microwaves and wireless routers.
Keep the product away from TVs, radios, and devices with built-in tuners. These devices can also be affected by the product.
Turn off the equalizer settings of the Bluetooth device.
Remove obstacles between the product and the Bluetooth device and place them closer together. For details, refer to "For a more comfortable Bluetooth communication experience" (p. 5).
25
Troubleshooting
Cannot hear the voice of the caller / Voice of the caller is too quiet
Turn on the power of the product and the Bluetooth device.
Turn up the volume on the product and the Bluetooth device.
Confirm that the product and Bluetooth device are connected via HFP/HSP (or phone connection).
Disable pairing for the product and the Bluetooth device, then pair the product with this device again.
Switch the sound output of the Bluetooth device to the product.
The product cannot be charged
Securely connect the included USB charging cable and charge the product.
Charge the product in a well-ventilated place (10 to 35°C (50 to 95°F)) away from direct sunlight.
For details about how to operate your Bluetooth device, refer to the device’s user manual.
26

Specifications

Headphones

Type
Driver
Sensitivity
Frequency response
Impedance
Closed-back dynamic
45 mm
99 dB/mW
15 to 28,000 Hz
38 ohms

Microphone

Type
Polar pattern
Sensitivity
Frequency response
MEMS type
Omnidirectional
-38 dB (1 V/Pa, at 1 kHz)
85 to 15,000 Hz

Communication specifications

Communication system
Bluetooth version 5.0
Maximum RF output
Maximum communication range
Frequency band
Modulation method
Spread spectrum method
Compatible Bluetooth profiles
Supported codec
Supported content protection method
Transmission band
5.1 mW EIRP
Line of sight - approx. 10 m (33')
2.402 GHz to 2.480 GHz
GFSK, Pi/4DQPSK, 8DPSK
FHSS
A2DP, AVRCP, HFP, HSP
LDAC, AAC, SBC
SCMS-T
20 to 40,000 Hz (when LDAC 96 kHz sampling, 990 kbps) 20 to 20,000 Hz (when 44.1 kHz sampling)
27
Specifications

Other

Power supply
Charging time
Operating time
Weight
Operating temperature
Accessories
Sold separately
[1] The figures above depend on operating conditions.
For product improvement, the product is subject to modification without notice.
DC 3.7 V lithium polymer battery
Approx. 3.5 hours
Continuous transmission time (music playback): Max. approx. 50 hours
Approx. 307 g (10.8 oz)
5°C to 40°C (41°F to 104°F)
USB charging cable (30 cm (12”), USB Type-A / USB Type-C), Cable (1.2 m (3.9’) /3.5 mm (1/8”) gold-plated stereo mini-plug (L-shaped)), Pouch
Earpad, Cable
[1]
[1]
28

Trademarks

The Bluetooth®word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Audio-Technica Corporation is under license. Other trademarks and trade names are those of their respective owners.
USB Type-C™is a trademark of USB Implementers Forum.
Siri is a trademark of Apple Inc., registered in the U.S. and other countries and regions.
Google and Android are trademarks of Google LLC.
29
株式会社オーディオテクニカ
〒194-8666 東京都町田市西成瀬2-46-1 www.audio-technica.co.jp
Audio-Technica Corporation
2-46-1 Nishi-naruse, Machida, Tokyo 194-8666, Japan www.audio-technica.com ©2021 Audio-Technica Corporation Global Support Contact: www.at-globalsupport.com
132417580-02-01 ver.1 2021.08.15
Loading...