AudioQuest HDMI-A User Manual

HDMI-A

VIDEO CABLE: HDMI

• Conductive-Coated Conductors

Conductive-Coated Conductors

WHY: Previous video standards (composite, “S”, component, RGB) transmit an analog signal. When two digi­tal devices are connected with HDMI or DVI, the digital signal stays clearer and noise-free.

Both the DVI-D and the more recent HDMI transmission standards come from the same “working group.” Both
systems transmit the same uncompressed digital video signal. The only two differences you must know: 1) the
connectors are different. 2) HDMI inputs and outputs are capable of digital audio; DVI-D is video only.

• Solid High-Density PE

• Critical Twist Geometry

HOW: AudioQuest/CinemaQuest HDMI-A uses large Conductive-Coated conductors. Solid High-Density
Polyethylene is used to minimize loss caused by insulation, and to insure critical geometry stability. This
HDMI-A cable has an HDMI connector on both ends. HDMI-A is also available also available with an HDMI
connector on one end and a DVI-D connectors on the other end.

HDMI-A is available in a braided jacket in lengths of 1M, 2M and 3M. HDMI-A is available in an off-white PVC
CL-3 rated jacket in various lengths from 4.5m to 12M. See picture below.

HDMI-A PVCADAPTERS