AudioLab 8200Q Service Manual
8200Q
VERSION HISTORY
Rev
V01
V02 2011.06.10
Date Update Content
2010.10.18
First Version
Second Version
8200Q
CONTENT
8200Q
1
.
Introduction
2
.
Specification
3
.
Assembly Sketch
4
.
Schematic Diagram
5
6
7
8
9
.
.
.
.
.
ia
Wir ng Di gram
screen of Bottom
Silk Top
Maintenance Alignment Procedure
Assembly Parts List
Electronic Parts List
/
1
2
3
4-15
16
17-20
21
22-23
24-29
INTRODUCTION
No part of this document may be reproduced or transmitted in any form or by any means,electronic or
mechanical, for any purpose, without the express written permission of International Audio Group
Limited (IAG)
This manual is for the exclusive use of IAG, its approved distributors and approved UK service agents.
No part of this manual shall be transferred to any other party without the express written permission of
IAG.
It is the responsibility of the user to ensure that all the information contained in this manual is current.
Notification for new issues of this manual and minor updates will be given via the IAG web-site or on
request.
This manual has been prepared with the greatest care, it is intended for information only and no liability
shall be accepted for errors or changes to specification.
For further service information, parts lists and updates, please contact our web-site at
www.international audio group.com .
C
2011 International Audio Group Limited. All rights reserved.
8200Q
1
SPECIFICATION
Inputs: Gain and Sensitivity
Signal To Noise Ratio (IHF,rel.0.5V
output)
Frequency Response
Total Harmonic Distortion&Noise
Channel Balance
Channel Separation
Pre-amp Output
Headphone Output
Record Output
Muting
Operating Temperature Range
Power Requirements(Depending on
Region)
CD, TUNER, AUX, VIDEO, TAPE 1, TAPE 2: IMPEDANCE: 20kΩ
GAIN: Adjustable by 3dB steps 0 -15dB., corresponding to
SENSITIVITY (nom.): 100mV, 140mV, 200mV, 283mV, 400mV,
562mV
HEADPHONES: Gain adjustable 18dB - 33dB in 3dB steps
Any input, any gain setting: 97dB
Headphones: 80 dB
10 Hz-20 kHz ±0.2 dB: 1Hz-75 kHz -3 dB
Less than 0.007%ref 7.7V rms, 20Hz - 20kHz
Within1dB
Better than100 dB@1 kHz any input, any setting
Max. Output >7.7 V RMS(20dBm); Output impedance 75Ω
>7.7Vrms;100 (for headphones 8 -2 k impedance)
VIDEO OUT, TAPE 1 OUT, TAPE 2 OUT:Gain 0 dB (x1); 100Ω
Attenuation>63 dB, controlled automatically
10-35 °C
50-60Hz 100V, 110-120V, and 220-230V models available
Dimensions (W×H×D)
Weight
Maximum Power Consumption: 25 VA
445×74×335mm- including feet, terminals and controls
445 ×64×302mm-excluding feet, terminals and controls
Net: 6 kg
Shipping: 7.3 kg
8200Q
2
ASSEMBLY SKETCH
8200Q
3
SCHEMATIC DIAGRAM
8200Q
4
SCHEMATIC DIAGRAM
8200Q-Mainboard-P2/10
8200Q
5
SCHEMATIC DIAGRAM
8200Q-Mainboard-P3/10
8200Q
6
SCHEMATIC DIAGRAM
8200Q-Mainboard-P4/10
8200Q
7
Loading...