International Audio Group
IAG house,
Sovereign Court,
Ermine Business Park
Huntingdon, PE29 6XU
8 0 0 0 S
Integrated Amplifier
Specification
audiolab
The original 8000 series from Audiolab left a legacy of revolutionary products, one of which being the legendary 8000A; a product which lead the way in simple but technically advanced stereo systems.
The 8000S has been designed as a powerful upgrade from the legendary 8000A. With this fine heritage behind it, the virtues of the system are many; not least of which is flexibility.
Able to operate in any one of five modes the 8000S is a more than worthy replacement for - and an essential addition to - any home with a passion for high quality audio.
The 8000S modes
Pre - |
Pre Amplifier, activates the pre-outs |
|
de-activates the internal power amp |
Mute - |
Mutes the output |
Integrated - |
Intgrated Amplifier |
Pre-Power - |
Activates the pre-outs allowing an |
|
additional power amp to be used for |
|
Bi-amping |
Pre-Power AV - Allows an AV processor direct access to the pre-out / power in sockets
Rated output power |
60 W per channel into rated load impedance (8Ω),95 W |
|
into 4Ω |
|
|
Typical output power |
72 W per channel into rated load impedance (8Ω), |
|
115 W into 4Ω |
|
|
Preamplifier input impedance |
20 kΩ nominal |
|
|
Preamplifier maximum output |
Greater than 7.76 V rms |
|
|
Power amplifier input impedance |
47 kΩ nominal |
|
|
Frequency response (-3 dB) |
1 Hz - 65 kHz |
|
|
Frequency response (±0.5dB) |
20 Hz - 20 kHz |
|
|
Channel separation |
Greater than 60 dB at 1 kHz |
|
|
Crosstalk rejection |
Greater than 80 dB at 1 kHz |
|
|
Operating temperature range |
10 - 35ºC |
|
|
Power consumption |
Less than 300 W Idle/Power |
Dimensions (WxHxD - mm) |
445 x 74 x 335 |