Audiolab 8000X7 User Manual

International Audio Group
IAG house,
Sovereign Court,
Ermine Business Park
Huntingdon, PE29 6XU

8 0 0 0 X 7

Power Amplifier

S p e c i f i c a t i o n

a u d i o l a b

The 8000X7 is a genuine one-box, seven
channel power amplifier, capable of handling
even difficult loudspeaker loads.

The 8000X7 home theatre power amplifier
delivers 7 x 100Wrms power. However, you
can also run it in five or six channel mode too.
By bridging two channels it is possible to
create a more powerful single channel ­especially useful if your front left and front
right speakers are more performance critical
than the other speakers in your 5.1 system.

“Unobtrusive, with an elegant

simplicity, the 8000X7 is a

compact yet powerful performer.”

Power output

IHF toneburst power

Input for rated power

Input impedance

Gain

Signal to noise

Frequency Response

Input connector

7 x 100W into rated load impedance (8 Ohm)
5 x 100W and 1 x 150W (8 Ohm)
3 x 100W and 2 x 150W (8 Ohm)

7 x 120W (8 Ohm)

1.05 Vrms

47 kOhm

+29 dB at 1 kHz

better than 90 dB (relative to 0 dBW) unweighted

1.5 Hz - 150 kHz (-3 dB)

RCA