Audiolab 8000M User Manual

International Audio Group
IAG house,
Sovereign Court,
Ermine Business Park
Huntingdon, PE29 6XU

8 0 0 0 M

Power Amplifier

S p e c i f i c a t i o n

a u d i o l a b

The 8000M provides a genuine 125W
power into an 8Ohm loudspeaker load,
and features twin output terminals for
bi-wiring.

It has parallel phono connectors making it
easy to connect several pairs of 8000Ms
to any pre-amplifier. This allows you to
daisy-chain units to further improve
headroom in bi-amped and even
tri-amped systems.

Simple styling belies the power and speed
of response available from this compact
amplifier

Rated output power

Typical output power

125 W per channel into rated load impedance (8Ω), 200 W into 4Ω

145 W per channel into rated load impedance (8Ω), 240 W into 4Ω

Input for full rated power

Input impedance

Gain

Signal to noise

Frequency response (-3 dB)

Frequency response (±0.3dB)

Total harmonic distortion + noise

Dimensions (WxHxD - mm)

1.13 V rms
47 kΩ nominal

29.0 dB at 1 kHz

Greater than 96 dB (relative to 0 dBW)

0.1 Hz - 75 kHz

20 Hz - 20 kHz

Less than 0.05%

445 x 74 x 337