Page 1
E08T
Illustrationsand
Screenshots
inThisManual
Noteson
CellPhoneUse
Contents
GettingReady
Makingand
AnsweringCalls
GlobalFunction
BasicManual
rea d thi s ma nua l to ma ste r
the cellular phone
CharacterInput
PhoneBook
PairFunction
Mail
Camera
EZweb
EZNewsEX
EZNavi
TV(1Seg)
InCaseof
LossofYourE08T
Troubleshooting
Index
Page 2
Introduction
Thank you for purchasing the E08T. Before using your E08T, be sure to read the E08T Basic Manual (this PDF manual) to
ensure correct usage. After you have finished reading this manual, store this PDF manual and the printed manuals in safe
places so you can retrieve them whenever you need them.
Manuals for the E08T
The E08T comes with the Basic Manual and Instruction Manual.
● For learning the basics:
Read the E08T Basic Manual (this manual).
● For learning details on using each function:
Read the supplied E08T Instruction Manual (Japanese). Be sure to read the Safety Precautions “安全上のご注意” to
ensure proper usage of the E08T.
The keyword searchable au Online Manual is also available on the au homepage:
http://www.au.kddi.com/manual/index.html
To access from EZweb: M⇒ au one
•
Scan this QR code to access the au Online Manual. ▶
オンラインマニュアル
Top ⇒
auお客さまサポート
(Online Manual)
(au Customer Support) ⇒
Page 3
Illustrations and Screenshots in This Manual
Note on Illustrations
■
The illustrations in this manual may look different from the actual cell phone in shape, color and typeface. The key
illustrations are also simplified as shown below.
Key Illustration Key Illustration
① K ⑧ O
⑫
⑫
⑥
⑥
⑦
①
①
②
②
③
③
④
④
⑤
⑤
■
Note on Screenshots
⑦
⑧
⑧
⑨
⑨
⑩
⑩
⑪
⑪
⑬
⑬
⑭
⑭
The screenshots in this manual are simplified and may look different from the actual cell phone screens.
② P ⑨ M
③ L ⑩ R
④ Q ⑪ S
123
⑤
456
789
⑫ T
*0;
⑥ [GF ⑬ U
⑦ J ⑭ N
Illustrations and Screenshots in This Manual
1
Page 4
Notes on Cell Phone Use
Cell Phone Etiquette
Notes on Cell Phone Use
The cell phone always emits weak radio waves when power
is on.
Use the cell phone in an enjoyable and safe manner without
forgetting to be considerate of others around you.
●
Use of cell phones is not allowed in some places.
•
Do not use the cell phone while you are driving. Doing
so is both dangerous and prohibited by law.
•
Using a cell phone in an aircraft is prohibited by law.
Set Airplane Mode to ON and turn the cell phone
power off.
●
Radio waves from cell phones may interfere with
medical electrical equipment.
•
Some people close to you in crowded places such
as packed trains may be using a cardiac pacemaker.
Turn the cell phone off in such places.
•
Abide by the rules of hospitals and other medical
institutions where it is forbidden to use or carry cell phones.
●
Be considerate of where you use the cell phone and
how loudly you talk.
•
Do not make calls in theaters, museums, libraries, and
other similar places. Turn power off or turn on manner
mode not to disturb others around you by ring tones.
•
Do not use the cell phone on a street where you might
interrupt the flow of pedestrians.
Move to areas where you will not inconvenience others
•
on trains or in hotel lobbies.
Refrain from talking in a loud voice.
•
2
Obtain the permission of other people before you take
•
their photos with the cell phone's camera.
Do not record information with the cell phone's camera
•
in bookstores and other locations where taking photos
is not permitted.
Do Not Use the Cell Phone While Driving!
Turn off your cell phone or put it in Drive Mode while
driving.
Do not use the cell phone while driving a car/motorcycle
or riding a bicycle. It may result in a traffic accident. Using
a cell phone while driving is prohibited by law. Using a
cell phone while riding a bicycle may also be punishable
by law.
Prohibited!
Looking at a cell phone display
•
Talking on a cell phone while holding it
•
Drive Mode
In Drive Mode, a Japanese message meaning "I'm
driving now, so I can't answer your call." is played
when a call is received, and asks the caller to leave a
message on the answer memo.
When the standby screen is displayed, press tT, use
gG to select Drive and then pr
ess {[ (Set).
Page 5
Disaster Message Board Service
When a large scale disaster occurs, you can register
your safety information from EZweb. The registered
information can be referred from anywhere in Japan from
EZweb or Internet.
When a large scale disaster occurs,
Registering
Registering
safety
safety
information
information
Inquiring
Inquiring
for safety
for safety
information
information
Access
•
from an au phone, you can register your
safety information (i.e. your condition
and comments) to the 災害用伝言板
(Disaster Message Board) created on
the EZweb.
After registration of your safety
•
information, e-mail is sent to your family
or acquaintances you have previously
designated to notify that your safety
information has been uploaded to
the 災害用伝言板 (Disaster Message
Board).
You can inquire for safety information
•
of a person by entering his/her phone
number from EZweb or Internet.*
* To inquire from other carriers' cell
phone, a PHS or PC, access
"http://dengon.ezweb.ne.jp/".
Top ⇒
M ⇒ au one
Message Board)
http://dengon.ezweb.ne.jp/
災害用伝言板
(Disaster
•
The maximum storage period of the registered
information is 72 hours.
•
The maximum available number of registrations is 10
per phone number. When the number of registrations
exceeds 10, the oldest one is overwritten.
The demonstration of this service can be referred to
•
anytime by pressing mM ⇒ au one
サポート
⇒
(Demo Version)).
•
To view the Disaster Message Board in English, select
English from the top menu of the Disaster Message
Board.
(au Customer Support) ⇒
災害用伝言板（デモ版）
Top ⇒
auお客さま
調べる
(Disaster Message Board
(Search )
Notes on Cell Phone Use
3
Page 6
Contents
Introduction
Illustrations and Screenshots in This Manual
Contents
Notes on Cell Phone Use 2
Cell Phone Etiquette …………………………………… 2
Do Not Use the Cell Phone While Driving! …………… 2
Disaster Message Board Service …………………… 3
Contents 4
Getting Ready 6
Checking the Contents of the Box …………………… 6
Names of Parts ………………………………………… 7
Charging the Battery Pack …………………………… 8
Learning the Basics …………………………………… 9
Turning On Power ……………………………………… 10
Switching the Display Language to English ………… 10
Initial Setup of E-mail and EZweb …………………… 10
Checking Your Phone Number and E-mail Address
Display Indicators ……………………………………… 11
Using Main Menu ……………………………………… 12
Changing Your E-mail Address ……………………… 13
Security Code and Passwords ………………………… 14
Making and Answering Calls 15
Making a Call …………………………………………… 15
Making an International Call …………………………… 15
Answering a Call ……………………………………… 16
4
1
…10
Returning a Call (Outgoing History/Incoming History
One-ring Calls …………………………………………… 16
Adjusting the Earpiece Volume during a Call ……… 17
Turning On Manner Mode ……………………………… 17
Changing the Incoming Ring Tone …………………… 17
Adjusting the Incoming Ring Tone Volume …………… 18
Turning On the Answer Memo ………………………… 18
) … 16
Global Function 20
Setting the Area ………………………………………… 20
Obtaining the Latest PRL (Preferred Roaming List) … 20
Calling Japan from Overseas ………………………… 21
Character Input 22
Character Entry Modes ………………………………… 22
Entering Alphanumeric Characters …………………… 22
Entering E-mail Addresses …………………………… 23
Entering Pictograms …………………………………… 24
Phone Book 25
Saving a Phone Book Entry …………………………… 25
Dialing from the Phone Book ………………………… 25
Editing Phone Book Entries …………………………… 25
Saving a Phone Number from the Incoming
or Outgoing History …………………………………… 26
Pair Function 27
Registering a Pair Partner …………………………… 27
Making a Call to a Pair Partner ……………………… 27
Sending Mail to a Pair Partner ………………………… 27
Page 7
Mail 28
Using E-mail …………………………………………… 28
Creating and Sending E-mail Messages …………… 28
Reading Received E-mail Messages ………………… 29
Reading an E-mail Message
with an Attached Photo or Movie ……………………… 29
Replying to Received E-mail Messages ……………… 29
Rejecting Spam ………………………………………… 30
Using C-mail …………………………………………… 31
Creating and Sending C-mail Messages …………… 31
Reading Received C-mail Messages ………………… 31
Camera 32
Photo Taking Tips ……………………………………… 32
About Photo Modes …………………………………… 32
Taking a Photo ………………………………………… 33
Viewing Photos ………………………………………… 33
EZweb 34
Accessing Sites ………………………………………… 35
Bookmarking Frequently Accessed Pages ………… 36
Viewing Bookmarked Pages …………………………… 36
Checking Charges ……………………………………… 37
Downloading Chaku-Uta-Full
EZ News EX
Basic Operations ……………………………………… 38
Setting EZ News EX …………………………………… 38
®
/Chaku-Uta® ………… 37
38
EZ Navi 40
Passenger Seat Navi for People
in the Passenger Seat to Check the Route ………… 40
Security Navi to Check Where Your Kids Are ……… 40
EZ Navi Walk for When You Go Out ………………… 41
Evacuate Navi to Guide You Home or to Nearby
Evacuation Areas during Disasters …………………… 42
TV (1Seg)
Initial Setup of au Media Tuner ………………………… 43
Watching TV (1Seg) …………………………………… 44
Basic Operations ……………………………………… 44
Exiting the au Media Tuner …………………………… 44
43
In Case of Loss of Your E08T 45
Setting Conditions for Activating the Remote Ctrl Lock ……
Remotely Activating the Remote Ctrl Lock on Your E08T
Activating the Remote Ctrl Lock
by the Security Lock Service ………………………… 46
45
…45
Troubleshooting 47
Index 49
Contents
5
Page 8
Getting Ready
Checking the Contents of the Box
The box contains the cell phone and accessories.
Cell phone• Battery pack• CD-ROM
Getting Ready
•
•
Instruction Manual (Japanese)
•
Warranty (Japanese)
•
Safety Precautions (Japanese)
•
Global Passport Owner’s Guide (Japanese)
•
Osaifu-Keitai
®
Guide (Japanese)
Purchase a specified AC adapter, microSD memory card, desktop holder, earphone conversion adapter, stereo
•
earphones or USB cable as required as they are not included in the box (sold separately).
6
Page 9
Names of Parts
au IC-Card*
* Do not remove this
card unnecessarily as
your phone number is
recorded on it.
Camera lamp
Mobile light
Camera (lens)
Built-in antenna
Battery pack/
Battery pack
cover
Power key/
End key
EZapps key/
Soft key 2
Quick key
Speaker
Sub-display
Built-in antenna
Charge
indicator
Incoming
LED
EZ key
Infrar
ed port
Power terminal
Memory card slot
Camera key
Side key 2
External connection jack
Earpiece
Side key 1
Hand strap eyelet
Phone book key/
Soft key 1
Customize key
Microphone
Clear key/
Memo key
Mail key
Send key/
Pair key
Keypad,
*
key,
;
key
Display
Lux Sensor
Warp function
key
au IC-Card*
* Do not remove this
card unnecessarily as
your phone number is
recorded on it.
Camera lamp
Mobile light
Camera (lens)
Built-in antenna
Battery pack/
Battery pack
cover
Power key/
End key
EZapps key/
Soft key 2
Quick key
Speaker
Sub-display
Built-in antenna
Charge
indicator
Incoming
LED
EZ key
Infrar
ed port
Power terminal
Memory card slot
Camera key
Side key 2
External connection jack
Earpiece
Side key 1
Hand strap eyelet
Phone book key/
Soft key 1
Customize key
Microphone
Clear key/
Memo key
Mail key
Send key/
Pair key
Keypad,
*
key,
;
key
Display
Lux Sensor
Warp function
key
Open Position■ Closed Position
■
From the Front
From the Sides
From the Back
Getting Ready
7
Page 10
Charging the Battery Pack
The battery pack is not fully charged at the time of purchase.
Be sure to charge the battery pack before using the cell
phone for the first time.
An AC adapter is not included. Purchase a specified AC
•
adapter (sold separately).
Getting Ready
➡
➡
➡
8
Charge indicator
Charge indicator
3
3
100 V AC
100 V AC
power outlet
power outlet
2
2
1
1
External
External
connection jack
connection jack
Connector
Connector
AC adapter
AC adapter
Connect a specified AC adapter to the cell
phone with the battery pack attached.
Open the cover of the external connection jack. Check
•
the shape of the connector of the AC adapter, and
plug it straight into the external connection jack.
Unfold the power plug of the AC adapter and
plug it into a 100 V AC power outlet.
Confirm that the charge indicator lights.
Charging: The charge indicator lights.
•
Charging finished: The charge indicator goes out.
•
•
Be sure to close the cover of the external connection
jack when charging is finished.
•
Do not pull or twist the cover of the external
connection jack forcibly.
Be sure to use the common AC adapter 02 (sold
•
separately) when charging overseas.
Page 11
Learning the Basics
Key Assignments
■
: Display the ticker field and info pane.
: Display Incoming History.
: Display Incoming History.
D
D
: Display Notification
: Display Notification
B
B
window/Shortcut menu.
window/Shortcut menu.
: Use Phone Book.
: Use Phone Book.
K
K
: Hold down for at least one
: Hold down for at least one
P
P
second to set/cancel Privacy
second to set/cancel Privacy
Filter.
Filter.
: Display E-mail/C-mail menu.
: Display E-mail/C-mail menu.
L
L
: Set/cancel Answer memo.
: Set/cancel Answer memo.
R
R
Delete characters.
Delete characters.
Cancel operation.
Cancel operation.
: Make/answer calls.
: Make/answer calls.
Q
Q
Use the Pair function.
Use the Pair function.
Side Key Assignments
■
: Set/cancel manner mode.
: Set/cancel manner mode.
T
T
If you lose track of where you are or if you make a mistake, press rR to return to the previous screen. Return to the
•
standby screen by holding down sS for at least one second.
: Display the ticker field and info pane.
A
A
: Display Outgoing History.
: Display Outgoing History.
C
C
: Display Main menu.
: Display Main menu.
[
[
: Display EZapps menu.
: Display EZapps menu.
J
J
: Display EZ Service menu.
: Display EZ Service menu.
M
M
: Turn power on/off.
: Turn power on/off.
S
S
End call/communication.
End call/communication.
Cancel operation.
Cancel operation.
:
0〜9*;
0〜9*;
Input phone numbers and characters.
Input phone numbers and characters.
N
N
:
: Activate Camera.
: Activate Camera.
Getting Ready
9
Page 12
Hiding/Redisplaying the
■
Notification windowNotification window
Notification Window
When the Notification window is
displayed on the standby screen, you
can temporarily hide it by pressing
K (Back) and then display the Main
Getting Ready
menu by pressing [.
To redisplay the hidden Notification
window, press B when the standby
screen is displayed.
Turning On Power
Hold down S for at least one second.
You cannot receive or make calls if (out of range
•
indicator) is displayed.
Turning Off Power
■
When the standby screen is displayed, hold down S for
at least one second.
Switching the Display Language to English
You can switch the display language for function names
and other items to English.
When the standby screen is displayed, press [.
Use E to select
➡
press [ (選択 [Select]).
10
機能
(Function) and then
Use G to select
➡
画面表示
(Screen Display) and
then press [ (選択 [Select]).
Use G to select Set Language and then press
➡
[ (選択 [Select]).
Use G to select English and then press
➡
[ (Set).
Initial Setup of E-mail and EZweb
To use e-mail and EZweb, you need to apply for an EZweb
subscription. If you did not apply for an EZweb subscription
at the time of purchase, contact an au shop or the au
Customer Service Center.
Also, before use, you need to configure initial settings. Your
e-mail address is assigned automatically in the initial setup.
When the standby screen is displayed, press L.
➡
Press [ (OK).
After a short while, your e-mail address is displayed.
➡
Press [ (OK).
The initial settings are complete.
You can also configure initial settings by pressing mM
•
or jJ.
Checking Your Phone Number and E-mail Address
When the standby screen is displayed, press [
and then 0.
Page 13
Display Indicators
Display indicators inform you of mail arrival, current settings, etc.
■
Display
⑦
⑨ ⑪⑤
⑦
⑥ ⑩⑧
⑥ ⑩⑧
⑨ ⑪⑤
⑫
⑫
⑬
⑬
⑭
⑭
⑮
⑮
①
①
②③④
②③④
⑯⑰⑱
⑯⑰⑱
Indicator Description
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
⑫
⑬
⑭
⑮
⑯
⑰
⑱
Signal strength
Battery level
Overseas GSM network available
Overseas CDMA network available
Packet communication available
A microSD memory card (commercially available) inserted
During a call
au Media Tuner activated
EZapps activated
Connecting to EZweb
Receiving EZ News EX information
Privacy Filter set
Missed calls
New or unread e-mail/C-mail
Current date and time
Ticker field
Info pane
Notification icon
Shortcut menu
Auto Lock activated
Manner mode set
Answer memo or manner mode set
Getting Ready
11
Page 14
Sub-display
■
①
④
④
Getting Ready
Indicator Description
①
②
③
④
⑤
•
③①
③
②
②
⑤
⑤
Signal strength
Battery level
Current date and time
Manner mode set
Auto Lock activated
au Media Tuner activated
Overseas GSM network available
Overseas CDMA network available
The date and time are set automatically.
Using Main Menu
You can access various functions from the Main menu.
Each Main menu pattern has a different set of items.
Standard Carat
BusinessEZ Infrared
LISMO Player Data Folder
Camera Camera
TV LISMO Player
Book Player TV
Tool Tool
Global Function Global Function
Data Folder Book Player
Infrared Simple Function
EZ FeliCa
PC Site Viewer
Function
Change to list menu/
Change to tile menu
12
Page 15
Changing Your E-mail Address
You can change the account
name of your e-mail address.
When the standby screen is displayed, press L.
Use E to select E-mail Setup and then press
➡
[ (Select).
Use G to select Other and then press
➡
[ (Select).
The cell phone connects to the server.
Use G to select
➡
Eメールアドレスの変更
E-mail Address) and then press [ (Select).
Use G to select the entry box, press [ (Input),
➡
enter your security code, and then press [ (OK).
Your security code is the four-digit number you wrote
•
on your subscription form.
If the security code is incorrectly entered three times
•
consecutively during a single day, the e-mail address
change operation will be disabled until the next day.
Use G to select 送信 (Send) and then press
➡
[ (Select).
E-mail address
E-mail address
△△△@ezweb.ne.jp
△△△@ezweb.ne.jp
Account name Domain name
Account name Domain name
(Change
Use G to select
➡
承諾する
(Accept) and then
press [ (Select).
Use G to select the entry box, press [ (Input),
➡
enter an e-mail address using single-byte
alphanumeric characters, and then press
[ (OK).
For details on entering e-mail addresses, see page 23.
•
Use G to select 送信 (Send) and then press
➡
[ (Select).
Use G to select OK, press [ (Select) and then
➡
[ (OK).
Check that the e-mail address has been updated
•
before pressing [ (OK).
Your e-mail address cannot be changed if the new
•
address you enter in the above procedure is already
being used. In this case, enter a different e-mail
address.
Getting Ready
13
Page 16
Security Code and Passwords
You can use a security code and other passwords
described below.
Take care not to forget your security code and passwords,
because they are required for performing various
operations and using subscription services.
Getting Ready
Security Code
■
Usage
Example
Initial Setting
Lock No.
■
Usage
Example
Initial Setting
①Using the Answering Service (Voice
Mail) and Call Transfer remotely from a
fixed-line phone
②Making inquiries, applications, and
changes while using au Customer
Service Center voice guidance, au web
pages, and EZweb
③Changing the settings of Mail Filter or
Other under E-mail Setup
The four-digit number you wrote on your
subscription form
Changing various settings of the cell
phone
1234
EZ Password
■
Usage
Example
Initial Setting
■
Premium EZ Password
Usage
Example
Initial Setting
Subscribing or canceling subscriptions to
EZweb fee-based contents
The four-digit number you wrote on your
subscription form
①Subscribing or canceling subscriptions
to EZweb fee-based contents paid
by
まとめて
Payment Service)
②Purchasing products from EZweb sites
using
まとめて
Payment Service)
The four-digit number you wrote on your
subscription form
au
支払い
au
支払い
(au Collective
(au Collective
14
Page 17
Making and Answering Calls
Making a Call
When the standby screen is displayed, use 0
to 9 to enter a phone number.
•
When calling to a fixed-line phone, you also need to enter
the area code.
Press Q.
➡
To end the call, press S.
•
After you enter a phone number, you can add 184 or
•
186 to the phone number as follows:
Press {[ (Call).
➡
Use gG to select Add Special No. and then pr
➡
{[ (OK).
Use gG to select 184 or 186 and then pr
➡
{[ (Add).
184: When you do not want to infor
m the other party of
your phone number.
186: When you want to inform the other party of your
phone number.
ess
ess
Making an International Call
001 International Call Service
■
Available without any additional application
Example: To call 212-123-△△△△ in the USA
Enter the access code, a country code, area code
and phone number, and then press Q.
001
KDDIinternational
KDDIinternational
accesscode
accesscode
International call charges are billed together with
•
monthly local call charges.
For more information on 001 International Call Service,
•
dial either of the following numbers:
From au cell phones (toll-free):
157 (area code not required)
From fixed-line phones (toll-free):
0077-7-111
(Open 9:00 to 20:00 everyday)
↑
↑
010 212 123-XXXX1001
010 212 123-XXXX1
Country
Country
code
code
(USA)
(USA)
↑
↑
↑
↑
Areacode↑Phonenumber
Areacode↑Phonenumber
Making and Answering Calls
15
Page 18
Answering a Call
To answer a call, press Q.
•
To end the call, press S.
Display When a Call is Received
■
The phone number of the caller appears.
If the caller's phone number and name are in the phone
Making and Answering Calls
book, the name is also displayed.
When the phone number of the caller is not displayed, one
of the following indicators may appear.
Indicator Meaning
ID Unsent
Payphone
Not Support
Missed Call Notification
■
If you did not answer a call,
to let you know that you missed a call.
To check the caller's phone number, use F to select
Missed Call and then press [ (Select). You can then return
the call (see the procedure on the right).
The caller did not send a Caller ID.
The call is from a pay phone.
The call is from a phone that does not
support Caller ID.
and Missed Call are displayed
Returning a Call (Outgoing History/ Incoming History)
Example: Returning a call to a phone number in the
When the standby screen is displayed, press D.
•
➡
➡
•
incoming history
Press C while the standby screen is displayed to display
the Outgoing History screen.
Use G to select the phone number you want
to call and then press [ (Detail).
Press C to display the Outgoing History screen.
•
Press Q.
The cell phone can store up to 50 phone numbers in
each of the incoming and outgoing history.
One-ring Calls
What is a One-ring Call?
■
A one-ring call is a call from an unknown caller that only
rings once, causing it to be stored in the incoming history.
One-ring calls are often used to get you to return the call,
which will connect you to a dating service or some other
service that charges you at high rates.
16
Page 19
One-ring Indicator
■
(Red) indicator on the Incoming History screen indicates
you have received a one-ring call (a call rang for three
seconds or shorter). Be careful when you return a call to an
unknown caller.
Even in manner mode, the cell phone still emits a
•
sound when autofocusing, a shutter sound when you
take a photo.
Changing the Incoming Ring Tone
Adjusting the Earpiece Volume during a Call
During a call, use G.
A: Increases the volume.
•
B: Decreases the volume.
•
Press [ (OK).
➡
Turning On Manner Mode
When the standby screen is displayed, hold down
T for at least one second.
This turns on manner mode, and displays , and on
the standby screen. This also turns on Answer memo,
which is indicated by
Turning Off Manner Mode
■
When the standby screen is displayed, hold down T for
at least one second.
Turning off manner mode causes
from the standby screen. Answer memo is also turned off,
which is indicated by
screen.
on the standby screen.
, and to disappear
disappearing from the standby
When the standby screen is displayed, press [.
Use E to select Function and then press
➡
[ (Select).
Use G to select Sound/Vib/Lamp and then
➡
press [ (Select).
Use G to select Incoming Setup and then press
➡
[ (Select).
Use G to select Incoming Call and then press
➡
[ (Select).
Use G to select
➡
(Ringtone) and then press
[ (Select).
➡
Use G to select Original and then press
[ (Select).
➡
Use G to select a ring tone and then press
[ (Set).
The incoming ring tone is set.
If you press K (Play), the tone plays.
•
Press J (OK).
➡
Making and Answering Calls
17
Page 20
Adjusting the Incoming Ring Tone Volume
When the standby screen is displayed, press [.
Use E to select Function and then press
➡
[ (Select).
Use G to select Sound/Vib/Lamp and then
➡
Making and Answering Calls
press [ (Select).
Use G to select Incoming Setup and then press
➡
[ (Select).
Use G to select Incoming Call and then press
➡
[ (Select).
Use G to select
➡
(Ringtone Volume) and
then press [ (Select).
➡
Use G to adjust the volume and then press
[ (Set).
Each press of G changes the volume one step.
•
STEP ↑
STEP↓
Maximum
↑
Standard
↓
Minimum
OFF The ring tone does not sound.
The ring tone volume gradually increases.
The ring tone volume gradually decreases.
The ring tone sounds at the set volume.
Turning On the Answer Memo
When the standby screen is displayed, hold down
R for at least one second.
is displayed on the standby screen.
Turning Off the Answer Memo
■
When the standby screen is displayed, hold down R for
at least one second. The answer memo is turned off and
disappears from the standby screen.
•
The cell phone can record a maximum of ten
messages, each up to 60 seconds long.
Answer memo is a function that automatically answers
•
calls and allows callers to record messages. Use the
Answering Service (Voice Mail) when your phone is
turned off or when you are in a location where a signal
cannot be received.
Playing a Message
■
If a message is recorded, Answer Memo appears
on the standby screen.
Use F to select Answer Memo and then press
➡
[ (Select).
Use G to select the message you want to play
➡
and then press [ (Play).
To stop playing the message, press [ (Stop).
•
Press J (OK).
➡
18
Page 21
Deleting a Message
■
When the standby screen is displayed, press R.
Use G to select Answer Memo and then press
➡
[ (Select).
Use G to select Answer Memo List and then
➡
press [ (Select).
Use G to select the message you want to
➡
delete and then press J (SubMenu).
Use G to select Delete and then press
➡
[ (OK).
Use G to select Delete One and then press
➡
[ (OK).
Use G to select YES and then press [ (OK).
➡
Making and Answering Calls
19
Page 22
Global Function
The E08T supports Global Passport GSM and Global
Passport CDMA services. You can use your E08T overseas
without any additional application.
Setting the Area
When the standby screen is displayed, press [.
Use E to select Tool and then press [ (Select).
➡
Global Function
Use G to select Global Function and then press
➡
[ (Select).
Precautions are displayed.
➡
Check the precautions and then press [ (OK).
➡
Use G to select Area Setting and then press
[ (Select).
➡
Use G to select Overseas (Auto) and then press
[ (Select).
➡
Use G to select YES and then press [ (OK).
Some functions are not available when Area Setting is
•
not set to Japan.
20
Obtaining the Latest PRL (Preferred Roaming List)
Manually update and set the PRL (preferred roaming list)
before traveling abroad. The PRL setting is necessary for
using the E08T in CDMA network areas.
When the standby screen is displayed, press [.
Use E to select Tool and then press [ (Select).
➡
Use G to select Global Function and then press
➡
[ (Select).
Precautions are displayed.
➡
Check the precautions and then press [ (OK).
➡
Use G to select PRL Setting and then press
[ (Select).
➡
Use G to select PRL Manual Update and then
press [ (Select).
The cell phone connects to the server.
➡
Use G to select PRL
and then press [ (ダウンロード [Download]).
Follow the on-screen instructions to download the latest
PRL.
The PRL (preferred roaming list) is the area information
•
of overseas carriers offering international roaming
service in partnership with KDDI (au).
To obtain (download) the PRL, you need to subscribe
•
to EZweb and make initial settings (see page 10) while
in Japan.
ダウンロード
(Download PRL)
Page 23
Calling Japan from Overseas
When the standby screen is displayed, use 0
to 9 to enter a phone number.
Press [ (Call).
➡
Use G to select Voice Call and then press
➡
[ (OK).
Use G to select Call to Japan and then press
➡
[ (OK).
Press [ (Call).
➡
When you make an international call from Japan to a
•
cell phone which is compatible with Global Passport
GSM or Global Passport CDMA, you can do it in the
same way as making domestic calls within Japan.
Global Function
21
Page 24
Character Input
Character Entry Modes
When a character entry screen is displayed, you can select
a character entry mode if you press K (ChrTyp).
Menu Items
■
漢 : Kanji conversion mode
カ : Double-byte katakana mode
Ａ : Double-byte alphanumeric mode
Character Input
１ : Double-byte number mode
カナ
: Single-byte katakana mode
ＡＢ
: Single-byte alphanumeric mode
１２
: Single-byte number mode
Use F to select a character entry mode and then
press [ (Select).
Entering Alphanumeric Characters
You can use the keys 1 to 0 to enter characters. More
than one character is assigned to each key.
The following table shows the key assignment for entering
characters.
Number of Times to Press the Key
Key123456789101112
．
:1
:2 ａ
:3 ｄｅｆ
:4 ｇｈｉ
:5 ｊ
:6 ｍｎｏ
:7 ｐｑｒｓ
:8 ｔｕｖ
:9 ｗｘｙｚW
:0 0
:*
:;
When you change your e-mail address, you cannot use
the characters in
address to the left of @).
＠−＿／：
ｂｃABC2
D E F 3
G H I 4
ｋｌJKL5
MN O 6
P Q R S 7
T U V 8
Inputs symbols (switches an unconfir
character between uppercase and lowercase).
Adds a line br
opposite order.
eak and displays characters in the
■
for the account name (part of the
〜
X Y Z 9
Inputs symbols
？
,ʼ
med
！1
22
Page 25
Entering Two or More Characters
■
Assigned to the Same Key
After you enter the first character, press C and then enter
the next character.
■
Deleting Characters
To delete one character at a time, move the cursor to the
character you want to delete and then press R. To delete
all characters to the right of the cursor, hold down R for
at least one second. If there are no characters to the right of
the cursor, holding down R will delete all the characters.
■
Starting a New Line
Press ;.
•
Certain functions such as C-mail do not support
entering new lines.
Entering E-mail Addresses
E-mail Address Compatible Characters
■
Before you enter an e-mail address, switch to the Single-
•
byte alphanumeric mode.
When changing your e-mail address, you can enter up
•
to 30 single-byte alphanumeric and symbol characters
for the account name (part to the left of @). Note the
following:
- Uppercase characters cannot be used.
- Period (.) or zero (0) cannot be used as the first
character.
How to Enter E-mail Addresses
■
Example: Entering "[email protected]"
Enter "taro.23".
t : Press 8 once.
a : Press 2 once.
r : Press 7 three times.
o : Press 6 three times.
. : Press 1 once.
2 : Press 2 once and then ;.
3 : Press 3 once and then ;.
Enter "@".
➡
@: Press 1 twice.
➡
Enter "toshiba" and then press [ (OK).
t : Press 8 once.
o : Press 6 three times.
s : Press 7 four times.
h : Press 4 twice and then C.
i : Press 4 three times.
b : Press 2 twice and then C.
a : Press 2 once.
➡
Press J (SubMenu).
➡
Use G to select Phrase and then press
[ (OK).
➡
Use G to select Internet and then press
[ (Select).
➡
Use G to select .co.jp and then press
[ (Select).
".co.jp" is entered.
Character Input
23
Page 26
Entering Pictograms
When a character entry screen is displayed, press
K (ChrTyp).
Press J (List).
➡
Use E to select
➡
[ (Select).
➡
Use E to select the pictogram you want to
enter and then press [ (OK).
•
Character Input
You can enter pictograms consecutively if you press
J (Repeat) instead of [ (OK).
and then press
24
Page 27
Phone Book
Saving a Phone Book Entry
When the standby screen is displayed, hold down
K for at least one second.
➡
Use G to select
[ (Select).
➡
Enter a name and then press [ (OK).
The [Reading] for the name is entered automatically.
➡
Use G to select [Phone No.1] and then
press [ (Select).
➡
Enter a phone number and then press [ (OK).
If the phone number is for a fixed-line phone, enter the
•
phone number starting with the area code.
Use G to select a phone number type and
➡
then press [ (Select).
Follow the next step to enter an e-mail address. If
•
you do not want to enter an e-mail address, press
J (Reg).
Use G to select [E-mail Address1] and then
➡
press [ (Select).
Enter an e-mail address and then press
➡
[ (OK).
Use G to select an e-mail address type and
➡
then press [ (Select).
Press J (Reg).
➡
[Name] and then press
The phone book can store up to 1,000 entries.
•
The cell phone automatically saves an entry to the
•
lowest available memory number from 000 to 999.
You can save five phone numbers and five e-mail
•
addresses for each phone book entry.
You can also assign a group No., and enter birthday,
•
address, and other information.
Dialing from the Phone Book
When the standby screen is displayed, press K.
Use E to select the entry containing the
➡
phone number you want to dial and then press
[ (Detail).
Use G to select the phone number and then
➡
press [ (Select).
Use G to select Voice Call and then press
➡
[ (OK).
Editing Phone Book Entries
When the standby screen is displayed, press K.
Select an entry and press [ (Detail).
➡
Press K (Edit).
➡
Edit the contents and then press J (Reg).
➡
Use G to select Overwrite and then press
➡
[ (OK).
Phone Book
25
Page 28
Saving a Phone Number from the Incoming or Outgoing History
Example: Saving a phone number from the incoming history
When the standby screen is displayed, press D
and use G to select the phone number you want
to save.
➡
➡
➡
Phone Book
➡
to the phone book
Press J (SubMenu).
Use G to select Reg to Adrs Book and then
press [ (OK).
Use G to select Register New and then press
[ (Select).
Use G to select a phone number type and
then press [ (Select).
For details on saving a phone book entry, see page
•
25.
26
Page 29
Pair Function
You can register a maximum of five pair partners you
contact often to easily call or send mail.
Registering a Pair Partner
Making a Call to a Pair Partner
When the standby screen is displayed, press Q.
Use F to select the person you want to call.
➡
Use G to select Call and then press [ (Select).
➡
When the standby screen is displayed, press Q.
Use F to select a blank screen and then press
➡
[ (Select).
Use G to select YES and then press [ (OK).
➡
Use E to select a pair partner, press [ (Detail)
➡
and then [ (Select).
When registering a phone book entry with multiple
•
phone numbers and e-mail addresses as pair partner,
select the phone number and e-mail address to use
with the Pair function.
When you delete a phone book entry registered in the
•
pair partner, the phone book entry is also deleted from
the Pair function.
Sending Mail to a Pair Partner
When the standby screen is displayed, press Q.
➡
Use F to select the person you want to send
mail.
➡
Use G to select E-mail or C-mail and then
press [ (Select).
To create an e-mail message, see "Creating and
•
Sending E-mail Messages" on page 28. To create a
C-mail message, see "Creating and Sending C-mail
Messages" on page 31.
Pair Function
27
Page 30
Using E-mail
To use e-mail, you need to apply for an EZweb subscription.
If you did not apply for an EZweb subscription at the time of
purchase, contact an au shop or the au Customer Service
Center. Also, before use, you need to configure initial
settings.
You can send and receive e-mail with other cell phones
that support e-mail, and with PCs. In addition to text
messages of up to 5,000 double-byte (or 10,000 singlebyte) characters, you can also send photos and movies by
e-mail.
•
The packet communication charge for sending and
receiving e-mail applies to the amount of data sent
Mail
and received.
•
You can send an e-mail message to up to 30 different
addresses at one time.
•
You can send up to 1,000 e-mail messages per day (a
message with multiple recipients is counted as more
than one message).
•
Sending and receiving e-mail messages that include
attachment data may take a while.
Creating and Sending E-mail Messages
When the standby screen is displayed, press L.
Use E to select Create New and then press
➡
[ (Select).
Use G to select Address and then press
➡
[ (Select) twice.
Use G to select Address Book and then press
➡
[ (Select).
Use E to select a phone book entry and then
➡
press [ (Detail).
Use E to select an address and then press
➡
[ (Select).
Press K (OK).
➡
Use G to select Subject and then press
➡
[ (Select).
Enter a subject and then press [ (OK).
➡
You cannot enter single-byte katakana characters or a
•
new line in a subject.
Use G to select Te xt and then press
➡
[ (Select).
Enter text and then press [ (OK).
➡
You cannot enter single-byte katakana characters.
•
Press K ( Send).
➡
28
Page 31
Reading Received E-mail Messages
When you receive an e-mail message, E-mail
appears on the standby screen.
Use F to select E-mail and then press
➡
[ (Select).
Press [ (Select).
➡
: Indicates a read message.
•
•
: Indicates an unread message.
Use G to select the new message and then
➡
press [ (Select).
Reading an E-mail Message from the E-mail Menu
■
When the standby screen is displayed, press L to display
the E-mail menu, use E to select Inbox and then press
[ (Select).
For subsequent operations, see "Reading Received E-mail
Messages" above.
Reading an E-mail Message with an Attached Photo or Movie
Example: Viewing an attached photo
Display the e-mail message that has an attached
photo (above).
Use G to select the file name and then press
➡
[ (Select).
Use G to select the file name and then press
➡
[ (Receive).
Press [ (Play).
➡
Selecting the file name or pressing
•
may be unnecessar
depending on the file size.
y for some files to be displayed,
(Receive)
{[
Replying to Received E-mail Messages
When the standby screen is displayed, press L.
Use E to select Inbox and then press
➡
[ (Select).
Press [ (Select).
➡
Use G to select the message you want to
➡
reply to and then press [ (Select).
Press K (Reply).
➡
"Re:" is prefixed to the subject, and the text of the
message is quoted.
➡
Refer to "Creating and Sending E-mail
Messages" (page 28) for subsequent
operations.
Mail
29
Page 32
Rejecting Spam
Setting mail filters to reject spam is recommended.
The
サポート設定
mail filters easily by answering questions that appear on the
screen.
Setting Mail Filters
■
Example: Connecting to
When the standby screen is displayed, press L.
Use E to select E-mail Setup and then press
➡
[ (Select).
Use G to select Mail Filter and then press
➡
[ (Select).
Mail
[ (Select).
➡
Use G to select the input box and then press
Use G to select
➡
[ (Input).
➡
Enter your security code and then press
[ (OK).
➡
Use G to select
[ (Select).
➡
Use G to select
Settings) and then press [ (Select).
(Supportive Settings) helps you to set
サポート設定
次へ
(Next) and then press
送信
(Send) and then press
サポート設定
(Supportive Settings)
(Supportive
カンタン設定 (Simple Settings)
■
Set the filter by answering
サポート設定
(Supportive Settings)
フィルターレベル（高）
Filter Level (High)
フィルターレベル（中）
Filter Level (Medium)
フィルターレベル（低）
Filter Level (Low)
You can also prevent spam by changing your e-mail
•
address. For details on changing your e-mail address,
see page 13.
questions
This is recommended for users
who want to configure settings
while confirming conditions.
Shut out all mail from PCs
This is recommended for users
who only want to send mail
to and receive mail from cell
phones.
Block unsolicited advertisement,
spoof e-mail and mail from
specific addresses
This is recommended for users
bothered by certain senders or
spam mail.
Block unsolicited advertisement
and spoof e-mail
This is the minimum level
recommended for all users.
30
Page 33
Use E to select a phone book entry and then
Using C-mail
C-mail is a service that uses phone numbers as addresses
to exchange messages between au cell phones that
support C-mail. A C-mail message can contain up to 50
double-byte (or 100 single-byte) characters.
The C-mail send charge applies when sending C-mail.
•
➡
press [ (Detail).
Use E to select a phone number and then
➡
press [ (Select).
Press K (Send).
➡
Reading Received C-mail Messages
C-mail Safety Block
■
C-mail safety block is a function that allows you to reject
C-mails that include URLs (http://△△△, https://△△△) or
phone numbers in the C-mail message text.
C-mail safety block is valid by default. Cancel the setting if
you want to receive C-mails that include URLs and phone
numbers in the message text.
Creating and Sending C-mail Messages
When the standby screen is displayed, hold down
L for at least one second.
Use G to select Create New and then press
➡
[ (Select).
Enter text and then press [ (OK).
➡
Use G to select
➡
[ (Edit).
➡
Use G to select Quote Adrs Book and then
press [ (OK).
[Address] and then press
When you receive a C-mail message, C-mail
appears on the standby screen.
➡
Use F to select C-mail and then press
[ (Select).
➡
Press [ (Select).
•
•
Use G to select the new message and then
➡
press [ (View).
Reading a C-mail Message from the C-mail Menu
■
When the standby screen is displayed, hold down L for
at least one second to display the C-mail menu, use G to
select Inbox and then press [ (Select).
For subsequent operations, see "Reading Received C-mail
Messages" above.
: Indicates a read message.
: Indicates an unread message.
Mail
31
Page 34
Camera
Your cell phone has a CMOS camera with 3.19 effective
megapixels for shooting photos and movies. You can use
the self-timer and autofocus.
Shot images can be used for the standby screen, and
attached to e-mail messages.
Landscape Position
■
Display
Display
Photo Taking Tips
When taking photos, position the cell phone so that is
not displayed upside down or inclined. Frame the subject
within the display and hold the cell phone steady with both
hands to avoid shaking.
Portrait Position■
Camera
Camera (lens)Camera (lens)
32
Lux sensor
Lux sensor
About Photo Modes
The following modes are available for taking photos. 3M is
set at the time of purchase.
Mode Photo Size Storage Location
W.paper
mode
DSC
mode
* When a microSD memory card (commercially available) is
not inserted, the files are saved to the Data Folder of the
cell phone.
•
W.paper (Normal)
W.paper (Wide)
W.paper (F.Wide)
0.3M
1M
2M
2.5M (F.Wide)
3M
Take care not to cover the lens and lux sensor with a
strap or finger.
The Photo Folder in the Data
Folder of the cell phone
The DSC Folder in the Data
Folder of a microSD
memory card*
Page 35
Taking a Photo
When the standby screen is displayed, hold down
N for at least one second.
The monitor screen appears.
➡
Point the AF frame at the subject and then
press [ (Shoot).
The camera focuses automatically and the shutter clicks.
The preview screen is displayed.
Using N to Take a Photo
■
Point the AF frame at the subject, press N halfway to
focus, and then press N fully to release the shutter.
■
Saving a Photo
Press [ (Save) on the preview screen.
If you do not want to save the photo, press rR in the
•
pr
eview screen.
Viewing Photos
When the standby screen is displayed, press [.
Use E to select Data Folder and then press
➡
[ (Select).
Use G to select Photo Folder and then press
➡
[ (Select).
Use G to select a folder and then press
➡
[ (Select).
Use E to select the photo you want to view
➡
and then press [ (Select).
Camera
33
Page 36
EZweb
EZweb is an information service that allows you to enjoy
browsing the Internet on your cell phone. You can also
download Chaku-Uta-Full
contents from web pages.
To use EZweb, you need to apply for an EZweb
subscription. If you did not apply for an EZweb subscription
at the time of purchase, contact an au shop or the au
Customer Service Center. Also, before use, you need to
configure initial settings.
•
The packet communication charge for EZweb
connection applies to the amount of data sent and
received, not to the length of time connected.
•
In addition to communication charges, some sites
charge for providing information.
®
, Chaku-Uta®, news, and other
EZweb
EZweb Subscription RequiredEZweb Subscription Required
34
Page 37
Accessing Sites
Viewing the au one Top
■
You can access EZweb from the au one Top. A variety of useful and fun sites are available on EZweb.
When the standby screen is displayed, press
In this manual, menu of "Standard au one Top" is described. However, "Business EZ" is set for au one Top at the time
•
of purchase. To switch to "Standard au one Top", select
select
スタンダードな
au one Top (Standard au one Top).
M
, use F to select EZweb, use G to select au one Top and then press [ (Select).
トップページ切替
(Switch top page) from the au one Top and
au one Top
キーワード検索機能 (Search by Keyword)
Provides a search function for searching for
information by keyword.
カテゴリ（メニューリスト） (Category (Menu List))
Provides a list of various content provider sites.
トップニュース (Top News)
Provides automatic updates of the latest news.
最新オススメ情報 (Latest News)
Introduces up-to-date information
concerning entertainment, daily life, etc.
天気・乗換・テレビ・占い (Weather,
Transportation, TV & Horoscope)
Provides direct access to these au one services.
買う (Shopping & Auctions)
Provides a list of shopping and auction sites
available from your cell phone.
知る (Tips & Tools)
Provides information on sports and stock
prices, as well as useful tools such as maps
and dictionaries.
楽しむ (Hobbies & Culture)
Provides the latest information, such as games,
music, books, hobbies and entertainment.
暮らす (Lifestyle)
Provides travel, restaurant and other
lifestyle-oriented information.
集まる (Community)
Provides interesting and useful information
that you can use for SNS or blogs.
austyle
Introduces information and sites that au
recommends.
とくする情報 (Valuable Information)
Presents gifts and push information to the
EZweb subscriber for free.
auお客さまサポート (au Customer Support)
Provides information about charges, various
applications, au online manual and notices
from au.
カンタンアクセス・オープンサイト (Simple Access & Open Site)
Provides easy access and introduces open sites.
災害用伝言板 (Disaster Message Board)
Register and confirm safety information in
time of disaster.
ENGLISH
Introduces English sites.
EZweb
35
Page 38
Basic Operations
■
Use G to select the site you want to access and then
press [ (Select).
Press L or R to return to the previous screen. Hold
down either key for at least one second to return to the au
one Top.
The following describes the basic operations that are
available while accessing sites.
EZweb
Key
Operation
S
G
F
L、R
Exits EZweb.
Moves the cursor up and down.
When there is data available above or below
the current screen, scrolls up and down the
screen one line at a time.
When there is data available above or below
the current screen, scrolls the screen page
by page.
D：Scrolls one page up.
C：Scrolls one page down.
Returns to the previous screen.
Description
Bookmarking Frequently Accessed Pages
When the page you want to bookmark is
displayed, press J (Browser Menu).
Use G to select New bookmark and then press
➡
[ (OK).
Some pages cannot be bookmarked.
•
Press J (Reg).
➡
The displayed page is bookmarked, and its title and
URL are added to the Bookmark.
The Bookmark can contain up to 100 titles and URLs.
•
Viewing Bookmarked Pages
When the standby screen is displayed, press M
and then use F to select EZweb.
Use G to select Bookmark(s) and then press
➡
[ (Select).
Use G to select the bookmark for the page
➡
you want to view and then press [ (Connect).
The cell phone connects to the site.
36
Page 39
Checking Charges
When the standby screen is displayed, press [.
Use E to select Function and then press
➡
[ (Select).
Use G to select Time/Toll/Sub and then press
➡
[ (Select).
Use G to select Inquire Toll and then press
➡
[ (Select).
Use G to select YES and then press [ (OK).
➡
Select the item you want to check and then follow the
•
on-screen instructions.
Downloading Chaku-Uta-Full®/
Chaku-Uta
When the standby screen is displayed, press M
and then use F to select EZweb.
Use G to select au one Top and then press
➡
[ (Select).
Use G to select
➡
(Category (Menu List)) and then press [ (OK).
➡
Use G to select
フル・ビデオクリップ
Clip) and then press [ (Select).
®
カテゴリ（メニューリスト）
着うた
(Chaku-Uta®) or
(Chaku-Uta-Full® ･Video
着うた
Use G to select the site you want to access
➡
and then press [ (Select).
The download instructions appear.
Fee-based information sites require entry of EZ
•
password or Premium EZ password. Follow the onscreen instructions to enter either password. See page
14 for details.
Follow the on-screen instructions.
➡
Download is completed.
Downloaded data is saved automatically to the Data Folder.
•
Press K (Play).
➡
The downloaded Chaku-Uta-Full® or Chaku-Uta® plays.
•
This procedure is only an example for the purpose of
explanation and may differ from actual procedures.
Follow the instructions on the site from which you want
to download the data.
EZweb
37
Page 40
EZ News EX
Use the EZ News EX to display on the standby screen the
latest news, weather forecast, horoscope and others that
are delivered free of packet communication charges. You
can view detailed information on a news item or weather
forecast by selecting the ticker field or info pane.
To make all the EZ News EX services available to you,
you need to fill out a separate application form (and pay
information charges).
You can use the EZ News EX by making a few simple settings
following the EZweb initial setup.
Basic Operations
EZ News EX
When the standby screen is displayed, press A
to select the ticker field.
You can view detailed information on a news item or weather
forecast.
You can also select the info pane.
•
The EZ News EX information is automatically
•
received at no charge. Note, however, that packet
communication charges may be incurred for manual
updates and connecting to EZweb sites. In this case,
a confirmation screen for network connection is
displayed.
The EZ News EX information is updated at regular time
•
intervals.
appears while receiving information.
EZweb Subscription RequiredEZweb Subscription Required
Setting EZ News EX
The EZ News EX is available free of charge. You have only
to make a few simple settings. After following the procedure
in “Initial Setup of E-mail and EZweb” on page 10, configure
EZ News EX settings. If you did not configure the EZ News
EX settings at the time of the initial setup, follow the steps
below.
When the standby screen is displayed, select the
ticker field and then press [ (OK).
➡
Follow the on-screen instructions.
The setup procedure is completed.
When the standby screen returns, a message asking
•
you to wait for a while until the next update takes place
appears in the ticker field.
38
Page 41
Canceling EZ News EX
■
When the standby screen is displayed, select the
ticker field and then press [ (News).
Press J (サブメニュー[Submenu]), use G
➡
to select
Settings/Cancellation) and then press
[ (選択[Select]).
Use G to select
➡
Cancellation) and then press [ (選択[Select]).
Follow the on-screen instructions.
➡
Changing the Reception Settings for
■
サービス利用設定変更・解除
サービス利用解除
(Service
(Service
EZ News EX Information
You can change the ring tone, vibrator and LED settings
under M216 NewsFlash Receive for reception of EZ News EX
information.
If you do not want the ring tone to sound when receiving EZ
News EX information, set the volume to OFF.
EZ News EX
39
Page 42
EZ Navi
Using GPS (Global Positioning System), EZ Navi provides
useful positional information services.
EZweb Subscription RequiredEZweb Subscription Required
When the standby screen is displayed, press M
and then use F to select the EZnavi.
•
The packet communication charges for using EZ Navi
services apply to the amount of data sent and
received. Some services may require a separate
information fee.
Before using EZ Navi, you must configure initial
•
settings of EZweb (page 10).
Passenger Seat Navi for People in the Passenger Seat to Check the Route
Passenger Seat Navi guides the passengers to the
EZ Navi
destination with the best route using voice and map.
Drivers are not allowed to use Passenger Seat Navi.
Security Navi to Check Where Your Kids Are
The Security Navi application is made up of the following
three functions:
いつでも位置確認 (Auto Position Search [monthly charge]),
エリア通知 (Area Message [no monthly charge]),
位置確認メール (Position Search Mail [no monthly charge])
Using these functions, you can check the position of an au
cell phone that supports Security Navi; and automatically
send a notification to the specified au cell phones when you
enter (or are in) or leave (or are no longer in) the set area
within a predetermined period of time.
40
Page 43
EZ Navi Walk for When You Go Out
Displays various useful menu items for when you are out.
There are two menu modes: the Full Mode menu for those
who want to use all the convenient functions including the
latest features, and the Simple Mode menu with limited
functions allowing you to use the service with simple
operation.
The following table describes the Full Mode menu.
Find the most preferable
トータルナビ／地図
(Total Navigation/Map)
乗換／時刻表
(Connection/Timetable)
お店／施設／イベント
(Shop/Facility/Event)
ドライブ／渋滞情報
(Road/Traffic Information)
オススメ便利メニュー
(Useful Menu)
設定／会員登録／インフォ
(Setting/Membership
Registration/Information)
combination of transportation
(trains, airplanes, buses and taxis),
and check out maps of your current
location and places you like to go.
Search for train connections,
timetables and other public
transportation information.
Search for local stores, facilities
or events.
Check out road traffic information
in real time.
View information on services that
are available on PCs, and use
advanced functions of EZ Navi
Walk that you can enjoy.
Configure various settings, sign
up as a member or check out
various useful information.
The Map of Your Current Location
■
★ represents your initial location. As you
start moving, changes of your location are
tracked by continuous positioning and
indicated in real time by
現在地の地図
The
option displays the current map in real time.
3D Navi
■
Shows a 3D view at guidance points and around the
destination area.
(The Map of Your Current Location)
.
EZ Navi
Some of the menu options require a monthly charge.•
41
Page 44
Evacuate Navi to Guide You Home or to Nearby Evacuation Areas during Disasters
Nearby public evacuation areas or the direction to your
home can be determined using the map data pre-installed
on the E08T (
Other useful contents can be downloaded from the
ナビ
(Evacuate Navi) section of the EZweb site.
•
Some contents require a monthly charge.
•
Use the information on the screen as a reference and
always follow the instructions of police, fire and other
municipal authorities.
•
When using Evacuate Navi, checking your current
position may take more time than usual depending on
the status of the GPS satellites.
EZ Navi
避難所マップ
[Evacuate Area Map] ).
災害時
42
Page 45
TV (1Seg)
"1Seg", a mobile terrestrial digital television service in
Japan, is available on the E08T.
Using the TV Antenna
■
The E08T has a built-in TV antenna. When watching TV
(1Seg), do not cover the cell phone with your hands for
better signal reception.
Before using TV, you must configure initial settings of
•
EZweb (page 10).
If you are watching TV indoors, you may be able to
•
improve the reception by moving closer to a window.
The continuous viewing times of TV (1Seg) are as
•
follows. The figures vary according to the usage of
data broadcasts.
Continuous
viewing time
Using
earphones
Using the
speaker
DBEX ON: Approx. 3 hrs
DBEX OFF: Approx. 3 hrs
DBEX ON: Approx. 3 hrs
DBEX OFF: Approx. 3 hrs
EZweb Subscription RequiredEZweb Subscription Required
following homepage.
The Association for Promotion of Digital Broadcasting
From a PC http://www.dpa.or.jp/
From a cell phone http://www.dpa.or.jp/1seg/k/
For information about the "1Seg" service, refer to the
•
Initial Setup of au Media Tuner
To watch TV (1Seg) using the au Media Tuner, you need to
configure initial settings.
When the standby screen is displayed, press [.
Use E to select TV and then press [ (Select).
➡
Use G to select TV (1Seg) and then press
➡
[ (Select).
Disclaimer notes are displayed.
➡
Use G to check the disclaimer notes, use G
to select OK, and then press [ (選択 [Select]).
The initial setting screen for using the au Media Tuner is
displayed.
Follow the on-screen instructions to configure each
•
setting. Then, the screen for setting TV (1Seg)
channels appears.
Use G to select
➡
(Broadcasting wave)) and then press [ (選択
[Select]).
Automatic channel scanning begins. When receivable
channels are found, the channel setup is completed.
Select
•
マニュアル設定
manually.
オート設定（放送波）
(Manual) to set the channel
TV (1Seg)
(Auto
43
Page 46
Watching TV (1Seg)
When the standby screen is displayed, press [.
Use E to select TV and then press [ (Select).
➡
Use G to select TV (1Seg) and then press
➡
[ (Select).
To Change Channels
■
Use F to change channels.
You can select TV (1Seg) and EZ Channel-Plus/EZ Channel
programs.
TV (1Seg)
TV (1Seg)
Change channels one by one.
Change channels one by one.
1ch 2ch
1ch 2ch
…
…
12ch
12ch
Basic Operations
Launch TV (1Seg) to start receiving data broadcasts.
The data operation screen appears when a data broadcast
is received. Press K (Vol/Ch) on the data operation screen
to switch to the TV operation screen.
On the TV operation screen, pressing Q switches the
display.
Data operation screen
Data operation screen
(Vol/Ch)
(Vol/Ch)
K
K
(戻る[Retur
(戻る[Retur
K
K
TV operation screen
TV operation screen
n])
n])
TV (1Seg)
Before using this feature, you must configure au Media
•
Tuner initial settings (page 43).
Channels cannot be changed with fF when the data
•
operation scr
44
EZ Channel-Plus/EZ Channel
EZ Channel-Plus/EZ Channel
Program 16 Program 2 Program 1
Program 16 Program 2 Program 1
…
…
een is displayed.
To adjust the volume, use gG* or tT/uU.
•
* Only available on the TV operation scr
een.
Exiting the au Media Tuner
Press S, use G to select はい (YES) and then
press [ (OK).
Page 47
In Case of Loss of Your E08T
The Remote Ctrl Lock allows you to remotely activate
the Auto Lock, FeliCa Lock, and Address Book Lock,
preventing others from using your cell phone.
Setting Conditions for Activating the Remote Ctrl Lock
You can activate the Remote Ctrl Lock by calling your E08T
a set number of times from a registered phone number
within a specified period of time.
When the standby screen is displayed, press [.
➡
Use E to select Function and then press
[ (Select).
➡
Use G to select Privacy/Rstr and then press
[ (Select).
➡
Use G to select Security Lock and then press
[ (Select).
➡
Use G to select Rem. Ctrl Lock and then press
[ (Select).
➡
Enter Lock No., and then press [ (OK).
➡
Use G to select Valid No. and then press
[ (Select).
➡
Use G to select [Register New] and then press
[ (Select).
Use G to select Direct Input, press [ (OK),
➡
enter a phone number, and then press [ (OK).
Press J (Comp).
➡
Use G to select Duration (min) and then press
➡
[ (Select).
Enter a time and then press [ (Set).
➡
This sets the time limit for receiving the set number of
•
calls after the first call is received.
You can set a time from one to ten minutes.
•
Use G to select No. of Incm, and then press
➡
[ (Select).
Enter a number of calls, and then press
➡
[ (Set).
This sets the number of calls to receive to activate the
•
Remote Ctrl Lock.
You can set a number of calls from three to ten.
•
Press J (Save).
➡
Use G to select YES and then press [ (OK).
➡
Remotely Activating the Remote Ctrl Lock on Your E08T
Call the E08T from the registered phone number
repeatedly within the set time limit.
When the specified number of calls are received, the
•
Remote Ctrl Lock is activated and a message plays
telling you that the cell phone is locked.
In Case of Loss of Your E08T
45
Page 48
Activating the Remote Ctrl Lock by the Security Lock Service
Even if the Remote Ctrl Lock is not set in advance, the
Remote Ctrl Lock can be activated by calling au Customer
Service Center or completing the application process on au
Customer Support from a PC.
The Security Lock Service is available free of charge.
Calling au Customer Service Center for
■
Activating/Canceling the Remote Ctrl
In Case of Loss of Your E08T
Lock
From an au cell phone: 113 without a prefix (toll free)
From any other cell phone or fixed-line phone:
0077-7-113 (toll free)
Open 24 hours
Follow the voice guidance to complete the application
process.
Activating/Canceling the Remote Ctrl
■
Lock from a PC
Login to au Customer Support (https://cs.kddi.com/) and
complete the application process by following the onscreen instructions.
The Remote Ctrl Lock cannot be activated when
•
the E08T is turned off or out of the service area, or
Emission OFF is set to ON.
•
You must fill out an application to use au Customer
Support (the application can be filled out even after
your cell phone is lost).
46
Page 49
Troubleshooting
Symptom Possible Cause Remedy Page
Cannot turn on
power.
Cannot make calls.
Cannot receive calls.
No response when a
k
ey is pressed.
A warning tone sounds
and po
wer turns off.
Calls are answered
automatically
.
●Is the battery pack charged?
●Did you hold down S for at least one
second?
●Is power tur
●Is
●Is your hand or a metal object covering
the area around the built-in antenna?
● Did you enter the phone number starting
with the area code?
●Is
●Is power turned on? Hold down S for at least one second.
●Is power tur
●Is ther
pack?
●Is Answer memo tur
ned on? Hold down S for at least one second.
(out of range indicator) displayed?
(out of range indicator) displayed?
ned on? Hold down S for at least one second.
e enough power left in the battery
ned on?
Charge the battery pack. 8
Hold down S for at least one second.
Move to a location where
indicator) is no longer displayed, and try
again. Also check the Area Setting.
Make sure your hand or any other metal
object is not covering the area around the
built-in antenna.
When making a call to a phone other than
a cell phone, you need to enter the area
code even if you are inside the same area.
Move to a location where
indicator) is no longer displayed. Also
check the Area Setting.
Charge the battery pack. 8
Hold down R for at least one second to
turn off Answer memo.
(out of range
(out of range
10
10
10, 20
7
15
10, 20
10
10
18
Troubleshooting
47
Page 50
Symptom Possible Cause Remedy Page
Cannot hear the
other par
When making a call,
a beeping sound
is heard from the
ear
connection cannot be
established.
The incoming LED
flashes b
tone does not play.
Cannot charge the
batter
Have difficulty seeing
things on the displa
Troubleshooting
When the camera is
activ
is displayed.
•
ty.
piece and a
ut the ring
y pack.
ated, no subject
For more detailed information, visit the following au troubleshooting sites:
- From an au cell phone: M ⇒ au one Top ⇒
⇒
オンラインマニュアル
- From a PC: http://www.kddi.com/customer/service/au/trouble/kosho/index.html
●Is the earpiece volume too low?
●Is
●Is the wireless line busy or is the phone
●Is manner mode tur
●Is
●Is the batter
●Are the plug and connector of the AC
●Is
y.
●Is a finger or other object covering the
(out of range indicator) displayed?
Or are you in a location where the signal
is too weak?
you are calling on another line?
ned on?
(ring tone off indicator) displayed?
y pack installed properly?
adapter inserted properly?
(Privacy Filter indicator) displayed?
camera (lens)?
auお客さまサポート
(Online Manual) ⇒
故障診断Q&A
Pr
ess A during a call to increase the
earpiece volume.
Move to a location where
indicator) is no longer displayed. Also
check the Area Setting.
End the call and try again later. 15
Hold down T for at least one second to
turn off manner mode.
Increase the volume of the incoming call
ring tone.
Install the battery pack properly.
Insert the plug and connector firmly.
Hold down P for at least one second to
cancel Privacy Filter.
Check the position of the camera (lens)
and r
emove the obstacle.
(au Customer Support)
(Troubleshooting FAQ)
(out of range
17
10, 20
17
18
8
11
32
48
Page 51
Index
Numeric
1Seg ………………………………………………………… 43
A
Accessories …………………………………………………… 6
Answer memo ……………………………………………… 18
Playback…………………………………………………… 18
Turning off ………………………………………………… 18
Turning on ………………………………………………… 18
B
Battery level ………………………………………………… 11
Battery pack………………………………………………… 6,8
Battery pack cover …………………………………………… 7
C
Camera……………………………………………………… 32
Photo taking tips ………………………………………… 32
Taking a photo …………………………………………… 33
Cell phone etiquette…………………………………………… 2
Character input……………………………………………… 22
Character entry modes…………………………………… 22
Deleting characters ……………………………………… 23
Entering characters from the same key………………… 23
Starting a new line………………………………………… 23
Charging the battery pack …………………………………… 8
Checking charges…………………………………………… 37
C-mail………………………………………………………… 31
C-mail safety block ……………………………………… 31
Creating and sending …………………………………… 31
Reading …………………………………………………… 31
Received mail …………………………………………… 31
Contents………………………………………………………… 4
D
Disaster Message Board Service…………………………… 3
Display …………………………………………………… 7,11
Domain ……………………………………………………… 13
Downloading Chaku-Uta
Downloading Chaku-Uta-Full
®
………………………………… 37
®
…………………………… 37
E
Earpiece volume …………………………………………… 17
E-mail………………………………………………………… 28
Creating and sending …………………………………… 28
Initial settings……………………………………………… 10
Reading …………………………………………………… 29
Received mail …………………………………………… 29
Replying…………………………………………………… 29
Viewing attached images………………………………… 29
E-mail address……………………………………………… 10
Available characters……………………………………… 22
Changing ………………………………………………… 13
Entering …………………………………………………… 23
Entering pictograms………………………………………… 24
Evacuate Navi ……………………………………………… 42
EZ Navi……………………………………………………… 40
Index
49
Page 52
EZ Navi Walk………………………………………………… 41
EZ News EX………………………………………………… 38
Canceling ………………………………………………… 39
Changing the Reception Settings ……………………… 39
Info pane…………………………………………………… 11
Setting……………………………………………………… 38
Ticker field………………………………………………… 11
EZ password………………………………………………… 14
EZweb ……………………………………………………… 34
Accessing sites…………………………………………… 35
au one Top………………………………………………… 35
Basic operations ………………………………………… 36
Initial settings……………………………………………… 10
G
Global Function……………………………………………… 20
Calling Japan from Overseas…………………………… 21
Obtaining the Latest PRL (Preferred Roaming List)…20
Setting the Area…………………………………………… 20
I
Incoming history …………………………………………… 16
Indicators …………………………………………………… 11
Initial settings …………………………………………… 10,43
au Media Tuner…………………………………………… 43
E-mail・EZweb…………………………………………… 10
Index
TV (1Seg) ………………………………………………… 43
International Call …………………………………………… 15
Internet ……………………………………………………… 34
Sites……………………………………………………… 35,36
K
Key assignments……………………………………………… 9
L
Language …………………………………………………… 10
Learning the basics…………………………………………… 9
Lock No.……………………………………………………… 14
M
Mail…………………………………………………………… 28
C-mail……………………………………………………… 31
E-mail ……………………………………………………… 28
Mail filters …………………………………………………… 30
Simple settings …………………………………………… 30
Main menu…………………………………………………… 12
Manner mode ……………………………………………… 17
N
Names of parts………………………………………………… 7
Notification window………………………………………… 10
O
One-ring calls ……………………………………………… 16
Outgoing history …………………………………………… 16
50
Page 53
P
Pair Function………………………………………………… 27
Making a call to a pair partner ………………………… 27
Registering a pair partner ……………………………… 27
Sending mail to a pair partner…………………………… 27
Passenger Seat Navi ……………………………………… 40
Passwords…………………………………………………… 14
Phone (call) ………………………………………………… 15
184/186 …………………………………………………… 15
Answering ………………………………………………… 16
International Call ………………………………………… 15
Making……………………………………………………… 15
Returning ………………………………………………… 16
Phone book ………………………………………………… 25
Dialing……………………………………………………… 25
Editing……………………………………………………… 25
Saving……………………………………………………… 25
Saving a phone number from the incoming or outgoing history
Phone number……………………………………………… 10
Photos ……………………………………………………… 32
Photo modes……………………………………………… 32
Taking……………………………………………………… 33
Viewing …………………………………………………… 33
Playback
Answer memo …………………………………………… 18
Premium EZ password …………………………………… 14
Privacy Filter……………………………………………… 11,48
… 26
R
Remote Ctrl Lock…………………………………………… 45
Ring tones
Changing the type………………………………………… 17
Changing the volume …………………………………… 18
S
Security code ……………………………………………… 14
Security Lock Service……………………………………… 46
Security Navi………………………………………………… 40
Signal strength……………………………………………… 11
Sites ………………………………………………………… 35
Bookmarking……………………………………………… 36
Viewing from bookmarks………………………………… 36
Spam………………………………………………………… 30
Sub-display ……………………………………………… 7,12
T
Troubleshooting …………………………………………… 47
Turning on/off power ……………………………………… 10
TV (1Seg)…………………………………………………… 43
Antenna …………………………………………………… 43
Basic operations ………………………………………… 44
Changing channels ……………………………………… 44
Exiting……………………………………………………… 44
Initial settings……………………………………………… 43
V
Viewing
Photos……………………………………………………… 33
Index
51
Page 54
FCC Notice
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note:
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help and for
additional suggestions.
Warning
The user is cautioned that changes or modifications not expressly
approved by the manufacturer could void the user’s authority to operate
the equipment.
52
Warning! Read this information before using your phone.
FCC RF EXPOSURE INFORMATION
In August 1996, the Federal Communications Commission (FCC) of the
United States, with its action in Report and Order FCC 96-326, adopted
an updated safety standard for human exposure to radio frequency
electromagnetic energy emitted by FCC regulated transmitters. Those
guidelines are consistent with the safety standard previously set by
both U.S. and international standards bodies. The design of this phone
complies with the FCC guidelines and these international standards.
Specific Absorption Rate (SAR) for Wireless Phones
The exposure standard for wireless handsets employs a unit of
measurement known as the Specific Absorption Rate, or SAR. The SAR
limit set by the FCC is 1.6 W/kg.
The tests are performed in positions and locations (e.g., at the ear and
worn on the body) as required by the FCC for each model. The highest
SAR value for this model handset when tested for use at the ear is
0.74 W/kg and when worn on the body, as described in this user guide, is
0.857 W/kg.
Body-worn Operation
This device was tested for typical body-worn operations with the back
of the phone kept 0.59 inches (1.5 cm) from the body. To comply with
FCC RF exposure requirements, a minimum separation distance of 0.59
inches (1.5 cm) must be maintained between the user’s body and the
back of the phone, including the antenna. All beltclips, holsters and
similar accessories used by this device must not contain any metallic
components. Body-worn accessories that do not meet these requirements
may not comply with FCC RF exposure limits and should be avoided.
Turn off your phone before flying
You should turn off your phone when boarding any aircraft. To prevent
possible interference with aircraft systems, U.S. Federal Aviation
Administration (FAA) regulations require you to have permission from
a crew member to use your phone while the plane is on the ground. To
prevent any risk of interference, FCC regulations prohibit using your phone
while the plane is in the air.
Page 55
Forinquiries,call:auC ustome rServi ceCente r
Forgeneralinformationandcharges(tollfre e)
Fromfixed-linephones:
PRESSINGZE ROWILLCONNEC TYOUTOANOPERATOR
AFTERCALLING157ONYOURauCELLPHONE
Forloss,theftordamageandoperationinformation
(tollfr ee)
Fromfixed-linephones: Fromaucellphones:
Fromaucel lphones:
areacoden otrequire d
areacoden otrequire d
Incaseabovenumbersarenotavailable,
(exceptOkinawa)
(Okinawa)
FromEZweb:
AccessMethod
EZ▶auoneTop▶auお客さまサポート
(Inquiries)
▶お問い合わせ
・Menusaresubjecttochangewithoutpriornotice.
なるほど!au
みんなでつくる、auQ&Aサイト
AccessMethod
Readthiscodeforaneasy
accesstoなるほど!au
(auUsersForum).
・Thepacketcommunication
chargeapplies.
EZ▶auoneTop▶auお客さまサポート
▶みんなでQ&A「なるほど!au」
▶
(auCustomerSupport)
(auCustomerSupport)
(auUsersForum)
Cellphonea ndPHSoperato rscollectandr ecycleunuse d
telephones,batteriesandbatterychargersatstores
bearingthel ogoregardle ssofbrandandma nufacture r
toprotectth eenvironmenta ndreusevaluab leresources.
Readthiscodefor
aneasyac cessto
auOnlineManual.
Febru ary2010Edi tion
Sales:KD DICORP ORATION
OKINAWACELLULARTELEPHONECOMPANY
Manufacturedby:
•
TOSHIBACORPORATION
Loading...