ATX IMBA-Q870-i2 Quick Installation Manual
1
ATX motherboard supports 22nm LGA1150 Intel® Core™ i7/i5/i3/
Pentium® and Celeron® CPU per Intel® Q87, DDR3, Three
Independent Displays V GA/DVI-I/HDMI/iDP, Dual Intel® GbE, USB 3.0,
SATA 6Gb/s, Audio, iRIS-2400 and RoHS
IMBA-Q870-i2
Quick Installation Guide
Version 1.0
Jun 18, 2015.
Package List
IMBA-Q870-i2 package includ es the follow ing items:
1 x IMBA-Q870-i2 single board computer
1 x I/O shielding (P/N: 45014-0046C0-00-RS)
2 x SATA cable (P/N: 32000-062800-RS)
1 x Utility CD
1 x QIG (Quick Installation Guide)
©2006 Copyright by IEI Integration corp.
All rights reserved.
2
Specifications
CPU:
LGA1150 Intel® 4th generation Core™ i7/i5/i3/Penti um ®/
Celeron® process or supported
System Chipset:
Intel® Q87
Memory:
Four 240-pin 1600/1333MHz dual-channel DDR3 SDRAM
unbuffered DIMMs support up to 32GB
BIOS: UEFI BIOS
Graphic Engine:
Intel® HD Graphics Gen 7.5 support for DX11.1 and OpenCL
1.2, OpenGL 3.2 Full M P EG 2, VC1, AVC Decode
Display Output:
VGA (Up to 1920x1200 @ 60 Hz)
DVI-I (Up to 2560x1600 @ 60 H)
HDMI (Up to 2560x1600 @ 60 Hz)
iDP interface for HDMI, LVDS, VGA, DVI, DP
(Up to 3840x2160 @6 0 H z)
Ethernet:
LAN1: Intel® I210 PCIe controller
LAN2: Intel® I217LM wit h Intel® AMT 9.0 suppor t
Super IO: Fintek F81866
EC:
IWDD
Digital I/O:
8-bit digital I/O (4-bit input / 4-bit output)
Audio:
Realtek ALC662 H D A udio codec (Line-in, Line-out, Mic)
I/O Interface:
5 x RS-232
1 x RS-422/485
6 x SATA 6GB/s
1 x LPT
4 x USB 3.0 (2 on rear, 2 by pin header)
3
8 x USB 2.0 (4 on rear, 4 by pin header)
1 x mSATA (colay SAT A port)
1 x 6-pin wafer for PS/2 K B/M S
Watchdog Timer:
Software program m able support 1~255 sec. system reset
FAN:
1 x 4-pin CPU fan connector
2 x 3-pin system fan co nnectors
Front Panel:
1 x Front Panel
(Power LED, HD D LED, S peaker, Pow er Butt on, Reset Button)
LAN LED:
2 x 2-pin (1x2) header for LAN1 LED, LAN2 LED
Front Audio:
1 x 10-pin (2x5) header
TPM:
1 x 20-pin (2x10) header
SMBus:
1 x 4-pin (1x4) wafer
I2C:
1 x 4-pin (1x4) wafer
IPMI:
1 x DDR3 SO-DIMM slot supports iRIS-2400
Expansion:
1 x PCIe x16 slot
1 x PCIe x1 slot
1 x PCIe x4 slot (with PCIe x1 signal)
4 x PCI slots
Power supply: ATX P ower Supply
Power Consumption:
3.3V@0.66A, 5 V@4.3 4A, 12V@ 0.16 A, Vcor e@4.01 A,
5VSB@0.21A
(Intel® 2.60GHz CPU with four 1333M Hz 2GB DDR 3 memory)
Operation Temperat ur e:
-20°C ~ 60°C
Operation Humidity: 5% ~ 95%, non-condensing
Dimensions: 244mm x 305mm
Weight GW/NW: 1200g / 700g
4
Ordering Information
ATX motherboard supports 22nm LGA1150 Intel® Core™ i7/i5/
IMBA-Q870-i2-R10:
i3/Pentium® and Celeron® CPU per Intel® Q87, DDR3, Three
Independent Displays VGA/DVI-I/HDMI/iDP, Dual Intel® GbE,
USB 3.0, SATA 6Gb/s, Audio, iRIS-2400 and RoHS
19800-003100-200-RS:
Dual ports USB cable with bracket
19800-010500-100-RS:
USB 3.0 cable with bracket
32205-003800-100-RS:
RS-422/485 cable, 200mm
19800-000051-RS:
RS-232 cable, 230mm (P=2.54)
32102-000100-200-RS:
SATA power cable, MOLEX 5264-4P to SATA15P
19800-000075-RS:
PS/2 KB/MS Y-cable with bracket, 220mmz
19800-000049-RS:
LPT Cable
CF-1156A-RS-R11:
High performance LGA1155/LGA1156 cooler kit, 1U chassis
compatible, 73W
CF-1156E-R11:
High performance LGA1155/LGA1156 cooler kit, 95W
DP-LVDS-R10:
DisplayPort to 24 bit dual channel LVDS converter board
(For iEi IDP connector)
DP-HDMI-R10:
DisplayPort to HDMI converter board (For iEi IDP connector)
DP-DVI-R10:
DisplayPort to DVI-D converter board (For iEi IDP connector)
DP-VGA-R10:
DisplayPort to VGA converter board (For iEi IDP connector)
DP-DP-R10:
DisplayPort to DisplayPort converter board (For iEi IDP connector)
TPM-IN01-R11:
tool, firmware V3.17
20-Pin Infineon TPM module, software management
5
Jumpers setting and connectors
LABEL FUNCTION
J_ATX_AT1 AT/ATX mode select switch
J_CMOS1 Clear CMOS button
PCIE x16 Power PCIEX16 channel mode setting
USB SW1, USB SW2 USB power setting
J_FLASH1 Flash descriptor security override
BAT1 Battery connector
CHASSIS1 Chassis status connector
CPU_FAN1 CPU fan connector
CPU12V1 +12V power source connector
ATX1 24-pin ATX power source connector
CHA_DIMM1, CHA_DIMM2
CHB_DIMM1, CHB_DIMM2
DDR3 DIMM slots
DIO1 Digital I/O connector
DP1 Display port connector
F_PANEL1 Front panel connector
FRONT_PANEL1 Front panel audio connector
IPMI1 Collocation IPMI module (iRIS-2400)
CN5 I2C Connector
KB_MS1 Keyboard and mouse connector
LED_LAN1 LAN1 link LED connector
LED_LAN2 LAN2 link LED connector
LPT1 Internal parallel port connector
CN2 M-SATA card connector
COM2, COM3, COM5, COM6 Internal RS-232 serial port connectors
COM4 Internal RS-422/485 serial port connector
SATA1, SATA2, SATA3
SATA4, SATA5, SATA6
Serial ATA 3.0 connectors
CN1 SMBUS connector
SPDIF1 SPDIF connector
SYS_FAN1, SYS_FAN2 System fan connector
TPM1 TPM connector
USB1, USB2
Internal USB 2.0 connectors
6
CN4 Internal USB 3.0 connector
AUDIO_CV1 HD audio connector
COM1 External RS-232 serial port connector
LAN1_USB1
RJ45 LAN and USB 3.0 connectors
LAN2_USB2
RJ45 LAN and USB 2.0 connectors
K/M_USB1
Keyboard & Mouse and USB 2.0 connectors
HDMI1 HDMI connector
VIDEO1 VGA and DVI-I connectors
J_FLASH1: Flash descriptor security override
PIN NO.
DESCRIPTION
Short 1 - 2
Disabled (default)
Short 2 - 3
Enabled
J_CMOS1: Clear CMOS button
PIN NO.
DESCRIPTION
NC (default)
Keep CMOS Setup
(Normal Operation)
Press button
Clear CMOS Setup
J_ATX_AT1: AT/ATX mode select switch
PIN NO. DESCRIPTION
Short 1 - 2 ATX Mode (default)
Short 2 - 3 AT Mode
Loading...