ATX DYNANO1, DYNANO2, DYNANO1E, DYNANO2E Installation & Operation Manual

DV ISn

Patent Pending

DVISn - Nano-sized Digital Video Insertion System
RF Output

INSTALLATION & OPERATION MANUAL

www.atxnetworks.com

www.atxnetworks.com

Although every effort has been taken to ensure the accuracy of this document it may be necessary, without notice, to make amendments or correct omissions.

Specications subject to change without notice.

MDU Solutions®, UCrypt®, DigiVu® and VersAtive®Pro are registered trademarks of ATX in the United States and/or other countries. Products or features contained
herein may be covered by one or more U.S. or foreign patents. Other non-ATX product and company names mentioned in this manual are the property of their respective
companies.

TABLE OF CONTENTS

Page

1. SAFETY ...................................................................................................................................1-1

2. PRODUCT OVERVIEW ...........................................................................................................2-1

2.1 DVISn Functional Diagram ............................................................................................2-1

2.2 Theory of Operation .......................................................................................................2-2

2.3 Components and Interfaces...........................................................................................2-3

2.4 Specications .................................................................................................................2-4

3. SET-UP AND CONFIGURATION .............................................................................................3-1

3.1 Connect PC to DVISn ....................................................................................................3-1

3.2 Conguration .................................................................................................................3-3

3.3 RF Output Connections .................................................................................................3-4

3.4 Legacy Set-Top Box Settings.........................................................................................3-4

4. FIRMWARE UPGRADE INSTRUCTIONS ...............................................................................4-1

4.1 Save Firmware Update to PC .......................................................................................4-1

4.2 Connect PC to DVIS/DVISn...........................................................................................4-1

5. SERVICE & SUPPORT ............................................................................................................5-1

5.1 Contact ATX Networks ...................................................................................................5-1

5.2 Warranty Information .....................................................................................................5-1

MDU Solutions® – DVIS Nano – Nano-sized Digital Video Insertion System RF Output Installation & Operation Guide i

Index of Figures

Page

Figure 1: Insertion into Blank QAM ...................................................................................................................2-2

Figure 2: Insertion into QAM at Band Edge ......................................................................................................2-2

Figure 3: DVISn Unit .........................................................................................................................................2-3

Figure 4: Input Connections ..............................................................................................................................2-3

Index of Tables

Page

Table 1: Specications ...................................................................................................................2-4

ii MDU Solutions® – DVIS Nano - Nano-sized Digital Video Insertion System RF Output – Installation & Operation Manual

SAFETY

1. Safety

WARNING! FAILURE TO FOLLOW THE SAFETY PRECAUTIONS LISTED BELOW MAY RESULT IN PROPERTY DAMAGE
OR PERSONAL INJURY. PLEASE READ AND COMPLY WITH THE FOLLOWING:

WATER AND MOISTURE: Care should be taken to prevent entry of splashed or dripping water, other liquids, and physical

objects through enclosure openings.

DAMAGE: Do not operate the device if damage to any components is suspected.

POWER SOURCES: Only connect the unit to a power supply of the type and capacity specied in the operating instructions

or as marked on the device.

GROUNDING OR POLARIZATION: Electrical grounding and polarization means must not be defeated.

POWER CORD PROTECTION: Route power supply cord to prevent damage by external objects. Pay particular attention to

the exit point from the device and plug.

FUSING: If your device is equipped with a fused receptacle, replace only with the same type fuse. Refer to replacement text
on the unit for correct fuse type.

CHAPTER 1: SAFETY

SERVICE: Do not attempt to service the device beyond procedures provided the operating instructions. All other servicing

should be referred to qualied service personnel.

MODIFICATIONS: Modications should not be made to the device or any of its components for applications other than those
specied in the operating instructions.

SAFETY CODES AND REGULATIONS: The device should be installed and operated in compliance with all applicable local
safety by-laws, codes and regulations.

MDU Solutions® – DVIS Nano - Nano-sized Digital Video Insertion System RF Output – Installation & Operation Manual 1-1

CHAPTER 1: SAFETY

This page intentionally left blank.

1-2 MDU Solutions® – DVIS Nano - Nano-sized Digital Video Insertion System RF Output – Installation & Operation Manual