Attwood Rip Guard Boat Cover Protectors User Manual

®®

3

“Rip Guard” Boat Cover Protectors 10708

Form Number 69286 Rev. B 03-10

FEATURES

Helps protect boat cover from ripping on sharp edges. Overall dimensions: 12" long, 1¹⁄₄" inside diameter

INSTALLATION INSTRUCTIONS

Determine the location of sharp edges, windshield corners, walk-throughs etc.

1. Open slit in corrugated tubing and slide over edges of windshield frame. Bend to wrap around corners.

2. Install and secure cover. Remove protectors after removing cover.

3

“Rip Guard” Boat Cover Protectors 10708

Form Number 69286 Rev. B 03-10

FEATURES

Helps protect boat cover from ripping on sharp edges. Overall dimensions: 12" long, 1¹⁄₄" inside diameter

INSTALLATION INSTRUCTIONS

Determine the location of sharp edges, windshield corners, walk-throughs etc.

1. Open slit in corrugated tubing and slide over edges of windshield frame. Bend to wrap around corners.

2. Install and secure cover. Remove protectors after removing cover.

®

3

“Rip Guard” Boat Cover Protectors 10708

Form Number 69286 Rev. B 03-10

FEATURES

Helps protect boat cover from ripping on sharp edges. Overall dimensions: 12" long, 1¹⁄₄" inside diameter

INSTALLATION INSTRUCTIONS

Determine the location of sharp edges, windshield corners, walk-throughs etc.

1. Open slit in corrugated tubing and slide over edges of windshield frame. Bend to wrap around corners.

2. Install and secure cover. Remove protectors after removing cover.

®

3

“Rip Guard” Boat Cover Protectors 10708

Form Number 69286 Rev. B 03-10

FEATURES

Helps protect boat cover from ripping on sharp edges. Overall dimensions: 12" long, 1¹⁄₄" inside diameter

INSTALLATION INSTRUCTIONS

Determine the location of sharp edges, windshield corners, walk-throughs etc.

1. Open slit in corrugated tubing and slide over edges of windshield frame. Bend to wrap around corners.

2. Install and secure cover. Remove protectors after removing cover.