Attwood Lift Ring User Manual

®

3

66120 Form No. 69348 Rev. B 03-11

®

3

66120 Form No. 69348 Rev. B 03-11

WARNING

Lift rings are designed to lift a boat only when fastened to the boat structure. The maximum lifting load figures listed are determined by applying a test load in the direction of the eye shank axis, with the shank fixed in an immovable testing device. Listed lifting loads are for reference only. No guarantee of actual lifting performance is made.

Attwood’s new stern-mounted lift ring provides heavy-duty strength for boats lifted by davits, cranes or shore stations. Lifts a maximum vertical load of 12,000 lbs. Installs with 1/2" slotted or hex flat countersunk stainless steel screws which must be through bolted with stainless steel washers (1.5" minimum O.D.) and nylock nuts.

WARNING

Lift rings are designed to lift a boat only when fastened to the boat structure. The maximum lifting load figures listed are determined by applying a test load in the direction of the eye shank axis, with the shank fixed in an immovable testing device. Listed lifting loads are for reference only. No guarantee of actual lifting performance is made.

Attwood’s new stern-mounted lift ring provides heavy-duty strength for boats lifted by davits, cranes or shore stations. Lifts a maximum vertical load of 12,000 lbs. Installs with 1/2" slotted or hex flat countersunk stainless steel screws which must be through bolted with stainless steel washers (1.5" minimum O.D.) and nylock nuts.

®

3

66120 Form No. 69348 Rev. B 03-11

®

3

66120 Form No. 69348 Rev. B 03-11

WARNING

Lift rings are designed to lift a boat only when fastened to the boat structure. The maximum lifting load figures listed are determined by applying a test load in the direction of the eye shank axis, with the shank fixed in an immovable testing device. Listed lifting loads are for reference only. No guarantee of actual lifting performance is made.

Attwood’s new stern-mounted lift ring provides heavy-duty strength for boats lifted by davits, cranes or shore stations. Lifts a maximum vertical load of 12,000 lbs. Installs with 1/2" slotted or hex flat countersunk stainless steel screws which must be through bolted with stainless steel washers (1.5" minimum O.D.) and nylock nuts.

WARNING

Lift rings are designed to lift a boat only when fastened to the boat structure. The maximum lifting load figures listed are determined by applying a test load in the direction of the eye shank axis, with the shank fixed in an immovable testing device. Listed lifting loads are for reference only. No guarantee of actual lifting performance is made.

Attwood’s new stern-mounted lift ring provides heavy-duty strength for boats lifted by davits, cranes or shore stations. Lifts a maximum vertical load of 12,000 lbs. Installs with 1/2" slotted or hex flat countersunk stainless steel screws which must be through bolted with stainless steel washers (1.5" minimum O.D.) and nylock nuts.