AT&T MA357 User Manual

MA357

Cordless Phone

Start Here>

Welcome

Congratulations! Experience the freedom of your Motorola MA357 cordless phone.

Adjust volume during a call

Format phone number to include/omit area code or 1+ area code

Turn handset ringer on (up) or off (down)

Mute/unmute microphone, delete phone numbers

Chan: Use if you hear interference or static

Talk: Make/answer calls, hang up

Scroll up/down

Earphone jack

Mem: Store numbers in memory

Flash: Enter setup

lmn

Put call on hold

Redial

Welcome

For a copy of a large-print version of this guide, or

for product-related questions, please contact:

1-800-353-2729 U.S.A.

On the web, please refer to: www.motorola.com/cordless

Congratulations on your purchase of a Motorola product!

Product registration is an important step toward enjoying your new Motorola product. Registering helps us facilitate warranty service, and permits us to contact you if your Motorola product

Welcome

requires an update or other service. Registration is not required for warranty coverage. To register your product online, visit www.motorola.com/warranty/cordless.

Please retain your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to

1-888-390-6456 TTY (Text Telephone)

1-800-461-4575 Canada

provide a copy of your dated sales receipt to confirm warranty status.

MOTOROLA, the Stylized M Logo, and all other trademarks indicated as such herein are trademarks of Motorola, Inc. ® Reg. U.S. Pat. & Tm. Off.

Welcome

FCC and Interference

Information . . . . . . . . . . . . . 6

Important Safety

Instructions . . . . . . . . . . . . 13

Installing the Belt Clip . . . . . 18

Battery Safety Instructions . 19

Charging the Battery. . . . . . 20

Installing the Phone on

a Desk . . . . . . . . . . . . . . . . 23

Installing the Phone on

a Wall . . . . . . . . . . . . . . . . 24

Setting a Wildlife Ring

Sound on the Base . . . . . . 28

Contents

Setting the Base Ring

Volume . . . . . . . . . . . . . . . .30

Setting Up the Phone . . . . . .30

How to Find a Lost

Handset. . . . . . . . . . . . . . . .35

Storing a Number in

Memory . . . . . . . . . . . . . . . .35

Storing a Caller ID Number

in Memory . . . . . . . . . . . . . .37

Dialing a Number from

Memory . . . . . . . . . . . . . . . .37

Reviewing and Deleting

Numbers from Memory . . . .38

Contents

Reviewing Caller ID Calls . . 39 Dialing a Number from

Caller ID. . . . . . . . . . . . . . . 39

Deleting a Number from

the Caller ID List . . . . . . . . 40

Deleting All Numbers from

the Caller ID List . . . . . . . . 40

Storing and Calling

Emergency Numbers. . . . . 41

Troubleshooting. . . . . . . . . . 42

Warranty . . . . . . . . . . . . . . . 46

Contents

FCC and Interference Information

This equipment complies with Parts 15 and 68 of the FCC rules and the requirements adopted by the Administrative Council for Terminal Attachments (ACTA).

A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details.

Notification of the Local Telephone Company

On the bottom of this equipment is a label that contains, among other information, a product identifier in the form US:AAAEQ##TXXXX. You must, upon request, provide this

FCC and Interference

information to your telephone company.

The digits represented by ## in the product identifier indicate the Ringer Equivalency Number (REN) for this equipment. The REN is useful in determining the number of devices you may connect to your telephone line and still have all of these devices ring when your telephone number is called. In most (but not all) areas, the sum of the RENs of all devices connected to one line should not exceed 5. To be certain of the number of devices you may connect to your line as determined by the REN, contact your local telephone company.

Notes:

• This equipment may not be used on coin service provided by the telephone company.

• Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission or corporation commission for information.

FCC and Interference

• If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this cordless phone does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer.

• Notice must be given to the telephone company upon permanent disconnection of your telephone from your line.

• The FCC requires that you connect your cordless telephone to the nationwide telephone network through a modular telephone jack (USOC RJ11C/RJ11W or RJ14C/RJ14W).

Rights of the Telephone Company

Should your equipment cause trouble on your line which may harm the telephone network, the telephone company shall, where practicable, notify you that temporary discontinuance of service may be required. Where prior

FCC and Interference

notice is not practical and the circumstances warrant such action, the telephone company may temporarily disconnect service immediately. In case of such temporary discontinuance, the telephone company must:

(1) Promptly notify you of such temporary discontinuance; (2) Afford you the opportunity to correct the situation; (3) Inform you of your right to bring a complaint to the Commission pursuant to procedures set forth in Subpart E of Part 68, FCC Rules and Regulations.

The telephone company may make changes in its facilities, equipment, operations, or procedures that could affect the operation of the equipment. If this happens, the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service.

FCC and Interference

Interference Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

• This device may not cause harmful interference; and

• This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio

FCC and Interference

communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment on and off, the user is encouraged to try to correct the interference with one or more of the following measures:

• Reorient or relocate the receiving antenna (that is, the anten-

na for the radio or television that is “receiving” the interference).

• Reorient or relocate and increase the separation between the

telecommunications equipment and the receiving antenna.

• Connect the telecommunications equipment into an outlet on

a circuit different from that to which the receiving antenna is connected.

FCC and Interference

If these measures do not eliminate the interference, please consult your dealer or an experienced radio/television technician for additional suggestions. Also, the Federal Communications Commission has prepared a helpful booklet, “How to Identify and Resolve Radio/TV Interference Problems.” This booklet is available from the U.S. Government Printing Office, Washington, D.C. 20402. Please specify stock number 004-000-00345-4 when ordering copies.

The FCC requires this product to be serviced only by Motorola or its authorized service agents. Changes or modifications not expressly approved by Motorola could void not only the user's authority to operate the equipment, but also the limited warranty.

Hearing Aid Compatibility

This telephone system meets the FCC standards for hearing

FCC and Interference

aid compatibility.

Important Safety Instructions

Follow these safety precautions when using your cordless phone to reduce the risk of fire, electric shock and injury to persons or property:

Reduce risk of fire and shock by

1. Keep all slits and openings of the phone unblocked. Do

not set the phone on a heating register or over a radiator. Ensure that proper ventilation is provided at the installation site.

2. Do not use while wet or while standing in water.

3. Do not use this product near water (for example, near a

bath tub, kitchen sink, or swimming pool).

4. Do not allow anything to rest on the power cord. Place

the power cord so that it will not be walked on.

Safety Instructions

5. Never insert objects of any kind into the product slits as

that may result in fire or shock.

6. Unplug this product from the wall outlet before cleaning.

Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

7. Do not disassemble this product. If service or repair

work is required, contact the Motorola address found in the back of this user’s guide.

8. Do not overload wall outlets and extension cords.

9. Avoid using during an electrical storm. Use a surge pro-

tector to protect the equipment.

10. Do not use this cordless phone to report a gas leak,

especially if you are in the vicinity of the gas line.

Safety Instructions

Unplug this cordless phone immediately from an outlet

if:

• The power cord or plug is damaged or frayed.

• Liquid has been spilled into the product.

• The product has been exposed to rain or water. Do not

retrieve the handset or base until after you have unplugged the power and phone from the wall. Then retrieve the unit by unplugged cords.

• The product has been dropped or the cabinet has been

damaged.

• The product exhibits a distinct change in performance.

Safety Instructions

Installation Guidelines

1. Read and understand all instructions and save them for

future reference.

2. Follow all warnings and instructions marked on the

product.

3. Do not install this product near a bath tub, sink or

shower.

4. Operate this phone using only the power source that is

indicated on the marking label. If you are unsure of the power supply to your home, consult with your dealer or local power company.

5. Do not place this product on an unstable cart, stand or

table. This product may fall, causing serious damage to the product.

Safety Instructions

+ 42 hidden pages