AT&T EL50003, EL50013 User Manual
User’s manual
TONE
EL50003/EL50013
DECT 6.0 expansion handset
for use with AT&T models
EL52103/EL52113/EL52203/
EL52213/EL52253/EL52303/
EL52313/EL52353/EL52403/
EL52503
Congratulations
on your purchase of this AT&T product. Before using this AT&T
product, please read the Important safety information section on
pages 21-23 of this manual. For complete instructions, please
refer to the manual provided with your EL52103/EL52113/EL52203/
EL52213/EL52253/EL52303/EL52313/EL52353/EL52403/EL52503
telephone. You can also visit our website at
www.telephones.att.com or call 1 (800) 222-3111.
In Canada, dial 1 (866) 288-4268.
Model number: EL50003/EL50013
Type: DECT 6.0 expansion handset
Serial number:
Purchase date:
Place of purchase:
Both the model and serial numbers of your AT&T product can be
found on the bottom of the telephone base.
Save your sales receipt and original packaging in case it is
necessary to return your telephone for warranty service.
The ENERGY STAR® program (www.energystar.gov) recognizes and
encourages the use of products that save energy and help protect
our environment. We are proud to supply this product with an
ENERGY STAR® qualified power adapter meeting the latest energy
efficiency guidelines.
© 2012-2013 Advanced American Telephones. All Rights Reserved. AT&T and
the AT&T logo are trademarks of AT&T Intellectual Property licensed to
Advanced American Telephones, San Antonio, TX 78219. Printed in China.
Parts checklist
TONE
BT162342/BT262342
TONE
Your telephone package contains the following items. Save your
sales receipt and original packaging in the event warranty service
is necessary.
User’s manual
EL50003/EL50013
DECT 6.0 expansion handset
for use with AT&T models
EL52103/EL52113/EL52203/
EL52213/EL52253/EL52303/
EL52313/EL52353/EL52403/
EL52503
User’s manual
Battery for
cordless handset
Cordless handset
Battery
compartment
cover
Charger for cordless
handset with power
adapter installed
User’s manual
TONE
EL50003/EL50013
DECT 6.0 expansion handset
for use with AT&T models
EL52103/EL52113/EL52203/EL52213/
EL52253/EL52303/EL52313/EL52353/
EL52403/EL52503
Table of contents
Getting started
Installation ...................................................................................................................1
Quick reference guide ...........................................................................................2
Charger installation .................................................................................................5
Battery installation and charging .....................................................................6
Registration and deregistration
Adding and registering handsets .....................................................................9
Register a handset to your telephone base ..........................................9
Deregistering handsets ......................................................................................11
Deregister all handsets from your telephone base .........................11
Appendix
Troubleshooting .....................................................................................................12
Maintenance.............................................................................................................20
Important safety information ..........................................................................21
Safety information.............................................................................................21
Especially about cordless telephones .....................................................22
Precautions for users of implanted cardiac pacemakers ..............23
Pacemaker patients ..........................................................................................23
ECO mode .............................................................................................................23
Especially about telephone answering systems ................................23
FCC Part 68 and ACTA........................................................................................24
FCC Part 15 ..............................................................................................................26
Limited warranty ....................................................................................................27
Technical specifications .....................................................................................30
DECT 6.0 digital technology .........................................................................30
Telephone operating range ..........................................................................30
Getting started
Installation
You must install and
charge the battery before
using the telephone.
Your product may be shipped with a protective sticker covering the
handset display - remove it before use.
For customer service or product information, visit our website at
STOP!
See pages 6-8
for easy instructions.
www.telephones.att.com or call 1 (800) 222-3111.
In Canada, dial 1 (866) 288-4268.
Avoid placing the telephone base too close to:
Communication devices such as television sets, VCRs, or other
•
cordless telephones.
Excessive heat sources.
•
Noise sources such as a window with traffic outside, motors,
•
microwave ovens, refrigerators, or fluorescent lighting.
Excessive dust sources such as a workshop or garage.
•
Excessive moisture.
•
Extremely low temperature.
•
Mechanical vibration or shock such as on top of a washing
•
machine or workbench.
1
Getting started
TON E
Quick reference guide
CHARGE light
On when the handset is charging in the
telephone base or charger.
DIR/VOLUME
Press to scroll up while in menus.
•
Press to increase the listening volume.
•
Press to show directory entries when the
•
handset is not in use.
When entering names or numbers in the
•
directory, press to move the cursor to the
right.
REDIAL/PAUSE
Press repeatedly to view the last ten number
•
dialed.
While entering numbers, press and hold to
•
insert a dialing pause.
PHONE/FLASH
Press to make or answer a call.
•
During a call, press to answer an incoming
•
call when you receive a call waiting alert.
1
While reviewing a caller ID log entry, press
•
repeatedly to add or remove 1 in front of the
telephone number before dialing or saving it
in the directory.
Press and hold to set or dial your voicemail
•
number.
TONE
Press to switch to tone dialing temporarily
during a call if you have pulse service.
/SPEAKER
Press to turn on the handset speakerphone,
press again to resume normal handset use.
2
Getting started
TON E
Quick reference guide
CID/volume
Press to scroll down while in menus.
•
Press to decrease the listening volume.
•
Press to show the caller ID log when the
•
handset is not in use.
While entering names or numbers in the
•
directory, press to move the cursor to the
left.
MENU/SELECT
Press to display the menu.
•
Once in the menu, press to select an item or
•
save an entry or setting.
OFF/CANCEL
During a call, press to hang up.
•
While using menus, press to cancel an
•
operation, back up to the previous menu, or
exit the menu display, or press and hold to
exit to idle mode.
Press and hold while the handset is not in
•
use to erase the missed call indicator.
QUIET#
Press and hold to set and turn on the quiet
•
mode, or turn it off.
When reviewing a caller ID log entry, press
•
repeatedly to view other dialing options.
MUTE/DELETE
During a call, press to mute the microphone.
•
While predialing, press to erase digits.
•
While reviewing the redial list, directory,
•
speed dial list or caller ID log, press to
delete an individual entry.
INT
Press to initiate an intercom conversation or
transfer a call.
3
Getting started
Quick reference guide
Main menu
Play messages
ECO
Main menu
Play messages
Answering sys
Directory
Caller ID log
Ringers
Set date/time
Settings
Web address
Using menus:
Press MENU/SELECT to show
•
the menu.
Press qCID or pDIR to scroll
•
through menu items.
Press MENU/SELECT to confirm
•
or save changes to a highlighted
menu item.
Press OFF/CANCEL to cancel an
•
operation, back up to the previous
menu, or exit the menu display.
For complete instructions, refer to the manual provided with
your EL52103/EL52113/EL52203/EL52213/EL52253/EL52303/
EL52313/EL52353/EL52403/EL52503 telephone system. If you are
unable to find your manual, go to
www.telephones.att.com/manuals to read and/or download
the manual.
4
Getting started
Charger installation
Install the charger as shown below.
Plug the power adapter into an
electrical outlet not controlled by
a wall switch.
IMPORTANT INFORMATION
1. Use only the power adapter supplied with this product. To order a replacement
power adapter, visit our website at www.telephones.att.com or call
1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.
2. The power adapter is intended to be correctly oriented in a vertical or floor
mount position. The prongs are not designed to hold the plug in place if it is
plugged into a ceiling, under-the-table or cabinet outlet.
5
Getting started
Battery installation and charging
Install the battery as shown on page 7. Once you have installed
the battery, the screen indicates the battery status (see the table
below). If necessary, place the handset in the telephone base or
charger to charge the battery. For best performance, keep the
handset in the telephone base or charger when not in use. The
battery is fully charged after 16 hours of continuous charging. See
the table on page 30 for battery operating times.
If the screen shows Place in charger and flashes, you need to
charge the handset without interruption for at least 30 minutes to
give the handset enough charge to use the telephone for a short
time. The following table summarizes the battery charge indicators
and actions to take.
Battery indicators Battery status Action
The screen is blank, or
shows Put in charger
and (flashing).
Battery has no or
very little charge. The
handset cannot be used.
Charge without interruption
(at least 30 minutes).
The screen shows
Low battery and
(flashing).
The screen shows
HANDSET X.
NOTE: If you are on a phone call in low battery mode, you hear four short
beeps every 50 seconds.
Battery has enough
charge to be used for a
short time.
Battery is charged. To keep the battery
6
Charge without interruption
(at least 30 minutes).
charged, place it in the
telephone base or charger
when not in use.
Getting started
TONE
TONE
BT162342/BT262342
BT162342/BT262342
Battery installation and charging
Plug the battery
1. Insert the supplied
connector securely
into the socket
inside the handset
battery compartment,
matching the
orientation of the
engraved label.
CHARGE light
2. Align the cover
battery with the
label THIS SIDE
UP facing up as
indicated.
3.
flat against
the battery
compartment,
then slide it
upwards until it
clicks into place.
Charge the handset by
4.
placing it face up in the
telephone base or charger.
The CHARGE light is on
when charging.
To replace the battery, press
the tab and slide the battery
compartment cover downwards.
Lift out the old battery and
disconnect it from the handset.
Follow the instructions above to
install and charge a new battery.
7
Loading...