AT&T CRL30102 User Manual

User’s manual

CRL30102
DECT 6.0 expansion handset
for use with AT&T models

CRL32102/CRL32202/CRL32302/
CRL32352/CRL32452

Congratulations

on your purchase of this AT&T product. Before using this AT&T
product, please read the Important safety information section on
pages 20-22 of this manual. For complete instructions, please
refer to the manual provided with your CRL32102/CRL32202/
CRL32302/CRL32352/CRL32452 telephone. You can also visit our
website at www.telephones.att.com or call

1 [phone]. In Canada, dial 1 [phone].

Model number: CRL30102
Type: DECT 6.0 expansion handset

Serial number: ________________________________________________

Purchase date: ________________________________________________

Place of purchase: _______________________________________________

Both the model and serial numbers of your AT&T product can be
found on the bottom of the charger.

Save your sales receipt and original packaging in case it is
necessary to return your telephone for warranty service.

Telephones identified with this logo have reduced noise and
interference when used with most T-coil equipped hearing aids and
cochlear implants. The TIA-1083 Compliant Logo is a trademark of
the Telecommunications Industry Association. Used under license.

© 2012 Advanced American Telephones. All Rights Reserved. AT&T and
the AT&T logo are trademarks of AT&T Intellectual Property licensed to
Advanced American Telephones, San Antonio, TX 78219. Printed in China.

The ENERGY STAR® program (www.energystar.gov) recognizes and
encourages the use of products that save energy and help protect
our environment. We are proud to mark this product with the
ENERGY STAR® label indicating it meets the latest energy
efficiency guidelines.

T

Compatible with

Hearing Aid T-Coil

TIA-1083

Parts checklist

Your telephone package contains the following items. Save your
sales receipt and original packaging in the event warranty service
is necessary.

Battery for
cordless handset

Cordless handset

Charger for cordless
handset with power
adapter installed

Battery
compartment
cover

User’s manual

User’s manual

CRL30102
DECT 6.0 expansion handset
for use with AT&T models
CRL32102/CRL32202/CRL32302/
CRL32352/CRL32452

BY 1021

BT183342/BT283342

2.4V 400mAh Ni-MH

User’s manual

CRL30102
DECT 6.0 expansion handset
for use with AT&T models
CRL32102/CRL32202/CRL32302/
CRL32352/CRL32452

Table of contents

Getting started

Installation .......................................1

Quick reference guide -

handset..........................................2

Charger installation .....................5

Battery installation and

charging ........................................6

Registration and
deregistration

Adding and registering

handsets .......................................8

Register a handset to your

telephone base..........................8

Deregistering handsets .......... 10

Deregister all handsets

from your telephone base ... 10

Appendix

Troubleshooting ......................... 11

Maintenance................................. 19

Important safety information ... 20

Safety information.................20

Especially about cordless

telephones ................................ 21

Precautions for users

of implanted cardiac

pacemakers .............................. 22

Pacemaker patients .............. 22

Especially about telephone

answering systems ...............22

FCC Part 68 and ACTA............ 23

FCC Part 15 .................................. 25

Limited warranty ........................ 26

Technical specifications .........29

DECT 6.0 digital

technology ................................ 29

Telephone operating

range ........................................... 29

Redefining long range

coverage and clarity ............ 29

HD audio .................................... 29

1

See pages 6-7

for easy instructions.

You must install and
charge the battery before
using the telephone.

STOP!

Installation

Your product may be shipped with a protective sticker covering the
handset display - remove it before use.

For customer service or product information, visit our website at

www.telephones.att.com or call 1 [phone].

In Canada, dial 1 [phone].

Avoid placing the telephone base too close to:

Communication devices such as television sets, VCRs, or other
cordless telephones.

Excessive heat sources.
Noise sources such as a window with traffic outside, motors,

microwave ovens, refrigerators, or fluorescent lighting.
Excessive dust sources such as a workshop or garage.
Excessive moisture.
Extremely low temperature.
Mechanical vibration or shock such as on top of a washing

machine or workbench.

•

•

•

•

•

•

•

Getting started

Quick reference guide - handset

CHARGE indicator

On when the handset is charging in the telephone
base or charger.

/SPEA�ERSPEA�ER

Press to switch between the speakerphone and
the handset.

Getting started

TONE

Press to switch to tone dialing temporarily during
a call if you have pulse service.

REDIAL/PAUSE

Press repeatedly to view the last 10 numbers dialed.
While entering numbers, press and hold to insert

a dialing pause.

2

MUTE/DELETE

During a call, press to mute the microphone.
While reviewing the caller ID history, the

directory or the redial memory, press to delete
an individual entry.

While predialing, press to delete digits.
While editing numbers or names in the

directory, press to delete digits or characters, or
press and hold to delete all digits or characters.

PHONE/FLASH

Press to make or answer a call.
During a call, press to answer an incoming call

when you receive a call waiting alert.

1

While reviewing a caller ID log entry, press
repeatedly to add or remove 1 in front of the
telephone number before dialing or saving it in
the directory.

Press and hold to set or to dial your voicemail
number when the handset is not in use.

Incoming call light

Flashes when there is a incoming call or when the
base is paging the handset.

Quick reference guide - handset

Getting started

QUIET # (pound key)

Press repeatedly to display other dialing
options when reviewing a caller ID log entry.

OFF/CANCELOFF/CANCEL

During a call, press to hang up.
While in menus, press to cancel an operation,

back up to the previous menu, or exit the
menu display, or press and hold this key to exit
to idle mode.

Press and hold while the telephone is not in use
to erase the missed call indicator.

MENU/SELECT

When the handset is not in use, press to show
the menu.

While in the menu, press to select an item or
save an entry or setting.

pDIR/VOLUME

Press pDIR to show directory entries when
the handset is not in use.

Press to scroll up while in menus.
While entering names or numbers, press to

move the cursor to the right.
Press to increase the listening volume during a

call or message playback.

3

qCID/VOLUME

Press qCID to show the caller ID history when
the handset is not in use.

Press to scroll down while in menus.
While entering names or numbers, press to

move the cursor to the left.
Press to decrease the listening volume during

a call or message playback.

AUDIO ASSIST

During a call, press to enhance the clarity and
loudness of your caller’s voice.

Audio Assist is a registered trademark of Advanced American Telephones.

Quick reference guide - handset

Getting started

The > symbol highlights
a menu item.

Main menu

Play messages
Answering sys
Directory
Caller ID log

Intercom
Ringers
Set date/time
Settings
Web address

•

•

•

•

•

•

•

•

•

Using menus:

Press MENU/SELECT to show the menu.
Press qCID or pDIR to scroll through menu items.
Press MENU/SELECT to confirm or save changes to a highlighted

menu item.
Press OFF/CANCEL to cancel an operation, back up to the

previous menu, or exit the menu display.

For complete instructions, refer to the user’s manual provided
with your CRL32102/CRL32202/CRL32302/CRL32352/CRL32452
telephone system.

If you are unable to find your user’s manual, go to

www.telephones.att.com/manuals to read and/or

download the manual.

•

•

•

•

EQUALIZER

During an outside call, intercom call, message
or announcement playback, press to change the
quality of the audio to best suit your hearing.

4

Main menu

>Play messages

Answering sys

Handset
side view

IMPORTANT INFORMATION

Use only the power adapter supplied with this product. To order a replacement

power adapter, visit our website at www.telephones.att.com or call

1 [phone]. In Canada, dial 1 [phone].

The power adapter is intended to be correctly oriented in a vertical or floor
mount position. The prongs are not designed to hold the plug in place if it is
plugged into a ceiling, under-the-table or cabinet outlet.

•

•

Plug the power adapter into an
electrical outlet not controlled by
a wall switch.

5

Charger installation

Install the charger as shown below.

Getting started

6

Battery installation and charging

Install the battery as shown on page 7. Once you have installed

the battery, the screen indicates the battery status (see the table
below). If necessary, place the handset in the telephone base or
charger to charge the battery. For best performance, keep the
handset in the telephone base or charger when not in use. The
battery is fully charged after 10 hours of continuous charging. See

the table on page 29 for battery operating times.
If the screen shows Place in charger and flashes, you need to

charge the handset without interruption for at least 30 minutes to

give the handset enough charge to use the telephone for a short
time. The following table summarizes the battery charge indicators

and actions to take.

Getting started

Battery indicators Battery status Action

The screen is blank, or
shows Place in charger
and (flashing).

Battery has no or
very little charge. The
handset cannot be used.

Charge without interruption
(at least 30 minutes).

The screen shows
Low battery and
(flashing).

Battery has enough
charge to be used for a
short time.

Charge without interruption
(at least 30 minutes).

The screen shows
HANDSET X.

Battery is charged. To keep the battery

charged, place it in the
telephone base or charger
when not in use.

NOTE: If you are on a phone call in low battery mode, you hear four short
beeps every minute.

Battery installation and charging

Getting started

7

Step 1

Plug the battery
connector securely
into the socket inside
the handset battery
compartment. Insert the
supplied battery with
the label THIS SIDE UP
facing up as indicated.

Step 2

Align the cover
flat against
the battery
compartment,
then slide it
upwards until it
clicks into place.

Step 3

Charge the handset by placing it face forward in the
telephone base or charger. The CHARGE light on the
handset is on during charging.

CHARGE light

IMPORTANT INFORMATION

Use only the supplied rechargeable battery or replacement battery
(model BT166342). To order, visit our website at

www.telephones.att.com or call 1 [phone].

In Canada, dial 1 [phone].

If you do not use the handset for a long time, disconnect and remove
the battery to prevent possible leakage.

•

•

Battery Pack

BT183342 2.4V 400mAh Ni-MH

WARNING: DO NOT BURN OR

PUNCTURE BATTERIES

MADE IN CHINA

MANUFACTURED BY BYD BYYYWW