How it Works
AT&T
Loading...
CL80114
User Manual
39 pgs2.86 Mb0

AT&T CL80114 User Manual

User’s manual
CL80114 DECT 6.0 expansion handset for use with AT&T models CL82114/CL82214/CL82314/ CL82364/CL82414/CL82464/ CL82514/CL83114/CL83214/ CL83314/CL83364/CL83414/ CL83464
Congratulations
1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.
This telephone meets the California Energy Commission regulations for energy consumption. Your telephone is set up to comply with the energy-conserving standards right out of the box. No further action is necessary.
Model number: CL80114 Type: DECT 6.0 expansion handset
Serial number:
Purchase date:
Place of purchase:
Both the model and serial numbers of your AT&T product can be found on the bottom of the telephone base.
Save your sales receipt and original packaging in case it is necessary to return your telephone for warranty service.
Telephones identified with this logo have reduced noise and interference when used with most T-coil equipped hearing aids and cochlear implants. The TIA-1083 Compliant Logo is a trademark of the Telecommunications Industry Association. Used under license.
© 2014 Advanced American Telephones. All Rights Reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property licensed to Advanced American Telephones, San Antonio, TX 78219. Printed in China.
The ENERGY STAR® program (www.energystar.gov) recognizes and encourages the use of products that save energy and help protect our environment. We are proud to supply this product with an ENERGY STAR® qualified power adapter meeting the latest energy efficiency guidelines.
T
Compatible with
Hearing Aid T-Coil
TIA-1083
Parts checklist
Your telephone package contains the following items. Save your sales receipt and original packaging in the event warranty service is necessary.
Battery for cordless handset
Cordless handset
Charger for cordless handset with power adapter installed
Battery compartment cover
User’s manual
User’s manual
CL80114 DECT 6.0 expansion handset for use with AT&T models CL82114/CL82214/CL82314/ CL82364/CL82414/CL82464/ CL82514/CL83114/CL83214/ CL83314/CL83364/CL83414/ CL83464
THIS SIDE UP / CE CÔTÉ VERS LE HAUT
Battery Pack / Bloc-piles :
BT183342/BT283342 (2.4V 400mAh Ni-MH)
WARNING / AVERTISSEMENT :
DO NOT BURN OR PUNCTURE BATTERIES.
NE PAS INCINÉRER OU PERCER LES PILES.
Made in China / Fabriqué en chine CR1349
User’s manual
CL80114 DECT 6.0 expansion handset for use with AT&T models CL82114/CL82214/CL82314/CL82364/ CL82414/CL82464/CL82514/CL83114/ CL83214/CL83314/CL83364/CL83414/ CL83464
Table of contents
Getting started
Installation ...................................................................................................................1
Quick reference guide - handset ......................................................................2
Charger installation .................................................................................................5
Battery installation and charging .....................................................................6
Registration and deregistration
Adding and registering handsets .....................................................................8
Register a handset to your telephone base ..........................................8
Deregistering handsets ......................................................................................10
Deregister all handsets from your telephone base .........................10
Appendix
Troubleshooting .....................................................................................................11
Maintenance.............................................................................................................19
Important safety information ..........................................................................20
Safety information.............................................................................................20
Especially about cordless telephones .....................................................21
Precautions for users of implanted cardiac pacemakers ..............22
Pacemaker patients ..........................................................................................22
ECO mode .............................................................................................................22
Especially about telephone answering systems ................................22
For C-UL compliance ...........................................................................................23
Mesures de sécurité importantes ..............................................................23
FCC Part 68 and ACTA........................................................................................26
FCC Part 15 ..............................................................................................................28
California Energy Commission battery charging testing instructions ...29
Limited warranty ....................................................................................................30
Technical specifications .....................................................................................33
DECT 6.0 digital technology .........................................................................33
Telephone operating range ..........................................................................33
Redefining long range coverage and clarity ........................................33
HD audio ................................................................................................................33
Simulated full-duplex handset speakerphone ....................................34
See pages 6-7 for easy instructions.
You must install and charge the battery before using the telephone.
STOP!
Installation
Your product may be shipped with a protective sticker covering the handset display - remove it before use.
For customer service or product information, visit our website at
www.telephones.att.com or call 1 (800) 222-3111.
In Canada, dial 1 (866) 288-4268.
Avoid placing the telephone base too close to:
Communication devices such as television sets, VCRs, or other cordless telephones.
Excessive heat sources. Noise sources such as a window with traffic outside, motors,
microwave ovens, refrigerators, or fluorescent lighting. Excessive dust sources such as a workshop or garage. Excessive moisture. Extremely low temperature. Mechanical vibration or shock such as on top of a washing
machine or workbench.
•
•
•
•
•
•
•
Getting started
1
Quick reference guide - handset
Getting started
2
CHARGE light
On when the handset is charging in the telephone base or charger.
qCID/VOLUME
Press qCID to show caller ID log when the handset is not in use.
Press to scroll down while in menus. While entering names or numbers, press
to move the cursor to the left. Press to decrease the listening volume when
on a call. Press to decrease the message playback
volume (for models with built-in answering system only).
•
•
•
•
•
/SPEA�ERSPEA�ER
Press to make or answer a call using the speakerphone.
TONE /a>A
Press to switch to tone dialing temporarily during a call if you have pulse service.
While entering names, press to change the next letter to upper or lower case.
•
•
1
Press and hold to set or to dial your voicemail number.
PHONE/FLASH
Press to make or answer a call. During a call, press to answer an incoming
call when you receive a call waiting alert.
•
•
REDIAL/PAUSE
Press repeatedly to view the last ten numbers dialed.
While entering numbers, press and hold to insert a dialing pause.
•
•
Quick reference guide - handset
Getting started
3
pDIR/VOLUME
Press pDIR to show directory entries when the handset is not in use.
Press to scroll up while in menus. While entering names or numbers, press
to move the cursor to the right. Press to increase the listening volume
when on a call. Press to increase the message playback
volume (for models with built-in answering system only).
•
•
•
•
•
MENU/SELECT
When the handset is not in use, press to show the menu.
While in the menu, press to select an item or save an entry or setting.
•
•
OFF/CANCEL
During a call, press to hang up. While in a menu, press to cancel an
operation, back up to the previous menu, or exit the menu display; or press and hold this button to exit to idle mode.
Press and hold while the telephone is not in use to erase the missed call indicator.
•
•
•
QUIET# (pound key)
Press and hold to enter the QUIET mode setting screen, or to deactivate QUIET mode.
MUTE/DELETE
During a call, press to mute the microphone.
While reviewing the caller ID log, the directory or the redial memory, press to delete an individual entry.
While predialing, press to delete digits.
•
•
•
EQ
During an outside call, intercom call, message or announcement playback, press to change the audio quality to best suit your hearing.
Quick reference guide - handset
Getting started
4
For complete instructions, refer to the manual provided with your CL82114/CL82214/CL82314/CL82364/CL82414/CL82464/ CL82514/CL83114/CL83214/CL83314/CL83364/CL83414/ CL83464 telephone system. If you are unable to find your manual,
go to www.telephones.att.com/manuals to read and/or download the manual.
Handset side view
Main menu
The > symbol highlights a menu item.
Main menu
Play messages Answering sys
Directory
Caller ID log Call block
Intercom Ringers Set date/time Settings Web address
Using menus:
Press MENU/SELECT to show the menu.
Press qCID or pDIR to scroll through menu items.
Press MENU/SELECT to confirm or save changes to a highlighted menu item.
Press OFF/CANCEL to cancel an operation, back up to the previous menu, or exit the menu display.
•
•
•
•
>Play messages
Answering sys
Only on CL82114/ CL82214/CL82314/ CL82364/CL82414/ CL82464/CL82514 telephone system
PUSH TO TAL�
Press to initiate a one-to-one or one-to-group broadcast. Press and hold to broadcast to a group of system devices.
•
•
IMPORTANT INFORMATION
1. Use only the power adapter supplied with this product. To order a replacement
power adapter, visit our website at www.telephones.att.com or call
1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.
2. The power adapter is intended to be correctly oriented in a vertical or floor
mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet.
Plug the power adapter into an electrical outlet not controlled by a wall switch.
5
Charger installation
Install the charger, as shown below.
Getting started
6
Battery installation and charging
Install the battery as shown on page 7. Once you have installed
the battery, the screen indicates the battery status (see the following table). If necessary, place the handset in the telephone base or charger to charge the battery. For best performance, keep the handset in the telephone base or charger when not in use. The battery is fully charged after ten hours of continuous charging. See
the table on page 33 for battery operating times. If the screen shows Place in charger and flashes, you need to
charge the handset without interruption for at least 30 minutes to
give the handset enough charge to use the telephone for a short time. The following table summarizes the battery charge indicators
and actions to take.
Getting started
Battery indicators Battery status Action
The screen is blank, or shows Place in charger and (flashing).
Battery has no or very little charge. The handset cannot be used.
Charge without interruption (at least 30 minutes).
The screen shows Low battery and (flashing).
Battery has enough charge to be used for a short time.
Charge without interruption (at least 30 minutes).
The screen shows HANDSET X.
Battery is charged. To keep the battery
charged, place it in the telephone base or charger when not in use.
NOTE: If you are on a phone call in low battery mode, you hear four short beeps every minute.
Battery installation and charging
Getting started
7
Step 1
Plug the battery connector securely into the socket inside the handset battery compartment. Insert the supplied battery with the label THIS SIDE UP facing up, as indicated.
Step 2
Align the cover flat against the battery compartment, then slide it upwards until it clicks into place.
Step 3
Charge the handset by placing it face forward in the telephone base or charger. The CHARGE light on the handset is on during charging.
CHARGE light
IMPORTANT INFORMATION
1. Use only the supplied rechargeable battery or replacement battery
(model BT183342/BT283342). To order, visit our website at
www.telephones.att.com or call 1 (800) 222-3111.
In Canada, dial 1 (866) 288-4268.
2. If you do not use the handset for a long time, disconnect and remove
the battery to prevent possible leakage.
After you install your telephone or power returns following a power outage, the handset will prompt you to set the date and time. After that, it will prompt if you want to set up the answering system via voice guide (only for CL82114/CL82214/CL82314/CL82364/ CL82414/CL82464/CL82514 telephone system). Press MENU/SELECT to start. For details, see the corresponding sections in the telephone system’s user’s manual. To skip these settings, press
OFF/CANCEL
.
THIS SIDE UP / CE CÔTÉ VERS LE HAUT
Battery Pack / Bloc-piles :
BT183342/BT283342 (2.4V 400mAh Ni-MH)
WARNING / AVERTISSEMENT :
DO NOT BURN OR PUNCTURE BATTERIES.
NE PAS INCINÉRER OU PERCER LES PILES.
Made in China / Fabriqué en chine
THIS SIDE UP / CE CÔTÉ VERS LE HAUT
Battery Pack / Bloc-piles :
BT183342/BT283342 (2.4V 400mAh Ni-MH)
WARNING / AVERTISSEMENT :
DO NOT BURN OR PUNCTURE BATTERIES.
NE PAS INCINÉRER OU PERCER LES PILES.
Made in China / Fabriqué en chine
Adding and registering handsets
Before using a new CL80114 handset, you must register it with the AT&T CL82114/CL82214/CL82314/CL82364/CL82414/CL82464/ CL82514/CL83114/CL83214/CL83314/CL83364/CL83414/ CL83464 telephone system (purchased separately). The telephone system can support up to 12 handsets.
The handsets provided with your telephone system are already registered as HANDSET 1, and so forth. Additional handsets registered to the telephone system are assigned in sequential order they are registered (up to HANDSET 12).
You must register each handset separately. When first purchased, all expansion handsets show To register HS, see manual.
Register a handset to your telephone base
1. Before you begin registration, make sure the handset is out of the telephone base or charger and shows To register HS, see manual.
2. Put the handset you wish to register on the telephone base cradle.
3. The screen shows Registering... Please wait and the IN USE light on the telephone base turns on. If the registration is successful, HANDSET X Registered appears on the screen (HANDSET represents the handset name, X represents the handset number). The handset beeps and the IN USE light turns off. The handset is now registered with the telephone base.
Registration and deregistration
8
To register HS,
see manual.
For registration, put the handset on the telephone base, not the handset charger.
Registering...
Please wait
HANDSET X Registered
Loading...
+ 27 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use