AT&T BWX560 User Manual

BWX560 Users Manual and Installation Instructions

BWX560 Camera Users Manual and

Installation Instructions

Safety Warning

1. Handle the camera with care.

Be careful when handling the camera, do not drop it or subject
it to strong shock or vibration to prevent any damages to it. Do
not disassemble it or place it on an unstable base.

2. Do not install the camera near electric or magnetic fields.

Install the camera away from TV, radio transmitter, magnet, electric motor, transformer,
audio speakers because the magnetic fields generated from above devices will distort
the video image.

3. Do not install the camera in the high temperature environment.

Install the camera away from stoves, or other heat generating devices as the high
temperature could cause deformation, discoloration or other damage to the camera.
Install the camera where the temperature range will stay between 0 to 50 (32 to 122).

4. Never face the camera toward the sun.

Never aim the camera at the sun or other extremely bright objects whether it is in use or
not.

5. Cleaning

Do not touch the surface of CCD sensor by hand directly.
Use a soft cloth to remove the dirt from the camera body. Use lens
tissue or a cotton tipped applicator and ethanol to clean the CCD
sensor and the camera lens. When the camera is not in use, put the cover cap on the
lens mount.

Introduction

The new BWX560 series is a solid-state B/W video camera specially designed for high
quality surveillance applications. It incorporates break-through DSP technology that
provides the most reliable and accurate B/W picture in security industry. The camera is
convenient to use with C-mount or CS-mount lenses and has an easy back-focus
adjustment help to achieve installation efficiency.

Main Features :

• 1/3” B/W CCD pick-up device for more than 560 TV lines of horizontal resolution

• Sophisticated DSP (Digital Signal Processing) circuitry design that delivers

excellent picture quality and performance.

• Wide range automatic electronic shutter: 1/60(1/50)~1/100,000 sec

• Auto line lock with external phase adjustment

• Used with either C-mount or CS-mount lenses and easy back-focus adjustment.

• System available in EIA or CCIR.

1

BWX560 Users Manual and Installation Instructions

Specification

Pickup Device: 1/3 inch interline transfer B/W CCD
Picture Element: 768x494 (EIA)752x582 (CCIR)
Horizontal resolution: 560 TV lines
Sensitivity: 0.01 lux/F=1.2
S/N ratio: Over 48 dB
Electronic shutter: 1/60(1/50)~1/100,000 sec
Auto. Iris: Video / Direct Drive switch
Flickerless: On/Off
Back Light Comp: On/Off
Electronic Shutter: On/Off
Auto Gain Control: On/Off
Line Lock: On/Off
Audio: Yes
Gamma Correction: > 0.45
Video output: 1.0Vp-p,75 ohm(BNC)
Sync. Mode: 1. Line-Locked with LL on

Lens Mount: C/CS mount back focus adjustment
Power source: 90-260VAC (EQ150)

Dimension: 51x57x140.2mm
Operating Temperature: 0_ to +50_
Power Consumption: 5W max

2. Internal Sync. With LL off

12VDC/24VAC (EQ150A)

2