AT&T BTS01 User Manual

Portable Bluetooth® Speaker

LoudSpeak’r

user’s
manual

model #: BTS01

Page 2

hello.

What’s Included

Page 3

Unpack LoudSpeak’r and make sure all accessories are put aside so they will
not be lost.

Thank you for purchasing
LoudSpeak’r [ BTS01].

Portable Bluetooth® Speaker

The Bluetooth® word mark and logos are registered trademarks
owned by Bluetooth SIG, Inc.

Mini USB Cable

Portable Speaker

Features

· Bluetooth 2.1 + EDR

· Hands free speakerphone

· Wireless range of approximately
30 feet

· ProTune Speaker System with
RealBass Technology

· Answer calls & control your music
from the speaker

· Easy USB charging

· Noise cancelling microphone

· Rechargeable Li-ion battery with
over 5 hours of calls/playback

· Auxiliary input to play music from
any device with a headphone jack

· Voice notifications

· Battery indicator on smart phones

Page 5

Contents

Page 4

Introduction

What’s Included

Safety Information

Getting Started
Controls

Operational Instructions

Charging
Power Up
Using the Audio Line in Connection
Pairing Your Bluetooth Device
Connecting to a Paired Bluetooth
Music Playback Functions
Hands Free Speakerphone
LED Light Indicator

Troubleshooting

Compliance with FCC Regulations

Warranty Information

Specifications

2

3

5

6

7
7
7
8
9

9
10
10

11

12

13

15

Safety Information

Important Safety Instructions

1. WATER AND MOISTURE - LoudSpeak’r should not be used near water.

For example: near a bathtub, washbowl, kitchen sink, laundry tub,
swimming pool or in a wet basement.

2. OBJECTS AND LIQUID ENTRY - Care should be taken so that external

objects do not fall into and liquids are not spilled onto any openings or
vents located on the product.

3. HEAT - LoudSpeak’r should be situated away from heat sources such

as radiators, heat registers, stoves or other appliances (including
amplifiers) that produce heat.

4. DAMAGE REQUIRING SERVICE - LoudSpeak’r should be serviced by

qualified service personnel when:
A. objects have fallen into or liquid has been spilled onto the enclosure.
B. LoudSpeak’r has been exposed to rain.
C. LoudSpeak’r has been dropped or the enclosure damaged.
D. LoudSpeak’r exhibits a marked change in performance or does not
operate normally.

5. SERVICING - The user should not attempt to service LoudSpeak’r

beyond those methods described in the user’s manual. Opening or
removing covers will expose you to dangerous voltage and other
hazards. Service methods not covered in the user’s manual should be
referred to qualified service personnel.

6. SAFETY CHECK - Upon completion of any service or repair to

LoudSpeak’r, ask the service technician to perform safety checks to
determine that the product is in proper working condition.

7. BATTERY - This device contains a rechargeable Lithium-ion battery.

Please do not attempt to replace the battery yourself. The battery may
only be replaced by our authorized service centers.

Please read all safety and operating instructions carefully before installation
and use. Keep these instructions handy for future reference. Take special
note of all warnings listed in this user’s manual and on LoudSpeak’r.

Getting Started

Page 6

Controls

Getting Started

Page 7

Charging

Power Up

- Slide the switch on the back of the speaker to the ON position.

- Press and hold the

until the front LED indicator turns on blue.

- To power down your speaker, hold down the

button until the speaker

says “Goodbye”

- On the back of the speaker, slide the main power switch to the OFF
position to prevent accidental button presses.

Using the Audio Line in Connection (AUX-INPUT

)

- To playback your music via the AUX-IN port, plug a standard stereo
headphone cable (3.5 mm) from your audio device to LoudSpeak’r and
begin playback on your audio device.

- Charge your LoudSpeak’r through any USB jack or wall charger.

- The LED indicator will begin to blink blue.

- Full charge time is two hours and the LED indicator will stop blinking.

1 2 3

5

94 10 111213

876

General

4. Microphone

5. Volume down

6. LED indicator

7. Power ON/OFF; Enter Bluetooth paring mode
(Long hold while device is off)

8. Volume up

9. Stereo speaker

10. Passive radiator subwoofer

11. OFF /ON switch

12. USB charging jack

13. Aux-in jack

During Bluetooth Music Playback

1. Previous track

2. Play/Pause

3. Next track

During Phone Calls

1. and 3. Mute/Unmute the microphone

2. During ringing: Answer incoming call/Reject incoming

call (long press)During the call: End current call/Toggle
audio between the phone and speaker (long press)

Operational Instructions

Page 8

Pairing Your Bluetooth Device

Note: Please see page 13 of this manual for Bluetooth compatibility

information.

Step 1: On your Loudspeak’r:

- Make sure the speaker is powered off, and the master switch on
the rear is in the ON position.

- Press and hold the

button until the front LED indicator flashes

RED/BLUE.

- The speaker will say “Discovering”.

- Your speaker is now in pairing mode and is ready to connect to
your Bluetooth device.

Note: The speaker will stay in pairing mode for up to 3 minutes.

Step 2: On your compatible Bluetooth device:

- Navigate to the Bluetooth menu on your device.

- Turn on Bluetooth and begin searching for available devices to
pair.

- Select “LoudSpeak’r” from the list of results, and your device will
begin to pair.

- If your device asks for a pairing pass code, enter “0000”.

- Once paired, you will hear a voice prompt and the LED indicator on
the speaker will only flash blue.

- The LoudSpeak’r has a wireless range of approximately 30 feet,
and your media device will stay connected to the speaker within
that range.

Note: Many Bluetooth devices, including iPhone & iPad, will not

require you to enter a pairing pass code.

Operational Instructions

Page 9

Connecting to a Paired Bluetooth Device

- You will only need to pair your Bluetooth device with the speaker one
time.

- The next time your Bluetooth device and the speaker are in range
of each other, and the Bluetooth feature is turned on, they will
automatically connect.

- The speaker will only automatically connect to the last Bluetooth device
it was connected to.

- If your paired device does not automatically connect, navigate to the
Bluetooth menu on your device and select LoudSpeak’r from the list.

Note: Your LoudSpeak’r can pair with and remember multiple devices,

however it can only connect with one device at a time.

Music Playback Functions

- Once your media device is connected to the speaker, simply start
playing your music, movie or game. All the audio will automatically be
played through LoudSpeak’r.

- Press to Play/Pause the audio.

- Press

to skip to the next track.

- Press to skip to the previous track.

- Press + or - to adjust the volume level of the speaker.

- When maximum or minimum volume level is reached, you will hear an
alert tone.

- During an incoming call, the music will automatically pause playback and
you can answer/reject the call using the button controls.

Note: The volume controls on your media device work separately from

the volume controls on the LoudSpeak’r.

Operational Instructions

Page 10

- Outgoing calls

To place a call, simply initiate the call from your compatible Bluetooth
phone and the call will automatically be routed through your paired
LoudSpeak’r.

- Incoming calls

• Press

to answer the call on your speaker.

• Press and hold

to reject the call.

- During a call

• Press

to hang up.

• Press and hold

to route the call back and forth between your phone

and the speaker.

• Double press

to answer call waiting.

• Double press

to toggle between the original call and the new call.

• Press

or at anytime during the call to mute your microphone. The

light indicator will blink blue.

- No light: Power OFF

- Flashing blue & red: Paring Mode

- Solid blue: Power ON (Battery level>30%)

- Solid red: Power ON (Battery level<30%)

- Blinking red/Auto power OFF in 5 mins: Power ON (Battery level<10%)

- Flashing blue: Charging

- No light: Power OFF + fully charged

Hands Free Speakerphone

LED Light Indicator (on front of speaker)

Troubleshooting

Page 11

Symptom

Music is not
streaming over
Bluetooth

LoudSpeak’r
doesn’t answer
phone calls

Music doesn’t
resume after
hanging up a call

No music control by
LoudSpeak’r

No power

Solution

Make sure LoudSpeak’r is fully charged.

Make sure your Bluetooth device has A2DP
profile.
Check if both devices are paired and connected
over Bluetooth.
Restart the LoudSpeak’r to auto-connect with
your Bluetooth device.

Make sure your mobile device has HSP/HFP
profile.
Check if both devices are paired and connected
over Bluetooth.
Restart the LoudSpeak’r to auto-connect with
your Bluetooth device.

Press play to resume music.

Make sure your Bluetooth device has AVRCP
profile.

Remarks:

If troubleshooting does not eliminate the problem, shut down the speaker by
sliding the switch on the back to OFF

. In case the problem still exists, see

warranty information on page 13 and page 14 to obtain service.

Compliance with FCC Regulations

Page 12

The equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate Radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to Radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to Radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.

- Consult the dealer or an experienced Radio/television technician for
assistance.

THE SPECIFICATION AND EXTERNAL APPEARANCE OF THE SPEAKER ARE
SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.

If at any time in the future you should need to dispose
of this product, please note that waste electrical
products should not be disposed of with household
waste. Please recycle where facilities exist. Check with
your local authority or retailer for recycling advice.

Warranty Information

Page 13

Limited Warranty

The AT&T brands are used under license. Any repair, replacement, or
warranty service, and all questions about this product should be directed to
Concept 101 LLC at www.att.com/electronics or call 1 [phone] from
the USA or Canada.

Concept 101 LLC warrants to the original purchaser that the product will
be free from defects in material, parts and workmanship for the period
designated for this product. The warranty commences the day the product
is purchased and covers up to a period of one (1) year (90 day Labor and
1 year Parts). Concept 101 LLC agrees that it will, at its option, replace
the defective product with either a new or remanufactured music dock
equivalent to your original purchase during the warranty period. Should the
Parts warranty period exceed the Labor warranty period, Concept 101 LLC
will supply at no charge for the remainder of the Parts warranty, any new or
remanufactured replacement parts as required by the product. During this
period all labor and service charges will become the responsibility of the
customer.

Exclusions: This warranty does not apply to the appearance or exterior

of the product which may have been damaged or defaced,
altered or modified in design or construction. This warranty
does not apply if the serial number is altered or removed, or
if there is any damage due to power line surge, user damage
to the AC power cord, connection to improper voltage
source, general misuse, accidents, or repair attempts by
unauthorized service agents. Other exclusions include ear
pads, rechargeable and non-rechargeable batteries.

Warranty Information

Page 14

REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE
EXCLUSIVE REMEDY OF THE CUSTOMER; Concept 101 LLC SHALL NOT
BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT,
EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW. ANY IMPLIED
WARRANTY OF MERCHANTABILITY OF FITNESS FOR A PARTICULAR
PURPOSE ON THIS PRODUCT IS LIMITED TO THE DURATION OF THE
WARRANTY.

Some states do not allow the exclusion or limitations of incidental or
consequential damages, or limitations on how long the warranty lasts. In
these cases the above exclusions or limitations may not apply to you. This
warranty gives you specific legal rights and you may also have other rights
which vary from state to state.

Obtaining Service: To obtain service, product literature, supplies or

accessories please call 1 888-920-8680, or visit our
website, www.att.com/electronics, to create a ticket
for exchange/repair. Please make sure to provide
the date of purchase, model number and a brief
description of the problem. Our customer service
representative will contact you or send detailed return
instructions.

Concept 101 LLC does not warrant that the headset will work properly in
all environmental conditions, and makes no warranty and representation,
either implied or expressed, with respect to the quality, performance,
merchantability, or fitness for a particular purpose other than the purpose
identified within this user’s manual. Concept 101 LLC has made every
effort to ensure that this user’s manual is accurate and disclaims liability
for any inaccuracies or omissions that may have occurred. Information
in this user’s manual is subject to change without notice and does not
represent a commitment on the part of Concept 101 LLC. Concept 101 LLC
reserves the right to make improvements to this user’s manual and/or to the
products described in this user’s manual at any time without notice. If you
find information in this manual that is incorrect, misleading, or incomplete,
please contact us through our website.

Specifications

Page 15

- Full-range dual 35mm driver + passive radiator

- Distortion <= 10%

- Frequency response: 200 Hz - 15k Hz

- Li-ion battery: 700mAh

- Playtime: up to 5 hours

- Charging time: 2 hours

- Bluetooth 2.1 + EDR

- Bluetooth compatibility: Bluetooth 2.0 or above device
with A2DP/AVRCP/HFP/HSP

purchase date:

place of purchase:

©2014 Concept 101 LLC. All Rights Reserved. AT&T and the AT&T logo are
trademarks of AT&T Intellectual Property licensed to Concept 101 LLC, New
York, New York 10018. Issue 9.0 AT&T 10/2014.

www.att.com/electronics