ATON DLA2RF User Manual

Page 1
2
ROOM
SPEAKER SELECTOR WITH RF REMOTE
M o d el DL
A2RF
INNOvATIve SPeAkeR SeLeCTION
AbOuT DLA TeChNOLOgy*
(DyNAmIC LeveL ADjuSTmeNT)
Unlike typical speaker selectors that use basic impedance correction, the ATON DLA utilizes a logic circuit that actively monitors how many rooms are on, along with their respective volume levels, and delivers maximum available power to each room - simultaneously protecting the DLA and the amplifier from damage. Each DLA room output features an electronically controlled potentiometer, built with the highest-grade materials available to ensure super-flat frequency response and high power handling (125 W).
*Patent Pending
RF RemOTe CONTROL
Electronic controls on the front of the DLA2RF provide true ease of use of all system functions. But what puts the DLA2RF in a class of its own is RF remote control. Using the industry's first RF remote for a speaker selector, you can adjust audio in each room with volume, mute, all on/off and unique "sound scene"† commands from anywhere inside or outside the home (up to 200 feet away).
PLug AND PLAy
The DLA2RF easily connects to your home theater/stereo receiver and up to two pairs of wired speakers routed throughout the home. If you already have a basic speaker selector, the DLA quickly replaces your existing selector and allows you to play and control your favorite music like never before.
The eND ReSuLT
The ATON DLA2RF allows you to enhance your environment with rich audio in multiple locations. You can enjoy the freedom of letting the party be vibrant while keeping the kitchen conversational. And with convenient RF control, ATON lets you relax so that you can finally sit back...and listen.
A "sound scene" is a programmable preset that allows you to create and recall your favorite volume
settings for each room with the press of a button.
DLA2RF APPLICATION
DLA2RF
Receiver
Technology in reach.
Receiver audio can be routed to two additional areas and adjusted using the RF remote.
RF Receiver
RF Remote
Kitchen Pool
Page 2
DLA2RF FeATuReS
DLA (Dynamic Level Adjustment) Technology delivers maximum available volume levels to each room while protecting your amplifier from damage (patent pending)
ATON RF Remote (included) controls volume levels independently for each room from inside or outside your home (up to 200 feet away)
Adds up to 2 pairs of speakers to your home theater/stereo receiver or amplifier
Programmable "Scene" command for one-touch recall of your favorite system settings
DLA2RF RF RemOTe FeATuReS
"All On" button turns audio on in all rooms
"All Off" button turns audio off in all rooms
"Scene" button allows for one-touch recall of your favorite system settings
"Vol +", "Vol -" and "Mute" buttons allow for volume and mute control in selected rooms
Up to 200 ft. range (through walls, ceilings and floors)
One-touch "All On" command turns audio on in all rooms
One-touch "All Off" command turns audio off in all rooms
Room labels with adhesive backing included for easy front panel room identification
Easy install guide included for quick setup
1 Year Limited Warranty
Up to seven ATON RF Remotes can be programmed to a single RF Receiver
RF Remotes will only control the RF Receiver they are programmed to
RF Receiver easily connects to DLA Selectors using a simple RJ-11 plug
DLA2RF SPeCIFICATIONS
Category
Frequency Response 20 Hz to 20 kHz
Power Handling (RMS) per channel 125 W
Max Attenuation -56 dB at last step
Dynamic Range 43 dB over 12 steps
THD (Total Harmonic Distortion) <1%
Amplifier Impedance 8 Ohms
Speaker Impedance 8 Ohms
Dimensions 2-3/16" H x 8-1/2" W x 7-5/8" D
Weight 6.1 lbs.
DLA2RF
Technology in reach.
©2007 ATON. All rights reserved. • 1300 New Circle Road, Suite 150 • Lexington, KY 40505 • www.atonhome.com
Loading...