Page 1
AWR2W, AWR3W
AWR Series — Tilt-Out Wall Cabinets
Features
• The AWR series provides safety, security, and protection for rack
mount gear in commercial applications.
• The AWR series includes a highly adaptable 3RU front access panel
which is great for “user accessible" electronics.
• Adapt the AWR series to most any wall surface with the attractive
flush mount trim ring (included).
Applications
Convenient access and lock-in security highlights Atlas-Sound’s
re-designed AWR2W – 2RU and AWR3W – 3RU tilt-out wall cabinets
for 19" equipment. These re-designed welded models can be surface
or recessed mounted (trim ring included) and include a 3RU panel
opening above the main bay for connector panels or power distribution
with a usable depth of 4" for the AWR2W and 5.75" for the AWR3W.
These cabinets are perfect for mounting remote amplifiers and control
equipment.
The series features a 16-ga. CRS formed door frame with a 16-ga. CRS
locking tilt-out door which closes against rack face plate. The surface
mounting door is attached to the frame internally with 2 pin style hinges
to prevent tampering.
Technical Specifications
AWR2W:
Rack Space: 2
Usable Depth: 20" (50.8cm) Top RU
17.25" (43.81cm) Bottom RU
Mounting Depth: 4" (10.16cm)
Height: 34" (86.36cm)
Width: 27" (68.58cm)
Depth: 4.8" (12.12cm)
Weight: 54 lbs (24.49kg)
AWR3W:
Rack Space: 3
Usable Depth: 20" (50.8cm) Top RU
17.25" (43.81cm) Bottom RU
Mounting Depth: 5.75" (14.6cm)
Height: 34’ (86.36cm)
Width: 27" (68.58cm)
Depth: 6.55" (16.69cm)
Weight: 57 lbs (25.85kg)
AWR2W
Doors can be opened to two positions—tilt-out for operation and by
releasing side catches, the door will open to approximately 90° for
equipment installation and maintenance. Units are furnished with two
steel safety catch cables which suspend and hold doors at 90°.
Front panels have 45-degree mitered edges to present a clean flush
appearance. Back box is 16-ga. CRS equipped with six concentric
knockouts of 1/2" and 3/4". AWR Series is shipped complete and ready
for installation. Panel mounting holes accept 10-32 hardware.
©2007 Atlas Sound L.P. All rights reserved. Atlas Sound and Strategy Series are trademarks of Atlas Sound L.P. All other trademarks are the property of their respective owners. ATS002700 RevA 8/07
1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
AWR3W
(Fully Extended)
AtlasSound.com
1/2
Page 2
ARCHITECT & ENGINEER SPECIFICATIONS
The tilt-out wall cabinet shall be Atlas Sound Model _______ (AWR2W
or AWR3W) or approved equal. The door and door frame shall be
constructed of 16-ga. CRS. Unit shall be vandal-resistant via internal
mounting of door frame and shall be equipped with a key-lock assembly.
Door/chassis assembly shall be securely fastened to door frame via a
double hinge and shall have door stops to ensure proper closing. Cabinet
door shall be equipped with two steel safety-catch cables to prevent
door from opening beyond 90˚. Unit shall include a flush plaster ring for
recessed mounting. The backbox shall be included and shall be equipped
with concentric knockouts for wire entry. Backbox shall be constructed
of 16-ga. CRS.
AWR2W
(Tilt-Out)
AWR3W
(Side View)
©2007 Atlas Sound L.P. All rights reserved. Atlas Sound and Strategy Series are trademarks of Atlas Sound L.P. All other trademarks are the property of their respective owners. ATS002700 RevA 8/07
1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
(Fully Extended)
AWR2W
AWR3W
AtlasSound.com
2/2
Loading...