Atlantic Technology IWTS-30 LCR User Manual

IWTS-30 LCR In-Wall HT System
The State of Our Art
The IWTS-30 LCR is our top-of-the-line in-wall theater speaker system, the best we’ve ever made. Considering that Atlantic has been in the home theater speaker business since 1989, that’s really saying something.
This system represents a combination of superlative audio performance, simple installation, and innovative features that are unmatched by virtually any other custom-installed system.
IWTS-30 LCR
The midranges and tweeter are arrayed in a vertical M-T-M configuration, in a separate sealed enclosure, isolated from the woofer. The entire M-T-M assembly rotates 90º, so that the tweeter-midrange array can be kept in the preferred vertical orientation for optimum dispersion, even if you choose to mount the 30 LCR horizontally.
The M-T-M assembly can also be tilted up to 8º towards the listening area, so no matter where the 30 LCR is mounted—above, below, or far to the sides of the screen—its sound can always be directed precisely at the listeners for pinpoint sonic imaging and localization.
The 3½” midrange driver is a proprietary Atlantic design that uses an over-sized 1” voice coil for outstanding power handling with virtually perfect driver control for ultra-low distortion. Our 1” LRT tweeter has a damped rear chamber/heatsink that allows the tweeter to cross over a full octave lower than an ordinary tweeter, thus delivering much wider dispersion and more even sound coverage.
These advanced mid- and high-frequency drivers, combined with the rotatable­tiltable M-T-M assembly, allow the IWTS-30 LCR to deliver an unprecedented level of effortless, accurate sound, almost independent of where the speaker is mounted.
Product Information Sheet
Rotatable/Tiltable MTM section
IWTS-30 LCR In-Wall HT System
Features
Optional back box — Provides proper enclosure volume for optimum woofer response; minimizes acoustic bleed-through from one room to another.
Rotatable/tiltable M-T-M assembly Retains optimum vertical alignment of M-T-M, even if speaker is installed horizontally; allows mid/high-frequency sound to be directed precisely at listening position
Separate grille/frame — Grille/frame assembly is sold separately from speaker portion, to maximize installation scheduling convenience.
High Frequency Energy, Location and
Boundary Compensation switches
Sophisticated 3-way crossover
AT’s renowned 1” LRT™ soft dome tweeter
Front Panel Controls
HF level — Adjusts tweeter’s output for varying room acoustics
Location — Raises or lowers entire mid-treble band depending
on whether or not speaker is behind perforated video screen
Boundary — Adjusts upper-bass/lower-mid response to correct for “boundary gain” when speaker is too close to corner
Specs
IWTS-30 LCR Type 3-way Drivers Woofer 8” (203mm) GLH*
Midrange (2) 3½” (89mm) GLH* Tweeter 1” (25mm) soft dome LRT™
Frequency Response 55Hz – 20kHz ±3dB Nominal Impedance 6Ω Crossover Frequency 500Hz, 2200Hz 3rd order Sensitivity 89dB Recommended Power 25 – 200 Watts RMS Overall Dimensions 125⁄16 x 215⁄8 x 37⁄8”
(W x H x D) 312 x 547 x 100mm
Cutout Dimensions 111⁄8 x 203⁄8”
(W x H) 283 x 518mm
Optimum Sealed Enclosure Volume 1.0 cu. ft. Net Weight (ea) 15lbs; 6.9kg each
§
Graphite Loaded Homopolymer
*IR Receiver not included
For ease of installation and total flexibility/convenience, the IWTS-30 uses the same grill/frame assembly and New Construction Bracket as the IWCB-626 and IWCB-727 (the GFR-626 and IN-NC-626)
This speaker’s THX certification is your assurance that the IWTS-30 LCR belongs in the very highest category of precision, high­performance audio devices.
IR punchout*
Atlantic Technology is a registered trademark of Atlantic Technology
International. Specifications subject to change without notice.
©2008 Atlantic Technology • 343 Vanderbilt Ave. Norwood, MA 02062
781.762.6300
www.atlantictechnology.com 2.08
Loading...