Page 1
ICTS-6.2 & 8.2 In-Ceiling Theater Systems
ICTS-6.2
ICTS-8.2
An attractive 2-way
ceiling speaker for a
myriad of applications
The ICTS-8.2 and 6.2 2-way ceiling mount speakers are the perfect high quality,
multi-purpose solutions for any surround-sound or whole-house music installations
where stealth is a key requirement. Their long-throw woofers with massive magnet
assemblies and 1” soft-dome tweeters provide outstanding sound coverage for
every application. With a discrete pro le combined with terri c sound, there are no
excuses for not having great music and special effects wherever you want them.
The ICTS-8.2 and 6.2 woofers feature carbon loaded mica/poly cones, rubber
surrounds, and high-temperature voice coils. The 1” soft dome tweeter is mounted
in a clever pivoting housing that lets you direct the high frequencies in any direction
for the best sonic effect. A front mounted high-frequency level control rounds out the
feature set of these high-performance speakers.
In addition, both models utilize advanced computer-optimized crossovers, gold-
Product Information Sheet
Page 2
the front-channel speakers in a high-performance home theater system,
ICTS-6.2 & 8.2 In-Ceiling Theater Systems
Pivoting tweeter section
even when near total invisibility is a primary requirement. Their pivoting
tweeters mean you can “aim” the high frequencies toward the listening
area, for superb sound without any visual compromise.
Home Theater Surround - When used as surround speakers, the
tweeter would be pivoted away from the listening area, towards the
rear or side walls. When installed in this manner, the speakers deliver a
diffuse upper midrange and high frequency sound that helps to create
a convincing, three-dimensional surround sound that draws you into the
action.
Gold-plated connectors
High-frequency level control
Stereo - The speakers are perfect for delivering full 2-channel stereo
sound in any room, giving you great sound quality without any visible
speakers. This is ideal for small spaces like a small den or guest room
where installing two separate boxed speakers is impractical.
High Frequency Level Control - This 3-position switch (– 0 +) allows
the speakers’ high-frequency balance to be tailored for re ective,
normal, and absorptive acoustic environments. This means the speakers
will always sound “right,” whether the room has hardwood oors and
glass sliding doors, or thick cut-pile carpeting and overstuffed furniture.
Speci cations
ICTS-6.2 ICTS-8.2
Dimensions Diameter 9-1/4” (235mm) Diameter 10-7/8” (276mm)
Cut-out Dimensions Diameter 7-7/8” (200mm) Diameter 9-5/8” (245mm)
Depth 4-3/8” (112mm) Depth 4-7/8” (124mm)
New Construction Kit IC-NC-6 IC-NC-8
In-Ceiling Back Box IC-BOX-6/8 (requires IC-NC-6 kit) IC-BOX-6/8 (requires IC-NC-8 kit)
Frequency Response 55 – 20kHz ±3dB 45 – 20kHz ±3dB
Sensitivity 89dB, 1 Watt/1 meter 89dB, 1 Watt/1 meter
Impedance 8 ohms 8 ohms
Woofer 6 -inch (165mm) 8-inch (203mm)
Mica/Graphite loaded Polymer cone Mica/Graphite loaded Polymer cone
Tweeter 1-inch (25mm) silk dome 1-inch (25mm) silk dome
Net Weight 4.8 lbs. 5.25 lbs.
Paintable grille and frame
Atlantic Technology is a registered trademark of Atlantic Technology
International. Speci cations subject to change without notice.
©2004 Atlantic Technology • 343 Vanderbilt Ave.
Norwood, MA 02062 • 781.762.6300
www.atlantictechnology.com 6.04
Loading...