FOUNDATION SUPPORT BOARDS
ASSEMBLY INSTRUCTIONS
( TWIN E-64200 )
Before assembling your Support boards, please read through these instructions carefully and familiarize yourself with the different parts.
Please note that you will require a Phillips screwdriver. ATTENTION! If you receive a damaged or defective item,
please contact Atlantic Furniture at service@atlanticfurniture.com or 1-800-955-3726
READY
TO
ASSEMBLE
PARTS LIST
01
01 SUPPORT BOARDS 3 PCS
PO :
NOTE: WE INCLUDE SPARE HARDWARE IN CASE THE WOOD SCREW ARE DAMAGED DURING ASSEMBLY.
A
Step 1
Step 2
Adult assembly
A
Wood screw
1 1/4” Wood screw - 6 pcs |
HARDWARE |
|
Spare - 1 pc |
||
|
Assemble bed frame according to assembly instructions.
Lay the support boards onto the bed.
A
A A
|
01 |
A |
A |
|
A
Step 3 |
A |
Be sure to align support boards evenly with both |
01 |
ends of side rails. |
|
Screw support boards (01) to side rails, using wood screw (A).
Tighten with Phillips screw driver. (Customer supplied)
Be sure the space between support boards is even.
Page 1 of 1