SLAT KIT TWIN
ASSEMBLY INSTRUCTION
( TWIN E-65000 )
Before assembling your bed slat kit, please read through these instructions carefully and familiarize yourself with the different parts. Please note that you will require a Phillips screwdriver. ATTENTION! If you receive a damaged or defective item,
please contact Atlantic Furniture at service@atlanticfurniture.com or 1-800-955-3726
PARTS LIST
01
01 SLAT KIT 1 SET
READY
TO
ASSEMBLE
NOTE: WE INCLUDE SPARE HARDWARE IN CASE THE WOOD SCREWS ARE DAMAGED DURING ASSEMBLY.
A |
1 1/4” Wood screw - 28 pcs Spare - 2 pcs |
HARDWARE
Step 1 |
Assemble bed frame or bunk bed according to assembly instructions. |
Step 2 Lay the slat kit onto the bed. A
PLATFORM BED
01
WEBBING MUST FACE UP
A
Be sure to align slat kit evenly with both ends of side rail.
Screw slat kit (01) to side rail, using wood screw (A). Tighten with Phillips screwdriver. (Customer supplied) Be sure the space between slats is even.
NOTE: WEBBING MUST FACE UP
A
Wood screw
Adult assembly
A
01
BUNK BED
WEBBING MUST FACE UP
PO :
Page 1 of 1