Atlantic WA-60 Instruction Manual
343 Vanderbilt Avenue Norwood, MA 02062
(781) 762-6300 www.atlantictechnology.com
Limited Warranty
is warranty protects the owner of the Atlantic Technology
Wireless WA-60-t and WA-60-r (the PRODUCT) for one
(1) year from the date of purchase.
is warranty covers all defects in material and workmanship
with the following specic exceptions. ese are:
• Damage caused by improper installation or adjustment
• Damage caused by accident, unreasonable use or neglect
•
Damage from failure to follow instructions contained in
this Instruction Manual
• Damage occurring during shipment
• Damage from the performance of repairs by someone not
authorized by Atlantic Technology
• Any unit on which the serial number has been effaced,
modied, or removed
• Units which have been altered or modied in design,
appearance or construction.
is warranty covers only the actual defects within the PRODUCT itself. IT DOES NOT cover costs of installation in (or
removal from) a xed installation, or normal setup, claims
based on any misrepresentation by the seller, or performance
variations resulting from installation related circumstances
such as signal quality, AC power or incompatibilities with
speakers and/or other system components.
During the warranty period, Atlantic Technology will, at its
option, either repair the defect, or repl ace the defective
product, or the defec tive parts, or components thereof at
n
o charge to the owner for parts and labor covered by this
warranty If necessary repairs are not covered by this warranty, or if a unit is examined which is not in need of repair,
you will be charged for the repairs and/or the examination.
If non-warranted repairs are needed, we will notify you of
t
he estimated cost and ask for your authorization to perform said repairs.
You must pay shipping charges incurred in getting your
Product to the factory. We will pay the return shipping
charges if the repairs are covered by the warranty. Please save
the original shipping cartons, as the unit MUST be returned
in the original carton and packing. (Replacement cartons are
available at a modest charge.)
If your product needs service, please call Atlantic Technology
at 781-762-6300.
You will need to present the original bill of sale to establish
the date of purchase. In the event that the proof of purchase
cannot be established with the original receipt, the warranty
period shall be determined by the earliest date of manufacture shown on the unit.
In the event that you wish to return your Atlantic Technology
Product back to us, for any reason, please call to arrange for
a Return Authorization Number. is will ensure that your
problem is discussed with a service technician who will determine if there is a quick solution to your problem.
Atlantic Technology shall not be liable for, in any way responsible for, any incidental or consequential damages of any
kind. Some states do not allow limitations on how long an
implied warranty lasts and/or do not allow the exclusion of
incidental or consequential damages; therefore, the limitations and exclusions stated herein may not apply to you.
is warranty gives you specic legal rights; and you may
also have other rights that vary from state to state.
THERE ARE NO WARRANTIES GIVEN BY ATLANTIC
TECHNOLOGY THAT EXTEND BEYOND THE DESCRIPTION GIVEN HEREIN. ANY IMPLIED WARRANTIES OF
FITNESS FOR PURPOSE SOLD, MERCHANTABILITY,
DESCRIPTION, QUALITY OR ANY OTHER MATTERS
ARE LIMITED TO THE TERMS OF THE EXPRESSED
LIMITED WARRANTY STATED HEREIN.
Products are sold on the basis of specications applicable
at the time of sales. Atlantic Technology shall have no obligation to modify products once they have been sold. is
warranty is applicable only in the United States. For applicability in other countries, please call Atlantic Technology.
WA-60
Wireless Audio System
Safety Precautions
CAUTION: To reduce the risk of electric shock, do not remove the cover
(or back). No user serviceable parts inside. Refer to qualied personnel.
WARNING:To reduce the risk of re or electric shock, do not expose this
appliance to rain or moisture. is de vice generates a fair amount of heat.
Make sure nothing blocks the ventilation to the rear panel of the unit.
e lightning ash with arrowhead, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that
may be of sufficient magnitude to constitute a risk of electrical
shock to persons.
e exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating maintenance (servicing) instructions in the literature accompanying
the appliance.
e contents of this manual are Copyright © 2016 by Atlantic
Technology International, Corp., and may not be duplicated or
reproduced by any means, whether physical, electronic or otherwise without prior written consent from Atlantic Technology
International, Corp.
Atlantic Technology and the Atlantic Technology logo are registered trademarks of Atlantic Technology International, Corp.
Specications are those in effect at the time of printing. Atlantic Technology
International, Corp. reserves the right to change specications or designs at
any time without notice without obligation to modify existing units.
FCC Compliance
is device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation
Changes or modications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
is equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. ese limits
are designed to provide reasonable protection against harmful interference
in a residential installation. is equipment generates and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particu lar
installation. If this equipment does cause harmfu l interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
To satisfy FCC RF exposure requirements, a separation distance of 20 cm
or more should be maintained between t his device and pers ons during
device operation.
To ensure compliance, operations at closer than this distance is not recommended. e antenna used for this transmitter must not be co-located in
conjunction with any other antenna or transmitter.
WA-60 Wireless Audio System
Congratulations on the purchase of an Atlantic Technology WA-60 Wireless Audio System. Never before
has it been so easy to distribute audio from one location in your home or business to anothe r than it is
right now.
In this document, we will walk you through the installation of the WA-60 system in just a few of the congurations that are possible with this high performance
wireless audio distribution system.
Specications
•
Wireless 20 hz to 20kHz sound
•
Robust and dedicated network for your audio
•
Easy setup, get wireless music in seconds
•
external Antenna
•
Range; Line of sight: 130-150´
•
Range; obstructed: 70´
•
No interference or delays
•
Works with both Mac & PC
•
Plug ’n play - No soware needed
•
Flexible multi-zone functionality
•
RF band: 2.4GHz
•
four channels
•
SNR: 93dB
Troubleshooting Guide
Once your subwoofer is set up, you should have many years of maintenance
free enjoyment from your system. However, if you should encounter a problem, refer to the following guide to help you nd the solution. If a problem
persists, you should contact your local authorized Atlantic Technology dealer.
Problem Solutions
a. Make sure both transmitter and receiver are
connected to a power supply
b. Switch to supplied USB AC Adapter
a. Make sure your WA-60-t and WA-60-r are
both set to the same “Zone”
b. WA-60-r may be out of range. Try moving
the receiver closer
a. Ensure that your source components are
functioning properly
b. Ensure that the audio levels are congured for
audible output (volume at source and/or
destination may be muted or turned too low)
WA-60-t and/or
WA-60-r are
connected but
Status LED does
not light up
No Wireless
Connection
(WA-60-tand
WA-60-r Status
lights are “Red”)
Your WA-60-t
and WA-60-r are
connected, but no
audio occurs
Package Content
NOTE: Please contact Customer Service if any of these items are missing.
Your WA-60 Wireless Audio System ships with
this Instruction Manual and the following items:
is required when the apparatus
has been damaged in any way,
such as power-supply cord or
plug is damaged, liquid has
been spilled or objects have
fallen into the apparatus, the
apparatus has been exposed
to rain or moisture, does not
operate normally, or has been
dropped.
• Adjust only those controls
that are covered by the
operating instructions as an
improper adjustment of other
controls may result in damage
and will oen require extensive
work by a qualied technician
to restore the apparatus to its
normal operation.
• Damage Requiring Service
Unplug the apparatus from the
wall outlet and refer servicing
to qualied service personnel
under the following conditions:
When the power-supply cord
or plug is damaged; If liquid
has been spilled, or objects
have fallen into the apparatus;
If the apparatus has been
exposed to rain or water;
If the apparatus does not
operate normally by following
Safety Instructions
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus
near water.
• Clean only with dry cloth.
• Do not block any ventilation
openings. Install in
accordancewith the
manufacturer’s instructions.
• Do not install near any heat
sources such as radiators,
heat registers, stoves, or
other apparatus that
produce heat.
• Protect the power cord from
being walked on or pinched
particularly at plugs, conven
ience receptacles, and the
point where they exit from
the apparatus.
• Only use attachments/
accessories specied by the
manufacturer.
• Unplug this apparatus during
lighting storms or when unused for long periods of time.
• Refer all servicing to qualied
services personnel. Servicing
the operating instructions;
If the apparatus has been
dropped or damaged in any
way, and; When the apparatus
exhibits a distinct change in
performance this indicates
a need for service.
• Object and Liquid Entry
Never push objects of any kind
into the apparatus through
openings as they may touch
dangerous voltage points or
short-out parts that could
result in a re or electric
shock. e apparatus shall not
be exposed to dripping or
splashing and no objects lled
with liquids, such as vases
shall be placed on the apparatus. Don’t put candles or
other burning objects on top
of this unit.
• is device has no power
switch. To disconnect this
device from power supply,
the power cord must be
disconnected.
• e power supply and power
cord for this apparatus is
intended for indoor use only.
• Only use the included A/C
adaptor
1. Connect the WA-60-t transmitter using the supplied power supply and micro-USB cable.
e front LED should turn a steady red and the blue LED will blink on and off.
2. Choose the appropriate cable to connect the WA-60-t to your chosen source.
Most computers and phones will use the 1/8˝ (3.5mm) connector.
Receivers and other sources may use the standard RCA cable.
3. Select the channel you want to use.
Consult the front panel of the WA-60-t for more information on selecting the channel.
Status LED
ere are two LED on each WA-60 transmitter
and receiver. A red power indicator and a blue
status indicator. e Red LED will remain lit as
long as the unit is on. e blue LED will either
ash or remain constant. If the blue LED is
ashing the receiver or transmitter is looking
for a signal. If the blue LED is constant the unit
has successfully paired with the receiver or
transmitter.
Connections and Congurations
Zone Switch
e WA-60 features four different
selectable channels. Be sure to set
both the transmitter and receiver
to the same channel.
Antenna connection
Analog input/output connection
Micro USB power port
Part 1: Connecting the WA-60-t Transmitter Part 2: Connecting the WA-60-r Receiver
1. Connect the WA-60-r Receiver using the supplied power supply and micro-USB cable.
e front LED should turn a steady red and the blue LED will blink on and off.
2. Choose the appropriate cable to connect the WA-60-r to your chosen component.
If you are connecting a subwoofer be sure to use the same input and output.
If you connect the receiver LFE out to the R input on the transmitter, connect the subwoofer to the R output on the receiver
3. Select the same channel you set the WA-60-t transmitter.
Consult the front panel of the WA-60-t for more information on selecting the channel.
4. e blue LED should switch to a steady blue when the receiver and transmitter are connected.
OR
Loading...