Atlantic Cozytouch Installation Manual
EN - Presentation
The Cozytouch Bridge allows you to control your “Cozytouch compatible” connected
Atlantic products. The Cozytouch application is free to download from Apple Store and
Google Play.
Caution
Please read this installation manual and the safety instructions before installing this product.
Please ensure that each of the instructions are followed and keep these instructions in a safe
place. Any installation or utilisation outside the defined scope of the application is noncompliant and may invalidate the warranty.
General safety information:
1. Do not attempt to open the bridge.
2. Avoid physical shocks.
3. Never immerse the unit in liquid.
4. Do not use abrasives or solvents to clean the product.
5. Do not use this product outdoors.
6. Any use or modification on this equipment not listed by this manual may result a danger
for the user.
The “switching off” of the product cannot be achieved by disconnecting the power plug.
Ethernet interface must never not be connected directly to a phone outlet. Please connect
to your DSL box or any other type of network switch or Ethernet hub.
Package Contents
1 x Bridge 1 x Power Supply 1 x Ethernet Cable 1 x manual
Product Description
PROG button
RESET button
The LED indicates the operating mode of the bridge:
- Green light: established internet connection
- Red light: no internet connection
- Flashing LED (green, orange or red): connection in progress
PROG and RESET buttons have no action for the moment in Cozytouch App.
RJ45 Ethernet
connector
Supply
LED
Requirements for installation
An internet connection is required - DSL box equipped with an Ethernet port. Place the bridge
at a minimum distance of 30cm from the internet modem. Do not place the bridge on a metal
surface.
Installation
Connect the bridge to your DSL box, by plugging the Ethernet cable on the Ethernet
connector represented by the logo .
Connect the included power supply to the connector. The USB can be directly connected to
an internet box where compatible for the power supply.
Then the LED will light up by changing color for a few tens of seconds and finally will stay
green.
Loading...