ATEQ VT 56025, VT 56 User Manual
USER GUIDE
ATEQ VT 56025
Version DA1-03
Reference: UM-36600A-U
REVISION OF THE ATEQ VT56025 MANUAL
Due to continuing improvements, the information contained in this user manual, the features and design
of this device are subject to be changed without prior notice.
Edition/
Revision
Reference
Date
(week/year)
Chapters updated
First edition
UM-36600A-U
05/2014
-----
UM-36600A-U
User manual ATEQ VT56025 Page 1
TABLE OF CONTENTS
Table of contents
User guide 2
TPMS TOOL.................................................................................................................... 2
1. SPECIFICATIONS .......................................................................................................................... 2
2. IMPORTANT SAFETY INSTRUCTIONS ......................................................................................... 3
3. CAUTION ....................................................................................................................................... 4
4. FUNCTION KEYS ........................................................................................................................... 5
5. POWER ON. ................................................................................................................................... 7
6. OPERATING INSTRUCTIONS ........................................................................................................ 8
VT56025 USE .................................................................................................................. 9
1. CHECK SENSOR ........................................................................................................................... 9
2. SERVICE TPMS ........................................................................................................................... 13
3. HISTORY. ..................................................................................................................................... 20
4. SETTINGS. ................................................................................................................................... 21
5. ABOUT ......................................................................................................................................... 28
6. PROGRAM BLANK SENSOR....................................................................................................... 29
MISCELLANEOUS ........................................................................................................ 34
1. CHARGE ...................................................................................................................................... 34
2. PRINT SENSOR DETAILS ............................................................................................................ 35
3. TROUBLESHOOTING .................................................................................................................. 36
4. TOOL UPDATE ............................................................................................................................ 36
5. LIMITED HARDWARE WARRANTY ............................................................................................. 39
6. SAFETY BATTERY AND CHARGE INFORMATION ..................................................................... 40
7. RECYCLING ................................................................................................................................. 41
Index 42
UM-36600A-U
User manual ATEQ VT56025 Page 2
TPMS TOOL user
guide
User guide
TPMS TOOL
1.
SPECIFICATIONS
Battery Type:
Rechargeable Lithium Ion
Battery Life:
Approximately 1,000 activations per full charge.
Dimensions (Max. L,W,D):
7.9" x 4.7" x 1.6" (20.0 cm x 12.0 cm x 4.0 cm).
Case Material:
High Impact ABS.
Response Frequency:
Main frequencies: 315 MHz and 433.92 MHz (supporting
most specific frequencies).
Low Battery Indication:
LCD bar graph display.
Weight:
Approx. 2 lbs.
Temperatures:
Operating: -4° F to 131° F (-20° C to +45° C).
Storage: -4° F to 131° F (-20° C to +45° C).
Product content:
y
VT56025 TPMS Instrument.
y
USB cable.
y
RJ45 cable.
Option accessories:
y
OBDII Module.
y
Re-Learn Magnet (option).
y
Docking Station (option).
y
IrDA Printer (option).
UM-36600A-U
User manual ATEQ VT56025 Page 3
TPMS TOOL user
guide
2.
IMPORTANT SAFETY INSTRUCTIONS
Do not discard. Retain for future reference.
This device complies with Part 15 of the FCC Rules
Operation is subject to the following two conditions:
(1) This device will not cause harmful interference, and
(2) This device will accept any interference received, including interference that may
cause undesired or improper operation.
WARNING: This product emits electromagnetic and electronically
generated waves that may interfere with the safe operation of
pacemakers.
Individuals that have pacemakers should never use this product.
WARNING:
Do not use on live electrical circuits.
Must read instructions before use.
Wear safety goggles. (User and bystanders).
Risk of entanglement.
Read the Warranty, Safety and Recycling information at the end of this user guide.
TPMS TOOL user
guide
UM-36600A-U User ma
nual
ATEQ
VT56025
Page
4
3.
CAUTION
READ THESE INSTRUCTIONS BEFORE USING
Your Tire Pressure Monitoring (TPM) tool has been designed to be durable, safe, and
reliable when properly used.
All TPMS TOOLS are intended to be used only by qualified and trained automotive
technicians or a in light industrial repair shop environment. Please read all instructions
below before using. Always follow these safety instructions. If you have any questions
pertaining to the safe or reliability use of this tool, please call your local dealer.
1.
Read All Instructions
All warnings on the tool and in this manual should be adhered to. All operating instructions
should be followed.
2.
Retain Instructions
The safety and operating instructions should be retained for future reference.
3.
Heed Warnings
User and bystanders must wear safety goggles and must read instructions before use. Do
not use on live electrical circuits, risk of entanglement.
4.
Cleaning
Clean with a soft dry cloth, or if necessary, a soft damp cloth. Do not use any harsh
chemical solvents such as acetone, thinner, brake cleaner, alcohol, etc as this may
damage the plastic surface.
5.
Water & Moisture
Do not use this tool where contact or immersion in water is a possibility. Never spill liquid
of any kind onto the tool.
6.
Storage
Do not use or store the tool in an area where it is exposed to direct sunlight or excessive
moisture.
7.
Use
To reduce the risk of fire, do not operate the tool in the vicinity of open containers or
flammable liquids. Do not use if the potential for explosive gas or vapors exists. Keep the
tool away from heat generating sources. Do not operate the tool with the battery cover
removed.
TPMS TOOL user
guide
UM-36600A-U User ma
nual
ATEQ
VT56025
Page
5
Power ON /OFF switch
Test or trigger sensor.
Next, continue or confirm.
Cancel, previous step.
Navigate to select "up”.
Navigate to select “down”.
Navigate to select “left”.
Navigate to select “right”.
4.
FUNCTION KEYS
Battery status
Result lights
Battery charge
indicator
Trigger light
TPMS TOOL user
guide
UM-36600A-U User ma
nual
ATEQ
VT56025
Page
6
Header icons
The tool is plugged on USB.
The OBD module is plugged to the tool.
The Bluetooth is on (not available).
The Wifi is on (not available).
Wifi signal strength = 100%; = 66%; = 33%.
A message is arrived (not available).
BOTTOM ICONS
This icon is to back to the home page.
This icon must be selected to send sensors data to the ECU.
This icon is to delete the current sensors displayed.
This icon is to send the sensor data to the printer.
TPMS TOOL user
guide
UM-36600A-U User ma
nual
ATEQ
VT56025
Page
7
5.
POWER ON
Press key to turn on device, the TPMS TOOL.
The tool displays a first start picture.
Wait a few seconds and the tool
displays the main menu.
The tool is ready to operate.
To power off the tool, press and hold (about 3 seconds) the key.
TPMS TOOL user
guide
UM-36600A-U User ma
nual
ATEQ
VT56025
Page
8
6.
OPERATING INSTRUCTIONS
TPMS TOOL OVERVIEW
Read and diagnose sensors, OBD2 ECU reset and transfer data to ECU.
Note: With most vehicles, if the vehicle is in “learn mode” the vehicle will also confirm that
the TPM sensor has communicated to the ECM with a series of horn beeps.
Service Procedure
Section 1.0: Read Sensor Test
Before servicing the tires/wheels, using your TPMS TOOL, trigger each
of the vehicle's sensors to make sure they are working properly.
This will eliminate the liability associated with replacing previously damaged or defective
sensors. This procedure will not change the vehicle settings because the vehicle has yet to
be put into learn/retraining mode. This procedure allows you to quickly identify damaged or
defective sensors, because some vehicles do not report a damaged or defective sensor
condition on the instrument cluster for up to 20 minutes.
Note: If the sensors do not trigger, please refer to the Troubleshooting section of this Guide.
Perform tire/wheel service.
For vehicles that require retraining, please see to Section 2.0
Section 2.0: Learning TPM System
With the vehicle in learn mode, begin by triggering the driver's front left (LF)
wheel sensor. Many vehicles will provide an audible chirp confirming that
the sensor ID has been learned by the vehicle on board computer.
The communication between the sensor and the on board computer
is also confirmed on LCD display of the TOOL.
The same procedure should be followed on all wheel sensors, in a
clockwise rotation, until all the vehicle sensors have been retrained.
After triggering the driver's rear wheel sensor, some vehicles will
chirp twice indicating that the TPM system has been retrained.
1 Start FL
4 End RL
Fig. 1
FR 2
RR 3
For vehicles that do not require retraining, we recommend you trigger each wheel sensor, one
final time, to make sure they are working correctly prior to releasing the vehicle to the customer.
TPMS TOOL user
guide
UM-36600A-U User ma
nual
ATEQ
VT56025
Page
9
VT56025 USE
IMPORTANT:
Vehicle specific information in this manual is used as an example and may not
represent specific instructions each make and model may require. When performing
various functions with the tool, it is important to refer to the on-screen prompts
and/or repair manual information.
Warning! For best sensor triggering, hold the tool
against the tire sidewall right above the sensor.
1.
CHECK SENSOR
This is to trigger all the sensors on the vehicle and reprogram the id's in the ECU through
OBD port.
Continue
SELECT CAR MANUFACTURER
= Continue
= Previous
TPMS TOOL user
guide
UM-36600A-U User ma
nual
ATEQ
VT56025
Page
10
SELECT VEHICLE MODEL
SELECT YEAR
TEST SENSORS
The tool is ready to
trigger sensors.
To scroll wheels.
The tool is triggering the sensor.
= Continue
= Previous
= Continue
= Previous
TPMS TOOL user
guide
UM-36600A-U User ma
nual
ATEQ
VT56025
Page
11
LF
The tool is triggering the sensor.
= Continue = Previous and erase results
Trigger all wheels.
RF
RR
LR
= Continue = Previous and erase results
LF
The tool has not detected a sensor. Try again.
= Continue = Previous and erase results = Next wheel.
TPMS TOOL user
guide
UM-36600A-U User ma
nual
ATEQ
VT56025
Page
12
REPROGRAM ECU THROUGH OBD2 PORT
After all sensor IDs is read and displayed on the tool, connect
OBD module to the tool. The OBDII icon appears on the header
to confirm.
Plug OBD2 module to the OBD2 port on vehicle, and turn
ignition on.
Select the OBD
button .
Note: Keep the
engine OFF.
The transfer begins.
The following
messages appear
briefly.
CONNECTED
TRANSFER OK
VERIFY OK
SUCCESSFUL
TRANSFER
= Continue
= Previous
= Continue
= Previous
= Continue
= Previous
= Previous
The data transfer to the ECU is complete. OBD2 module must be unplugged from the DLC
connector.
Loading...