This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy, and if not installed and used in accordance with the
instruction manual, may cause interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
Reorient or relocate the receiving antenna;
Increase the separation between the equipment and receiver;
Connect the equipment into an outlet on a circuit different from that
which the receiver is connected;
Consult the dealer/an experienced radio/television technician for help.
RoHS
This product is RoHS compliant.
SJ/T 11364-2006
The following contains information that relates to China.
ii
CS1642 / CS1644 User Manual
User Information
Online Registration
Be sure to register your product at our online support center:
Internationalhttp://support.aten.com
North AmericaATEN TECHhttp://www.aten-usa.com/product_registration
ATEN NJhttp://support.aten.com
Telephone Support
For telephone support, call this number:
International886-2-8692-6959
North AmericaATEN TECH1-888-999-ATEN
ATEN NJ1-732-356-1703
User Notice
All information, documentation, and specifications contained in this manual
are subject to change without prior notification by the manufacturer. The
manufacturer makes no representations or warranties, either expressed or
implied, with respect to the contents hereof and specifically disclaims any
warranties as to merchantability or fitness for any particular purpose. Any of
the manufacturer's software described in this manual is sold or licensed as is.
Should the programs prove defective following their purchase, the buyer (and
not the manufacturer, its distributor, or its dealer), assumes the entire cost of all
necessary servicing, repair and any incidental or consequential damages
resulting from any defect in the software.
The manufacturer of this system is not responsible for any radio and/or TV
interference caused by unauthorized modifications to this device. It is the
responsibility of the user to correct such interference.
The manufacturer is not responsible for any damage incurred in the operation
of this system if the correct operational voltage setting was not selected prior
to operation. PLEASE VERIFY THAT THE VOLTAGE SETTING IS
CORRECT BEFORE USE.
ATEN and the ATEN logo are registered trademarks of ATEN International Co., Ltd. All rights reserved.
All other brand names and trademarks are the registered property of their respective owners.
Package Contents
The CS1642 / CS1644 package consists of:
1 CS1642 / CS1644 USB 2.0 DVI Dual View KVMP Switch
2 Custom USB DVI Dual Link 1.8 m Cables Sets (CS1642)
2 Custom DVI Dual Link 1.8 m Cables (CS1642)
4 Custom USB DVI Dual Link 1.8 m Cable Sets (CS1644)
4 Custom DVI Dual Link 1.8 m Cables (CS1644)
1 USB-to-PS/2 Converter
1 Firmware Upgrade Cable
1 Power Adapter
1 User Manual*
1 Quick Start Guide
Check to make sure that all the components are present and that nothing got
damaged in shipping. If you encounter a problem, contact your dealer.
Read this manual thoroughly and follow the installation and operation
procedures carefully to prevent any damage to the unit, and/or any of the
devices connected to it.
* Features may have been added to the CS1642 / CS1644 since this manual
was printed. Please visit our website to download the most up-to-date version
of the manual.
This User Manual is provided to help you get the most from your system. It
covers all aspects of installation, configuration and operation. An overview of
the information found in the manual is provided below.
Chapter 1, Introduction, introduces you to the CS1642 / CS1644 system.
Its purpose, features and benefits are presented, and its front and back panel
components are described.
Chapter 2, Hardware Setup, describes how to set up your installation.
Diagrams showing the necessary steps are provided.
Chapter 3, Basic Operation, explains the fundamental concepts involved
in operating the CS1642 / CS1644.
Chapter 4, Keyboard Port Operation, details all of the concepts and
procedures involved in the keyboard hotkey operation of your CS1642 /
CS1644 installation.
Chapter 5, Keyboard Emulation, provides tables that list the PC to Mac
and PC to Sun keyboard emulation mappings.
Chapter 6, The Firmware Upgrade Utility, explains how to use this
utility to upgrade the CS1642 / CS1644's firmware with the latest available
versions.
An Appendix, provides specifications and other technical information
regarding the CS1642 / CS1644.
vii
CS1642 / CS1644 User Manual
Conventions
This manual uses the following conventions:
MonospacedIndicates text that you should key in.
[ ]Indicates keys you should press. For example, [Enter] means to
press the Enter key. If keys need to be chorded, they appear
together in the same bracket with a plus sign between them:
[Ctrl+Alt].
1.Numbered lists represent procedures with sequential steps.
♦Bullet lists provide information, but do not involve sequential steps.
→Indicates selecting the option (on a menu or dialog box, for
example), that comes next. For example, Start
open the Start menu, and then select Run.
Indicates critical information.
Product Information
→ Run means to
For information about all ATEN products and how they can help you connect
without limits, visit ATEN on the Web or contact an ATEN Authorized
Reseller. Visit ATEN on the Web for a list of locations and telephone numbers:
Internationalhttp://www.aten.com
North AmericaATEN TECHhttp://www.aten-usa.com
ATEN NJhttp://www.aten.com
viii
Chapter 1
Introduction
Overview
The CubiQ CS1642 / CS1644 USB 2.0 DVI Dual View KVMP Switch charts
a revolutionary new direction in KVM (Keyboard, Video, Mouse) switch
functionality by combining a 2/4-port KVM switch with a 2-port USB 2.0 hub
at the same time as providing dual-screen support for two DVI displays,
making it ideal for graphic designers, banking and finance consultants, medical
applications, and gamers. The CS1642 / CS1644 supports 2.1 channel surround
sound to give a theater digital audio experience that enlivens video playback.
As a KVM switch, it allows users to access four computers with dual-screen
support from a single USB keyboard, USB mouse, and dual-screen console. As
a USB hub, it permits each computer to access any peripherals connected to the
hub on a “one computer at a time” basis.
The CS1642 / CS1644’s independent (asynchronous) switching feature allows
the KVM focus to be on one computer while the USB peripheral focus is on
another. This eliminates the need to purchase a separate USB hub as well as the
need to purchase separate stand-alone peripheral sharers.
The CS1642 / CS1644 further improves on previous designs with DVI (Digital
Visual Interface) connectors, and the transfer of keyboard and mouse data to
the computers via a fast, reliable USB connection. DVI supports both digital
video input (flat panel displays, data projectors, plasma displays, digital TVs
and set-top boxes) and analog video input (traditional monitors and TVs).
In addition to the CS1642 / CS1644’s 2.1 channel surround sound
functionality, a single microphone can provide audio input to each of the
computers, and you can listen to the audio output of each computer on a single
set of speakers (on a one-at-a-time basis). As with the USB peripherals, the
audio focus can be independent of the KVM focus.
Setup is fast and easy; simply plug cables into their appropriate ports. There is
no software to configure, no installation routines, and no incompatibility
problems. Since the CS1642 / CS1644 intercepts keyboard input directly, it
will work on multiple computing platforms (PC (x86/x64), Macintosh
PowerPC, and Sun Microsystems Sparc). There are two convenient methods to
access the computers: port selection pushbuttons located on the unit’s front
panel; and hotkey combinations entered from the keyboard.
1
CS1642 / CS1644 User Manual
Features
2/4-port DVI Dual View KVMP switch with USB 2.0 support and 2.1
channel surround sound audio
One dual-screen USB console controls two/four dual-screen computers
and two additional USB devices
2-port USB 2.0 hub built in
Fully compliant with the USB 2.0 specification
Full bass response provides a rich experience for 2.1 channel surround
sound systems
Independent switching of KVM, USB, and Audio focus
DVI digital and analog monitor support – fully compliant with the DVI
specifications; also HDCP compliant
Superior video quality – 2560x1600 (DVI Dual Link); 1920x1200 (DVI
Single Link)
Supports widescreen resolutions
Computer selection via front panel pushbuttons and hotkeys
Multiplatform support – Windows 2000/XP/Vista, Linux*, Mac, Sun, and
FreeBSD
Console mouse port emulation/bypass feature supports most mouse
drivers and multifunction mice
Video DynaSync– stores the console monitors EDID (Extended Display
Identification Data) to optimize display resolution
Complete keyboard emulation for error-free booting
Sun/Mac keyboard support and emulation
Auto Scan Mode for monitoring all computers
Firmware upgradable
* Supports Linux Kernel 2.6 and higher. The CS1642 / CS1644 has a built-in
USB 2.0 hub, so will not support PCs or OS that do not support USB 2.0.
2
Chapter 1. Introduction
Requirements
Console
Two DVI compatible monitors capable of the highest possible resolution
A USB mouse
A USB keyboard
Microphone and speakers
Note: A PS/2 keyboard and mouse can be used by using the converter
included in the CS1642 / CS1644 package.
Computers
The following equipment must be available on each computer:
Two DVI ports
Note: 1. The quality of the display is affected by the quality of the DVI
display cards. For best results, we recommend you purchase a
high quality product.
USB Type A port
Audio ports (optional)
Cables
CS1642
Two 1.8 m custom USB DVI Dual Link cable sets and two 1.8 m DVI Dual
Link cables are provided in the CS1642 package.
CS1644
Four 1.8 m custom USB DVI Dual Link cable sets and four 1.8 m DVI Dual
Link cables are provided in the CS1644 package.
3
CS1642 / CS1644 User Manual
Operating Systems
Supported operating systems are shown in the table, below:
OSVer sio n
Windows2000 and higher
LinuxRedHat9.0 and higher; Fedora Core 4 and higher
SuSE9.0 and higher
UNIXAIX4.3 and higher
FreeBSD4.2 and higher
SunSolaris 9 and higher
NovellNetware6.0 and higher
MacOS 9 and higher
DOS6.22 and higher
Note: Supports Linux Kernel 2.6 and higher.
4
Components
4
5
1
3
2
2
322
CS1642 Front View
CS1642 LED Status Panel Detail
Chapter 1. Introduction
Note: The Mode Selection KVM LED icon is a monitor. The Port
Selection KVM LED icon is the Port number.
5
CS1642 / CS1644 User Manual
1
245
32
322
CS1644 Front View
CS1644 LED Status Panel Detail
6
Loading...
+ 32 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.