FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE
STATEMENT: This equipment has been tested and found to comply with the
limits for a Class B digital service, pursuant to Part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. Any changes or modifications made
to this equipment may void the user’s authority to operate this equipment.
This equipment generates, uses, and can radiate radio frequency energy. If not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate this
equipment.
This dev ice complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
KCC Statement
ii
RoHS
This product is RoHS compliant.
CS231 / CS231TK User Manual
iii
CS231 / CS231TK User Manual
User Information
Online Registration
Be sure to register your product at our online support center:
Internationalhttp://eservice.aten.com
Telephone Support
For telephone support, call this number:
International886-2-8692-6959
China86-400-810-0-810
Japan81-3-5615-5811
Korea82-2-467-6789
North America1-888-999-ATEN ext 4988
1- 949-428-1111
User Notice
All information, documentation, and specifications contained in this manual are
subject to change without prior notification by the manufacturer. The
manufacturer makes no representations or warranties, either expressed or
implied, with respect to the contents hereof and specifically disclaims any
warranties as to merchantability or fitness for any particular purpose. Any of the
manufacturer's software described in this manual is sold or licensed as is.
Should the programs prove defective following their purchase, the buyer (and
not the manufacturer, its distributor, or its dealer), assumes the entire cost of all
necessary servicing, repair and any incidental or consequential damages
resulting from any defect in the software.
The manufacturer of this system is not responsible for any radio and/or TV
interference caused by unauthorized modifications to this device. It is the
responsibility of the user to correct such interference.
The manufacturer is not responsible for any damage incurred in the operation
of this system if the correct operational voltage setting was not selected prior to
operation. PLEASE VERIFY THAT THE VOLTAGE SETTING IS CORRECT
Altusen and the Altusen logo are registered trademarks of ATEN International Co., Ltd. All rights reserved.
All other brand names and trademarks are the registered property of their respective owners.
CS231
1 CS231 Computer Sharing Device
1 USB KVM Cable
1 Power Adapter
1 Firmware Upgrade Cable
1 DIP Switch Sticker
1 User Instructions*
CS231TK
1 CS231 Computer Sharing Device
1 USB KVM Cable
1 Power Adapter
1 Firmware Upgrade Cable
CS231 / CS231TK User Manual
1 DIP Switch Sticker
1 2XRT-0015G KVM over IP Access Control Box
1 User Instructions* (2XRT-0015G KVM over IP Access Control Box only)
Note: 1. * Features may have been added to the KVM over IP console station
since the user instructions were created. Please visit our website to
download the most up-to-date version of the user manual
2. Make sure that all of the components are present and in good order. If
anything is missing or was damaged in shipping, contact your dealer.
3. Read this manual thoroughly and follow the installation and operation
procedures carefully to prevent any damage to the unit, and/or any of
the devices connected to it.
[ ]Indicates keys you should press. For example, [Enter] means to
press the Enter key. If keys need to be chorded, they appear
together in the same bracket with a plus sign between them:
[Ctrl+Alt].
1.Numbered lists represent procedures with sequential steps.
♦Bullet lists provide information, but do not involve sequential steps.
→Indicates selecting the option (on a menu or dialog box, for
example), that comes next. For example, Start
open the Start menu, and then select Run.
Indicates critical information.
Product Information
CS231 / CS231TK User Manual
→
Run means to
For information about all ATEN products and how they can help you connect
without limits, visit ATEN on the Web or contact an ATEN Authorized Reseller.
Visit ATEN on the Web for a list of locations and telephone numbers:
Internationalhttp://www.aten.com
North Americahttp://www.aten-usa.com
ix
CS231 / CS231TK User Manual
This Page Intentionally Left Blank
x
Chapter 1
Introduction
Overview
The CS231 / CS231TK is a powerful, micro-processor controlled computer
sharing device. It is a multi-user, single-tasking device that enables two users
to share the use of a single USB or PS/2 computer from two separate consoles
(USB keyboard, USB mouse, and monitor).
The CS231 / CS231TK is ideal for small office and home office (SOHO)
environments. All programs, files and resources on the computer can be easily
accessed and shared by both users without the bother and expense of setting up
a costly network environment.
CS231TK is CS231 that bundled with KVM over IP Access Control Box. The
2XRT-0015G KVM over IP Access Control Box allows users to enable or
disable remote over IP control privilege by simply pressing a control button.
It’s fast and easy to set up the 2XRT-0015G. Simply plug the 2XRT-0015G’s
cables to the CS231 / CS231TK. There is no need to install software or
configure devices - just plug and play,.
In addition, the cable length of the 2XRT-0015G reaches 5 meters, enabling
connection to the transmitter over longer distances for more flexible
installation.
1
Loading...
+ 25 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.