Atec TSI-8525 User Manual
P-TRAK® ULTRAFINE
PARTICLE COUNTER
MODEL 8525
The TSI’s P-Trak® Ultrane Particle Counter (UPC) 8525 is an
ideal instrument for measuring workplace ultrane particulate levels,
as well as helping eliminate indoor air quality (IAQ) problems. This
portable instrument detects and counts ultrane particles (smaller
than one micrometer) that often accompany or signal the presence
of a pollutant that is the root cause of complaints.
Ultrane particles are dened as having a diameter less than 0.1 m
(or 100 nm). Engineered nanoparticles (nanomaterials) are a subset of
ultrane particles with dimensions from 1 to 100 nm. Nanomaterials
are produced and used for industrial and high-tech applications, while
ultrane particles are the byproducts of combustion and other chemical
reactions. Unfortunately, the occupational health risks associated with
manufacturing and using nanomaterials are not clearly understood. As
a result, a need has arisen to assess workplace conditions. Using TSI’s
proven technology, the P-Trak gives direct, real-time measurement of
workplace ultrane particulate levels.
The P-Trak UPC also locates obvious pollutant sources such as boilers,
furnaces, and vehicles, and it also detects the not-so-obvious sources
such as photocopy machines and printers. Use this instrument to detect
the migration of toxic exhaust gases, malfunctioning oce equipment,
pinhole gasket leaks in boilers and a wide variety of other problems.
Applications
+ Check oce equipment
+ Clean room containment checks
+ Filter checks
+ Check fume hoods
+ Check safety cabinets
+ Vehicle emission migration
+ Combustion leaks
+ Control smoking areas
Features and Benets
+ Real-time ultrane particle counter
+ Solves tough IAQ problems
+ Easy to use
+ Data log information
UNDERSTANDING, ACCELERATED
SPECIFICATIONS
PTRAK ULTRAFINE PARTICLE COUNTER
MODELS 8525
Concentration Range
0 to 5 x 105 particles/cm
3
Particle Size Range
0.02 to 1 micrometer
Temperature Range
Operation 32 to 100°F (0 to 38°C)
Storage -40 to 160°F (-40 to 70°C)
Flow Rate
Sample 100 cm3/min
Total 700 cm3/min (nominal)
Power Requirement
Battery type 6 AA alkaline
Battery life 6 hrs at 70°F (21°C)
Alcohol Requirement
Type 100% reagent grade isopropyl
Hours per charge 8 hours at 70°F (21°C)
RS232 Output
Baud rate 9600
Memory
Single points 470
Data logging 1,000 hours at one-minute intervals.
A maximum of 141 separate tests.
1
Size (H x W x D)
10.75 in. x 5.5 in. x 5.5 in. (27 cm x 14 cm x 14 cm)
Weight
Instrument with batteries 3.8 lbs (1.7 kg)
Factory Recalibration Interval One year
Warranty
Two years on parts and labor
2
Computer Requirements
PC with Microsoft Windows® 2000 or XP; Windows-compatible printer; 5 MB
hard disk space; and available RS232 serial port (for downloading)
P-Trak Ultrane Particle Counter and accessories includes: Telescoping Sample Probe,
Shoulder Strap, Inlet Screen, Spare Wicks (2), Alkaline Batteries, Alcohol Fill Capsule
with Storage Cap, Reagent Grade Isopropyl Alcohol, Zero Filters (2), Carrying Case,
TrakPro™ Software, Computer Cable, Operation and Service Manual, Calibration
Certicate, and Two-year Warranty.
Easy-to-use TrakPro™ Data Analysis Software stores,
organizes and reports test results.
UNDERSTANDING, ACCELERATED
TSI Incorporated
USA Tel: +1 800 874 2811
UK Tel: +44 149 4 459200
France Tel: +33 4 91 11 87 64
- Visit our website www.tsi.com for more information.
India Tel: +91 80 67877200
China Tel: +86 10 8251 6588
Singapore Tel: +65 6595 6388
Germany Tel: +49 241 523030
Printed in U.S.A.
P/N 2980197 Rev D ©2012 TSI Incorporated
1 The P-Trak will operate with an AC adapter for long periods but the alcohol wick
must be resaturated every 8 hours when operating over an extended time.
2 Warranty repairs returned via overnight carrier at TSI expense.
Specications are subject to change without notice.
P-Trak, TSI and the TSI logo are registered trademarks, and TrakPro is a trademark
of TSI Incorporated.
Microsoft and Windows are registered trademarks of Microsoft Corporation
in the United States and/or other countries.
Loading...