Atec Tir User Manual
Fluke TiR1 and
TiR Thermal Imagers
Optimized for building
envelope, restoration and
remediation, inspection
and roofing applications.
The new Fluke TiR1 and TiR Thermal Imagers are the perfect
imagers for building envelope, restoration and remediation,
inspection and roofing applications.
• All Fluke imagers come with IR-Fusion
camera and software (combines visible image with IR image
in full screen or picture-in-picture views) for easy identification and reporting of problems
• Rugged and reliable: Engineered to withstand a 2 m
(6.5 ft) drop
• 9.1 cm (3.6 in) diagonal landscape color VGA
(640 x 480) LCD
• Temperature range and thermal sensitivity optimized for
building diagnostics applications
• Excellent thermal sensitivity for seeing even small
temperature differences (which could indicate problems)
• Adjustable hand strap for left- or right-handed users
• Manufactured in the U.S.A.
Technical Data
®
Technology both in
IR-Fusion® Technology
See things both ways—Infrared and
visual (visible light) images fused
together communicating critical information faster and easier—traditional
infrared images are no longer enough.
Fluke led the way in the development
and use of IR-Fusion and the industry followed. Both visible and infrared
images allow you to communicate
exactly where potential savings can be
gained. IR-Fusion is standard on Fluke
TiR1 and TiR models.
Detailed specifications
Fluke TiR1 Fluke TiR
Temperature
Temperature measurement range
(not calibrated below -10 °C)
Accuracy ± 2 °C or 2 % (whichever is greater) ± 5 °C or 5 % (whichever is greater)
Measurement modes Smooth auto-scaling and manual scaling
On-screen emissivity correction Yes —
Imaging performance
Field of view 23° x 17°
Spatial resolution (IFOV) 2.5 mRad
Minimum focus distance Thermal lens: 15 cm (6 in); Visible (visual) light lens: 46 cm (18 in)
Focus Manual, one-handed focus
Image frequency 9 Hz refresh rate
Detector type 160 X 120 focal plane array, uncooled microbolometer
Infrared lens type 20 mm F = 0.8 lens
Thermal sensitivity (NETD) ≤ 0.07 °C at 30 °C (70 mK) ≤ 0.1 °C at 30 °C (100 mK)
Infrared spectral band 7.5 μm to 14 μm
Visual camera 640 x 480 resolution
Image presentation
Palettes Ironbow, blue-red, high contrast,
amber, hot metal, grey
Level and span Smooth auto-scaling and manual scaling of level and span
Minimum span (in manual mode) 2.5 °C (4.5 °F)
Minimum span (in auto mode) 5 °C (9 °F)
®
IR-Fusion
information Full Infrared with MAX, MID, or MIN
automatic blending; and Picture-in-Picture
with MAX, MID, or MIN automatic blending
Visual and IR blending
Picture-In-Picture (PIP) Three levels of on-screen IR blending
displayed in center 320 x 240 pixels
Full screen (PIP off) Three levels of on-screen IR blending
displayed in center 640 x 480 LCD
Voice annotation
Voice annotation 60 seconds maximum recording time per image —
Image and data storage
Storage medium SD memory card (2 GB memory card will store at least 1200 fully radiometric (.is2) IR and linked
visual images each with 60 seconds voice annotations or 3000 basic (.bmp) IR images
File formats Non-radiometric (.bmp) or fully-radiometric (.is2)
Export file formats
®
w/SmartView
software
-20 °C to +100 °C (-4 °F to + 212 °F)
Ironbow, blue-red, high contrast, grey
Full Infrared or Picture-in-Picture
100 % IR displayed in center
320 x 240 pixels
100 % IR displayed in center
640 x 480 LCD
No analysis software required for .bmp files
JPEG, BMP, GIF, PNG, TIFF, WMF, EXIF, and EMF
2 Fluke Corporation TiR1 and TiR Thermal Imagers
Loading...